Fiber Cement Siding definition

Fiber Cement Siding means and refer to a substance that is not a Masonry product, but is a mix of Portland cement, ground sand, cellulose fiber, and various additives mixed with water and manufactured into a siding material.
Fiber Cement Siding means and refer to a substance that is not a Masonry product, but is a mix of Portland cement, ground sand, cellulose fiber, and various additives mixed with water and manufactured into a siding material“Exhibit E” shall mean and refer to the Typical Building base Landscaping Plan attached hereto as Exhibit E and made part of this Union Street Flats PUD.

Examples of Fiber Cement Siding in a sentence

  • See In reHardieplank Fiber Cement Siding Litig., No. 12-MD-2359, 2014 WL 2987657, at *3 (D.

  • See Hardieplank Fiber Cement Siding Litig., No. 12-MD-2359, 2014WL 2987657, at *3 (D.

  • As this Court previously stated in its July 2013 Order, “[t]o ultimately succeed on a California express warranty claim, either reliance or privity is required.” In re Hardieplank Fiber Cement Siding Litig.,No. 12-MD-2359, 2013 WL 3717743, at *16 (D.

  • As previously explained with regard to Plaintiff Kavianpour, the Court holds that Hardie’s statement in its advertising that its siding came with a 50- year warranty does not constitute a warranty of future performance.Additionally, “[v]ague statements concerning product longevity do not comply with the requirement of a ‘specific reference to a future time’ that would create a warranty of future performance.” In re Hardieplank Fiber Cement Siding Litig.,No. 12-MD-2359, 2014 WL 2987657, at *3 (D.

  • The vents shall have at least 1 square inch of vent area for every 24 inches of wall.4. Panel Siding with 3/8 inch clear airspace with 3/8 inch continuous slot vent openings at both the top and bottom of each wall.5. Wood, Wood Based, or Fiber Cement Siding with either a 1/4 inch clear airspace; or alternatively a 1/4 inch gap between the horizontal siding laps6.

  • Wood, Fiber Cement Siding, or equivalent trim at corners, frieze boards, window and door wraps, and as transitional material between two different exterior materials.

  • Fiber Cement Siding: Remove dirt, dust and other foreign matter with a stiff fiber brush.

  • Fiber Cement Siding, Metal or Wood Post shall not be used on the supporting base and structure.

  • Wood, Fiber Cement Siding, or equivalent trim at corners (at least five (5) inches in width), frieze boards, window and door wraps, and as transitional material between two different Exterior Materials.

  • In re Prudential, 148 F.3d at 341 (“Multiples ranging from one to four are frequently awarded in common fund cases when the lodestar method is applied.”) (internal quotations omitted); In re CertainTeed Fiber Cement Siding Litig., 303 F.R.D.199 (E.D. Pa. 2014) (approving fees where lodestar multiplier was 2.6).

Related to Fiber Cement Siding

  • Certified cabinet x-ray system means an x-ray system that has been certified in accordance with 21 CFR 1010.2 as being manufactured and assembled pursuant to the provisions of 21 CFR 1020.40.

  • Mid-Span Fiber Meet An Interconnection architecture whereby two carriers’ fiber transmission facilities meet at a mutually agreed upon point for the mutual exchange of traffic, subject to the trunking requirements and other terms and provisions of this Agreement. The “point” of Interconnection for purposes of 47 U.S.C §§251(c)(2) and 251(c)(3) remains on CenturyLink’s network and is limited to the Interconnection of facilities between the CenturyLink Serving Wire Center and the location of the CLEC switch or other equipment located within the area served by the CenturyLink Serving Wire Center. Minutes of Use: Shall be abbreviated as MOU. Multiple Exchange Carrier Access Billing (MECAB): The document prepared by the Billing Committee of the Ordering and Billing Forum (OBF), which functions under the auspices of the Carrier Liaison Committee (CLC) of the Alliance for Telecommunications Industry Solutions (ATIS). The currently effective version of the MECAB document, published by ATIS (0401004-00XX), contains the recommended guidelines for the billing of an Access Service provided by two or more LECs, or by one LEC in two or more states within a single LATA. Multiple Exchange Carriers Ordering and Design Guidelines for Access Services - Industry Support Interface (MECOD): A document developed by the Ordering/Provisioning Committee under the auspices of the Ordering and Billing Forum (OBF), which functions under the auspices of the Carrier Liaison Committee (CLC) of the Alliance for Telecommunications Industry Solutions (ATIS). The currently effective version of the MECOD document, published by ATIS (0404120-00XX), establishes methods for processing orders for Access Service that is to be provided by two or more LECs. National Emergency Number Association (NENA): A not-for-profit corporation established in 1982 to further the goal of “One Nation-One Number” for emergency calls. NENA is a networking source and promotes research, planning, and training. NENA strives to educate, set standards and provide certification programs, legislative representation and technical assistance for implementing and managing 911 systems.

  • Large municipal separate storm sewer system means all municipal separate storm sewers that are either:

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • Limited access area means a building, room, or other contiguous area upon the Licensed Premises where Retail Marijuana is grown, cultivated, stored, weighed, packaged, sold, or processed for sale, under control of the Licensee.

  • Restricted access area means a designated and secure area within a Licensed Premises in a Retail Marijuana Store where Retail Marijuana and Retail Marijuana Product are sold, possessed for sale, and displayed for sale, and where no one under the age of 21 is permitted.

  • Totally enclosed treatment facility means a facility for the treatment of hazardous waste which is directly connected to an industrial production process and which is constructed and operated in a manner which prevents the release of any hazardous waste or any constituent thereof into the environment during treatment. An example is a pipe in which waste acid is neutralized.

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • business vertical means a distinguishable component of an enterprise that is engaged in the supply of individual goods or services or a group of related goods or services which is subject to risks and returns that are different from those of the other business verticals.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Non-Administrator Substance Use Disorder Treatment Facility means a Substance Use Disorder Treatment Facility that does not meet the definition of an Administrator Substance Use Disorder Treatment Facility.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Lateral Access Road Licence means a miscellaneous licence granted pursuant to subclause (6)(a)(ii) or subclause (6)(b) as the case may be and according to the requirements of the context describes the area of land from time to time the subject of that licence;

  • Local Access and Transport Area (LATA) Shall have the meaning set forth in 47 U.S.C. §153.

  • Landing Gear means the installed main and nose landing gear, components and their associated actuators, side braces and parts.

  • Lateral Access Roads has the meaning given in subclause (3)(a)(iv));

  • Municipal Separate Storm Sewer System Management Program means a management program covering the duration of a state permit for a municipal separate storm sewer system that includes a comprehensive planning process that involves public participation and intergovernmental coordination, to reduce the discharge of pollutants to the maximum extent practicable, to protect water quality, and to satisfy the appropriate water quality requirements of the CWA and regulations, and this article and its attendant regulations, using management practices, control techniques, and system, design, and engineering methods, and such other provisions that are appropriate.

  • Attachment Facilities means the facilities necessary to physically connect a Customer Facility to the Transmission System or interconnected distribution facilities.

  • Enclosure means the part enclosing the internal units and providing protection against any direct contact.

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Large Facility Interconnection Procedures or “LFIP”) shall mean the interconnection procedures applicable to an Interconnection Request pertaining to a Large Generating Facility that are included in Attachment X of the NYISO OATT. Standard Large Generator Interconnection Agreement (“LGIA”) shall mean this Agreement, the form of interconnection agreement applicable to an Interconnection Request pertaining to a Large Generating Facility, that is included in Attachment X of the NYISO OATT. System Deliverability Upgrades shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to Byways and Highways and Other Interfaces on the existing New York State Transmission System and Distribution System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard at the requested level of Capacity Resource Interconnection Service. System Protection Facilities shall mean the equipment, including necessary protection signal communications equipment, required to (1) protect the New York State Transmission System from faults or other electrical disturbances occurring at the Large Generating Facility and (2) protect the Large Generating Facility from faults or other electrical system disturbances occurring on the New York State Transmission System or on other delivery systems or other generating systems to which the New York State Transmission System is directly connected. System Upgrade Facilities shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff shall mean the NYISO Open Access Transmission Tariff (“OATT”), as filed with the Commission, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Developer is engaged in on-site test operations and commissioning of the Large Generating Facility prior to Commercial Operation.