Documented API(s) definition

Documented API(s) means the Application Programming Interface(s) documented by Apple in published Apple Documentation and which are contained in the Apple Software.
Sample 1Sample 2Sample 3
Documented API(s) means the Application Programming Interface(s) documented by Apple in published Apple Documentation and are contained in the Apple Software.
Sample 1Sample 2
Documented API(s) means the Application Programming Interface(s) documented by Apple in the Documentation defined at para. 2.14 of these Commitments and contained in the software provided to the Developer under the Apple Developer Program License Agreement as applicable under the eligibility criterion at para. 3.14(1) of these Commitments.
Sample 1

Examples of Documented API(s) in a sentence

  • Whenever capitalized in this Agreement: “Ad Support APIs” means the Documented APIs that provide the Advertising Identifier and Advertising Preference.

  • Applications that link to Documented APIs through an intermediary translation or compatibility layer or tool are prohibited.” iPhone Developer Program License.

  • Unfortunately, such informa- tion cannot be used by eager app designers without violating Apple’s iPhone Developer Program License Agreement :”3.3.1 Applications may only use Documented APIs in the manner prescribed by Apple and must not use or call any private APIs.”While the Android licenses do not impose such restrictions, it is unclear when manual exposure control or RAW image capture support will be added to the software stack.

  • Utilize other relevant Documented APIs and Apple SDKs available to iOS Apps through the Apple Developer Program.

  • Product or ServiceSensitive ApplicationsNonsensitive Applications Notes and Comments Documented APIs to facilitate integration Recommended RecommendedIntegration may not always be configurable via a graphical interface,and instead may require writing a small amount of code.Identity provisioning, governance andadministration Recommended RecommendedNecessary to synchronize and provision identity information.

  • No interpreted code may be downloaded or used in an application except for code that is interpreted and run by Apple’s Documented APIs and built-in inter- preter(s) [21]”, since JVM allows Java applications to run without calling iPhone OS native APIs. It is obviously clear that neither Java nor Python are allowed on the iPhone OS.

  • Applications may only use Documented APIs in the manner prescribed by Apple and must not use or call any private APIs.

  • The products and services provided hereunder represent one implementation of the solutions subscribed, as set forth above and as further described in Appendix 1.1. Documented APIs and associated data sources must be available to Modo for data to be integrated, or remain integrated, including 3rd party data sources.

  • Documented APIs Applications may only use Documented APIs in the manner prescribed by Apple and must not use or call any private APIs. Further, macOS Applications submitted to Apple for distribution on the App Store may use only Documented APIs included in the default installation of macOS, as bundled with Xcode and the Mac SDK, or as bundled with Swift Playgrounds; deprecated technologies (such as Java) may not be used.

Related to Documented API(s)

  • Arranger Fee Letter means that certain Arranger Fee Letter related to this Agreement, entered into by the Company and dated November 23, 2015.

  • Electrostatic application means the application to a substrate of charged atomized paint droplets that are deposited by electrostatic attraction.

  • Product Specification means a product specification for a Medical Device set out in Schedule 2;

  • Expiry Date (Data di Scadenza) means the "Expiry Date" as specified in § 1 of the Product and Underlying Data.

  • Flexographic printing means the application of words, designs, and pictures to a substrate by means of a roll printing technique in which the pattern to be applied is raised above the printing roll and the image carrier is made of rubber or other elastomeric materials.

  • Reasonable Costs means the reasonable actual costs and expenses incurred by us in carrying out any further Audit under this Contract, including, but not limited to, reasonable travel and subsistence costs;

  • Self Supply LSE means a Load Serving Entity in one or more Mitigated Capacity Zones that operates under a long-standing business model to meet more than fifty percent of its Load obligations through its own generation and that is a Public Power Entity, “Single Customer Entity,” or “Vertically Integrated Utility.” For purposes of this definition only: (i) “Vertically Integrated Utility” means a utility that owns generation, includes such generation in a non-bypassable charge in its regulated rates, earns a regulated return on its investment in such generation, and that as of the date of its request for a Self Supply Exemption, has not divested more than seventy-five percent of its generation assets owned on May 20, 1996; and (ii) “Single Customer Entity” means an LSE that serves at retail only customers that are under common control with such LSE, where such control means holding 51% or more of the voting securities or voting interests of the LSE and all its retail customers.

  • Product Specifications means those Manufacturing, performance, quality - control release, and Fill/Finish specifications for Drug Substance or Licensed Product in the Territory, which are initially as set forth in the applicable Regulatory Approval for a Licensed Product, as such specifications may be amended from time to time pursuant to the terms of this Agreement.

  • Load Shedding means the systematic reduction of system demand by temporarily decreasing load in response to transmission system or area capacity shortages, system instability, or voltage control considerations under Tariff, Part II or Part III.

  • Introduction Fee means the fee payable by the Client to the Agency for an Introduction resulting in an Engagement;

  • Batch number means a unique numeric or alphanumeric identifier assigned prior to any testing to allow for inventory tracking and traceability.

  • Protocol Number 1002-048 Protocol Title: A Randomized, Double-Blind, Placebo-Controlled, Parallel Group, Multicenter Study to Evaluate the Efficacy and Safety of Bempedoic Acid (ETC-1002) 180 mg/day as Add-on to Ezetimibe Therapy in Patients with Elevated LDL-C Protocol Date: 18 January 2017 Sponsor: Esperion Therapeutics, Inc. Country where Institution is Conducting Study Czech Republic Location where the study will be conducted: Kardiologická ambulance, which is a division/part of the Institution Key Enrollment Date: 100 Calendar Days after Site Initiation Visit (being the date by which Site must enrol at least one (1) subject as more specifically set out in section 1.7 “Key Enrollment Date” below) ECMT / EC / RA ECMT: Ethics Committee Fakultni nemocnice v Motole V Uvalu 84 150 06 Xxxxx 0 Xxxxx Xxxxxxxx; Mgr. xxxxxxxxxxxxx Etická komise Nemocnice Havlíčkův Brod Husova 2624 580 22 Havlíčkův Brod RA: State Institute for Drug Control, Xxxxxxxxx 00, 000 00 Xxxxx 00 Xxxxx Xxxxxxxx Investigator name, (the “Investigator”) xxxxxxxxxxxxx Číslo Protokolu: 1002-048 Název Protokolu: Randomizované, dvojitě zaslepené, placebem kontrolované multicentrické klinické hodnocení, s paralelními skupinami, posuzující účinnost a bezpečnost kyseliny bempedové (ETC 1002) 180 mg denně jako doplňku k léčbě ezetimibem u pacientů se zvýšenou hladinou LDL-C Datum Protokolu: 18. 1. 2017 Zadavatel: Esperion Therapeutics, Inc. Stát, ve kterém má sídlo Zdravotnické zařízení, které provádí Studii Česká republika Místo, kde bude prováděna Studie: Kardiologická ambulance, která je součástí/oddělením Zdravotnického zařízení Klíčové datum zařazení: 100 kalendářních dnů po Iniciační návštěvě Místa provádění klinického hodnocení (a to jakožto den, ke kterému je Místo provádění klinického hodnocení povinno zařadit minimálně jeden (1) subjekt, jak je dále podrobněji rozvedeno níže v odstavci 1.7 “Klíčové datum zařazení”) MEK / EK / SÚKL MEK: Etická komise Fakultní nemocnice v Motole V Úvalu 84 150 06 Xxxxx 0 Xxxxx xxxxxxxxx; xxxxxxxxxxxxx Etická komise Nemocnice Havlíčkův Brod Husova 2624 580 22 Havlíčkův Brod SÚKL: Státní ústav pro kontrolu léčiv, Šrobárova 48, 100 41 Xxxxx 00 Xxxxx xxxxxxxxx Jméno zkoušejícího, ( “Zkoušející”) xxxxxxxxxxxxx The following additional definitions shall apply to this Agreement: Ve Smlouvě jsou použity následující smluvní definice:

  • Pyrophoric material means any liquid that ignites spontaneously in dry or moist air at or below 130° F (54.4° C) or solid, other than one classed as an explosive, which under normal conditions is liable to cause fires through friction, retained heat from manufacturing or processing, or which can be ignited readily and, when ignited, burns so vigorously and persistently as to create a serious transportation, handling, or disposal hazard. Included are spontaneously combustible and water-reactive materials.

  • Program Costs means all necessary and incidental costs of providing program services.

  • Disbursement Schedule means the disbursement schedule as set out in an FAA;

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Manufacturing Facility means buildings and structures, including machinery and equipment, the primary purpose of which is or will be the manufacture of tangible goods or materials or the processing of such goods or materials by physical or chemical change.

  • Manufacturing Services means the manufacturing, quality control, quality assurance, stability testing, packaging, and related services, as set forth in this Agreement, required to manufacture Product or Products using the Active Materials, Components, and Xxxx Back Items;

  • Packaging Materials means art and mechanical formats for a Software Title including the retail packaging, end user instruction manual with end user license agreement and warranties, end user warnings, FPU media label, and any promotional inserts and other materials that are to be included in the retail packaging.

  • Manufacturing Agreement has the meaning set forth in Section 4.3.

  • Agent's Fee Letter means the letter agreement, dated as of the date hereof (as hereafter amended from time to time) between the Borrower and the Agent respecting certain fees payable to the Agent for its own account.

  • Contract Player means any Player (other than a Player on a Scholarship) who is eligible to play under a written contract of employment with a Club.

  • Manufacturing Process means any process for—

  • Manufacturing Materials means parts, tools, dies, jigs, fixtures, plans, drawings, and information produced or acquired, or rights acquired, specifically to fulfill obligations set forth herein.

  • District specification means the specifications followed by the State Govt. in the area where the work is to be executed.

  • Direct Costs means the sum of the following: