Clearance Air Monitoring definition

Clearance Air Monitoring means the employment of aggressive sampling techniques, with a volume of air collected to determine the airborne concentration of residual fibers upon conclusion of an asbestos abatement project.
Sample 1Sample 2Sample 3
Clearance Air Monitoring means the monitoring of air conducted inside the work area after cleanup of an asbestos abatement project has been completed.
Sample 1Sample 2Sample 3
Clearance Air Monitoring means to collect samples using an aggressive air sampling method and to analyze samples to determine whether an asbestos work area meets a clearance standard for airborne asbestos fiber.
Sample 1Sample 2Sample 3

Examples of Clearance Air Monitoring in a sentence

  • If initial Post-Abatement (Clearance Air) Monitoring results do not comply with the standards referenced in Part 1 of this Section the Contractor shall either re-clean or order a full set of TEM analysis.

  • Clearance Air Monitoring: Air monitoring conducted by an Asbestos Project Monitor at the conclusion of an asbestos project.

  • Final Visual Inspection and Final Air Clearance Under the observation of a certified Air Monitoring Specialist, anyone attempting to obtain the necessary experience to fulfill the Air Monitoring Specialist requirements may participate in final visual inspections and Final Clearance Air Monitoring along with the certified Air Monitoring Specialist.

  • STEP 2: VACATE WORK AREA The work area should be vacated by the building occupants prior to work area preparation activities and until satisfactory Clearance Air Monitoring results have been achieved.

  • Final Clearance Air Monitoring – At the conclusion of the final visual inspection and after an adequate drying time has elapsed for the encapsulant, the GRE AMS will conduct final clearance air monitoring.

  • Clearance Air Monitoring: shall mean the employment of aggressive sampling techniques with a volume of air collected to determine the airborne concentration of residual fibers and shall be performed as the final abatement activity.

  • Clearance Air Monitoring: Refer to Work Area Clearance section of this specification.

  • Clearance Air Monitoring: Air clearance samples will be collected by the IH Consultant.

  • Final Visual Inspection and Final Air Clearance Under the direct observation of a certified Air Monitoring Specialist, anyone attempting to obtain the necessary experience to fulfill the Air Monitoring Specialist requirements may participate in final visual inspections and Final Clearance Air Monitoring on Division permitted asbestos abatement projects along with the certified Air Monitoring Specialist.

  • Final Clearance Air Monitoring – At the conclusion of the final visual inspection, the AMS will conduct final clearance air monitoring.


More Definitions of Clearance Air Monitoring

Clearance Air Monitoring means employment of aggressive sampling methods with volume of air collected to determine airborne concentration of fibers upon conclusion of asbestos abatement project.
Sample 1

Related to Clearance Air Monitoring

  • Monitoring means the measurement of radiation, radioactive material concentrations, surface area activities or quantities of radioactive material and the use of the results of these measurements to evaluate potential exposures and doses. For purposes of these regulations, "radiation monitoring" and "radiation protection monitoring" are equivalent terms.

  • Wastewater Treatment Works means an arrangement of devices and structures for treating wastewater, industrial wastes, and sludge. Sometimes used as synonymous with "waste treatment plant" or "wastewater treatment plant" or "pollution control plant".

  • Clearance System means the principal domestic clearance system customarily used for settling trades with respect to the Underlying as determined by the Calculation Agent acting in accordance with relevant market practice and in good faith.

  • Clearance means national security clearance and employment checks undertaken by and/or obtained from the Defence Vetting Agency;

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Stormwater management planning agency means a public body authorized by legislation to prepare stormwater management plans.

  • Procurement means the purchasing, buying, renting, leasing, or otherwise obtaining of any supplies, services, or construction. It includes all functions that pertain to the procurement of any supply, service, or construction item, including description of requirements, selection and solicitation of sources, preparation and award of contract, and all phases of contract administration;

  • Quality Management System means a set of interrelated or interacting elements that organisations use to direct and control how quality policies are implemented and quality objectives are achieved;

  • Wastewater treatment tank means a tank that is designed to receive and treat an influent wastewater through physical, chemical, or biological methods.