Shortage of Supplied Product Sample Clauses

Shortage of Supplied Product. In the event that Seller fails to supply, or expects that it will not be able to supply, to Buyer any amounts of Supplied Product ordered by Buyer under a Firm Order by the specified delivery date in such Firm Order, due to a shortage of raw materials, resources or existing capacity, or for any other reason (including due to a Force Majeure) (a “Supply Shortage”), then Seller shall notify Buyer in writing of such circumstances as soon as reasonably practicable, including the underlying reasons for such shortage, proposed remedial measures and, to the extent it can be reasonably determined, the date such inability to supply Supplied Product is expected to end. As to any such Supply Shortage, or expected Supply Shortage, Seller shall use good faith, diligent efforts to resolve such problem and deliver the shortfall of ordered Products as soon as reasonably practicable. Further, in such event, the Parties shall negotiate in good faith and seek to agree on a reasonable delivery schedule (in light of the circumstances) for such Supplied Product, provided that any such negotiation or agreement shall not relieve Seller of its supply obligations hereunder.
Sample 1
AutoNDA by SimpleDocs

Related to Shortage of Supplied Product

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Product Recalls The Company is not aware of any pattern or series of claims against the Company or any of its subsidiaries which reasonably could be expected to result in a generalized product recall relating to products sold by the Company or any of its subsidiaries, regardless of whether such product recall is formal, informal, voluntary or involuntary.

  • Recycled Products The Provider shall procure any recycled products or materials, which are the subject of or are required to carry out this Contract, in accordance with the provisions of sections 403.7065, F.S.

  • Product Supply The Parties shall reasonably cooperate and assist each other in transferring ownership of Product drug product and/or Product drug substance (such material, CERTAIN CONFIDENTIAL PORTIONS OF THIS EXHIBIT WERE OMITTED AND REPLACED WITH “[***]”. A COMPLETE VERSION OF THIS EXHIBIT HAS BEEN FILED SEPARATELY WITH THE SECRETARY OF THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO AN APPLICATION REQUESTING CONFIDENTIAL TREATMENT PURSUANT TO RULE 406 PROMULGATED UNDER THE SECURITIES ACT OF 1933, AS AMENDED. collectively, the “Product Lots”) set forth in Exhibit A attached hereto as promptly as reasonably practicable following the Effective Date; provided, however, that neither Party shall be required to pay money to any Third Party, commence any litigation with, or offer or grant any accommodation (financial or otherwise) to any Third Party. Such Product Lots shall be delivered EXW (Ex Works) (Incoterms 2010) AMGEN, Thousand Oaks, California. Any expense for shipment shall be borne by AKERO (including any import or export duties or taxes). Subject to the terms of this Section 5.4 and Section 6.2 (Additional AMGEN Warranties), AMGEN transfers the Product Lots to AKERO “as is”, and makes no other representation to AKERO in connection therewith. The Parties have entered into a Quality Agreement substantially in the form attached hereto as Exhibit F, dated as of the date hereof, governing the quality of the Product Lots to be supplied pursuant to this Section 5.4. For the avoidance of doubt, Product Lots consisting of drug product as set forth in Exhibit A supplied pursuant to this Section 5.4 shall be labeled for their intended clinical use as set forth in Exhibit A and the labeling of any Product drug product manufactured after the Effective Date shall be the responsibility of AKERO. Except for the Licensed Materials and such Product Lots to be transferred to AKERO, AKERO shall be responsible for, and shall bear the cost of, obtaining (whether by manufacturing or causing to be manufactured) research, clinical and commercial supplies of the Product. From and after the Effective Date, AKERO shall be responsible for all costs and expenses in connection with the storage of, and any stability studies performed on, the Product Lots.

  • Supply of Product 3.1 In accordance with the terms of this Agreement, GENSIA SICOR (through SICOR) shall supply all of PURCHASER'S ordered requirements for Product in bulk form for use by PURCHASER in the Territories in accordance with the provisions of this Agreement. The right and license of PURCHASER to obtain, use and distribute Product (including, without limitation, the right to make or have made Product) from GENSIA SICOR and SICOR shall be (i) non-exclusive in the Non-exclusive Territory, and (ii exclusive in the Exclusive Territory; provided, however, that the rights and licenses set forth in clause (ii) above shall be co-exclusive in each jurisdiction in which GENSIA SICOR (or ALCO or SICOR, as the case may be) has binding written agreements, or binding written commitments that will lead to binding written agreements, to sell Product on the Restatement Date (which is limited to only those [ * ] and the [ * ] with whom GENSIA SICOR has commitments that are in existence on the Restatement Date), but only with respect to such third parties and only until the earlier of expiration or termination of such agreements; and provided, further that GENSIA SICOR shall use all diligent efforts (without any obligation to violate or alter the terms of such agreements existing on the Restatement Date) to provide PURCHASER with exclusive rights and licenses to sell the Products in the Territory as soon as possible. All Product hereunder shall be manufactured at SICOR's GMP facilities at Rho, Italy, the facility identified in Exhibit 9 hereto, the Santxx Xxxility and additional (as necessary and as provided in Section 6 below) GMP qualified facilities that are approved in advance by PURCHASER (which approval will not be unreasonably withheld). In addition, all Product shall be manufactured (A) in accordance with drug substance manufacturing and quality control procedures existing on the Effective Date, which drug substance manufacturing and quality control procedures have been included in manufacturer's Abbreviated Antibiotic Drug Application ("AADA") submitted to the FDA in 1996, and that will be submitted to other Regulatory Authorities in the Territory (which AADA shall include at least the elements set forth in the Drug Master File) in accordance with U.S. FDA current Good Manufacturing Practices, and (B) to the Q/C Specifications. GENSIA SICOR shall cause SICOR to use its diligent efforts to [ * ] in order to produce and supply all Product ordered by Purchaser hereunder and to meet the Product [ * ] that will be set forth in Schedule 1 hereto within [ * ] after the Restatement Date. In addition, GENSIA SICOR agrees to the following (and GENSIA SICOR agrees to cause SICOR to undertake):

  • Licensed Product “Licensed Product” shall mean any article, composition, apparatus, substance, chemical material, method, process or service whose manufacture, use, or sale is covered or claimed by a Valid Claim within the Patent Rights. For clarity, a “Licensed Product” shall not include other product or material that (a) is used in combination with Licensed Product, and (b) does not constitute an article, composition, apparatus, substance, chemical material, method, process or service whose manufacture, use, or sale is covered or claimed by a Valid Claim within the Patent Rights.

  • Product Recall (a) If a recall is required by applicable Law, or if Buyer or Supplier reasonably determines that a recall is advisable because the goods may create a potential safety hazard, are not in compliance with any applicable code, standard or legal requirement, or contain a defect or non-conformance with the requirements of this Order occurring or likely to occur in multiple goods, which such defects or non-conformances are substantially similar or have substantially similar causes or effects (collectively a “Serial Defect”), the parties shall promptly communicate such facts to each other. At Buyer’s request, Supplier shall promptly develop a corrective action plan satisfactory to Buyer, which shall include all actions required to recall and/or repair the goods and any actions required by applicable Law (“Corrective Action Plan”) for Buyer’s review and approval. At Buyer’s election, Xxxxx may develop the Corrective Action Plan. In no event shall Buyer and Supplier’s failure to agree on the Corrective Action Plan delay the timely notification of a potential safety hazard, non-compliance or Serial Defect to users of the goods, cause either party to be non-compliant with applicable Law or prevent Buyer from taking reasonable actions to prevent injury or damage to persons, equipment or other property. Supplier and Buyer shall cooperate with and assist each other in any corrective actions and/or filings, if applicable.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.

  • Packaging Materials and Containers for Retail Sale Packaging materials and containers in which a good is packaged for retail sale shall, if classified with the good, be disregarded in determining whether all the non-originating materials used in the production of the good undergo the applicable change in tariff classification set out in Annex 4, and, if the good is subject to a regional value-content requirement, the value of such packaging materials and containers shall be taken into account as originating or non-originating materials, as the case may be, in calculating the regional value content of the good.

Time is Money Join Law Insider Premium to draft better contracts faster.