National Register and National Historic Landmark Nominations Sample Clauses

National Register and National Historic Landmark Nominations. FEMA, the Recipient(s), and subrecipient shall work with SHPO, and/or participating Tribe(s), and other consulting parties, as appropriate, to identify the individual properties that would benefit from a completed National Register of Historic Places (NRHP) or National Historic Landmark (NHL) nomination form. Once the parties have agreed to a property, the responsible entity will continue to coordinate with FEMA, Recipient(s), subrecipient, SHPO, and/or participating Tribe(s), and other consulting parties, as appropriate, through the drafting of the NRHP nomination form or will contact the NHL Program to begin the nomination process. The SHPO and/or participating Tribe(s) will provide adequate guidance to the responsible entity during the preparation of the nomination form. The proposed treatment measure may include provisions that describe the submission of the completed NRHP nomination to the State Review Board and the Keeper for inclusion in the NRHP.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
National Register and National Historic Landmark Nominations. Prior to project implementation, FEMA, the Grantee(s), and subgrantee shall work with the SHPO/OAS to identify the individual properties that would benefit from a completed National Register or National Historic Landmark nomination form. Once the parties have agreed to a property, the designated responsible party shall continue to coordinate with the SHPO/OAS through the drafting of the nomination form. The SHPO/OAS shall provide adequate guidance to the designated responsible party during the preparation of the nomination form and shall formally submit the final nomination to the Keeper for inclusion in the National Register. The designated responsible party shall use staff or contractors that meet the Secretary’s Professional Qualifications for the appropriate discipline.
Sample 1Sample 2
National Register and National Historic Landmark Nominations. A. Prior to project implementation, NJDEP will work with the PA Signatories to identify the individual properties that would benefit from a completed National Register or National Historic Landmark nomination form. Once the PA Signatories have agreed to a property, the project may move to the construction phase and the NJDEP shall continue to coordinate with the PA Signatories as the CRM drafts the nomination form. The PA Signatories will provide adequate guidance to the NJDEP during the preparation of the nomination form. The NJHPO shall formally submit the final nomination to the Keeper for inclusion in the National Register. .
Sample 1
National Register and National Historic Landmark Nominations. Prior to project implementation, the City shall consult with the SHPO and any participating Tribes to identify the individual properties that would benefit from a completed NRHP or National Historic Landmark nomination form. Once the parties have agreed to a property, the City shall continue to coordinate with the SHPO through the drafting of the nomination form. The SHPO will provide adequate guidance to the City during the preparation of the nomination form and shall formally submit the final nomination to the Keeper for inclusion in the NRHP. The City shall use the Preservation Specialist or contractors that meet the Qualification Standards.
Sample 1
National Register and National Historic Landmark Nominations. USACE, and/or the NFS shall consult with the MS SHPO, appropriate Federally-recognized Tribe(s), and other consulting parties, as appropriate , to identify the individual properties that would benefit from a completed National Register of Historic Places (NRHP) or National Historic Landmark (NHL) nomination form. Once the parties have agreed to a property, the responsible entity will continue to coordinate with USACE, the MS XXXX, appropriate Federally-recognized Tribe(s), and other consulting parties, as appropriate, through the drafting of the NRHP nomination form or will contact the NHL Program to begin the nomination process. The MS SHPO and/or Federally- recognized Tribe(s) will provide adequate guidance to the responsible entity during the preparation of the nomination form. The responsible entity will work with the MS SHPO to ensure the completed NRHP form is presented to the particular state’s National Register Review Committee in a timely manner for consideration by the State Historic Preservation Officer and the Keeper of the Register.
Sample 1
National Register and National Historic Landmark Nominations. Prior to project implementation, FEMA, the Recipient(s), and Subrecipient shall work with the SHPO and/or participating Tribes to identify the individual properties that would benefit from a completed National Register or National Historic Landmark nomination form. Once the parties have agreed to a property, the designated responsible party shall continue to coordinate with the SHPO and/or participating Tribes through the drafting of the nomination form. The SHPO and/or participating Tribe(s) shall provide adequate guidance to the designated responsible party during the preparation of the nomination form, and shall formally submit the final nomination to the Keeper for inclusion in the National Register. The designated responsible party shall use staff or contractors that meet the Professional Qualifications for the appropriate discipline.
Sample 1

Related to National Register and National Historic Landmark Nominations

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • File Naming Conventions Files will be named according to the following convention: {gTLD}_{YYYY-­‐MM-­‐DD}_{type}_S{#}_R{rev}.{ext} where:

  • 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • CERTIFICATION REGARDING BOYCOTTING CERTAIN ENERGY COMPANIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has ten (10) or more full-time employees; and (c) this contract has a value of $100,000 or more that is to be paid wholly or partly from public funds, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 13 (87th session), the company hereby certifies and verifies that the company, or any wholly owned subsidiary, majority-owned subsidiary, parent company, or affiliate of these entities or business associations, if any, does not boycott energy companies and will not boycott energy companies during the term of the contract. For purposes of this contract, the term “company” shall mean an organization, association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, that exists to make a profit. The term “boycott energy company” shall mean “without an ordinary business purpose, refusing to deal with, terminating business activities with, or otherwise taking any action intended to penalize, inflict economic harm on, or limit commercial relations with a company because the company (a) engages in the exploration, production, utilization, transportation, sale, or manufacturing of fossil fuel-based energy and does not commit or pledge to meet environmental standards beyond applicable federal and state law, or (b) does business with a company described by paragraph (a).” See Tex. Gov’t Code § 809.001(1).

  • Department of State Registration Consistent with Title XXXVI, F.S., the Contractor and any subcontractors that assert status, other than a sole proprietor, must provide the Department with conclusive evidence of a certificate of status, not subject to qualification, if a Florida business entity, or of a certificate of authorization if a foreign business entity.

  • Annual Registered Public Accounting Firm Attestation (a) On or before March 30th of each year, beginning March 30, 2022, the Servicer shall cause a registered public accounting firm, which may also render other services to the Servicer or to its Affiliates, to furnish to the Issuer, with a copy to the Indenture Trustee, each attestation report on assessments of compliance with the Servicing Criteria with respect to the Servicer or any Affiliate thereof during the related fiscal year delivered by such accountants pursuant to paragraph (c) of Rule 13a-18 or Rule 15d-18 of the Exchange Act and Item 1122 of Regulation AB. The certification required by this paragraph may be replaced by any similar certification using other procedures or attestation standards which are now or in the future in use by servicers of comparable assets, or which otherwise comply with any rule, regulation, “no action” letter or similar guidance promulgated by the Commission.

  • SECTION 109 OF THE HOUSING AND COMMUNITY DEVELOPMENT ACT OF 1974 The Contractor shall comply with the provisions of Section 109 of the Housing and Community Development Act of 1974. No person in the United States shall on the grounds of race, color, national origin, or sex be excluded from participation in, be denied the benefits of, or be subjected to discrimination under any program or activity funded in whole or in part with funds made available under this title. Section 109 further provides that discrimination on the basis of age under the Age Discrimination Act of 1975 or with respect to an otherwise qualified handicapped individual as provided in Section 504 of the Rehabilitation Act of 1973, as amended, is prohibited.

  • CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Secondary / Post-Secondary Program Alignment Welding HIGH SCHOOL COURSE SEQUENCE 9th Grade 10th Grade 11th Grade 12th Grade English 9 Algebra I World History/Geography Biology World Language Phys Ed/Health English 10 Geometry U.S. History/Geography Physics or Chemistry World Language Visual/Performing/Applied Arts English 11 Algebra II Civics/Economics Welding English 12 Math Credit Science Credit Welding WASHTENAW COMMUNITY COLLEGE Welding Associate in Applied Science Semester 1 Math Elective(s)* 3 WAF 105 Introduction to Welding Processes 2 WAF 111 Oxy-fuel Welding 4 WAF 112 Shielded Metal Arc Welding 4 Semester Total 13 Semester 2 Speech Elective(s) 3 WAF 106 Blueprint Reading for Welders 3 WAF 123 Advanced Oxy-fuel Welding 4 WAF 124 Advanced Shielded Metal Arc Welding 4 Semester Total 14 Semester 3 Arts/Human. Elective(s) 3 Computer Lit. Elective(s) 3 WAF 215 Advanced Gas Tungsten Arc Welding 4 WAF 288 Gas Metal Arc Welding 4 Semester Total 14 Semester 4 WAF 200 Layout Theory Welding 3 WAF 210 Welding Metallurgy 3 Soc. Sci. Elective(s) 3 WAF 226 Specialized Welding Procedures 4 Semester Total 13 Semester 5 Nat. Sci. Elective(s) 4 WAF 227 Basic Fabrication 3 WAF 229 Shape Cutting Operations 3 Writing Elective(s) 3 Semester Total 13 Program Totals 67

  • International Olympic Committee; International Red Cross and Red Crescent Movement As instructed from time to time by ICANN, the names (including their IDN variants, where applicable) relating to the International Olympic Committee, International Red Cross and Red Crescent Movement listed at xxxx://xxx.xxxxx.xxx/en/resources/registries/reserved shall be withheld from registration or allocated to Registry Operator at the second level within the TLD. Additional International Olympic Committee, International Red Cross and Red Crescent Movement names (including their IDN variants) may be added to the list upon ten (10) calendar days notice from ICANN to Registry Operator. Such names may not be activated in the DNS, and may not be released for registration to any person or entity other than Registry Operator. Upon conclusion of Registry Operator’s designation as operator of the registry for the TLD, all such names withheld from registration or allocated to Registry Operator shall be transferred as specified by ICANN. Registry Operator may self-­‐allocate and renew such names without use of an ICANN accredited registrar, which will not be considered Transactions for purposes of Section 6.1 of the Agreement.

Time is Money Join Law Insider Premium to draft better contracts faster.