Modifications of structure and interior/exterior layout/Samples Sample Clauses

Modifications of structure and interior/exterior layout/Samples. These are any structural and interior layout modifications whose objective is to resolve a technical problem and/or to complete or finalize either the architectural effect or the harmony of the Building that would be made by the LESSOR in agreement with and on the initiative of the principal contractor for the execution of the work. These modifications, however, can only be made after the LESSOR has obtained the consent of the LESSEE and the Buyer on the conditions. To do this, the LESSOR will send to the LESSEE and the Buyer the complete file of the modifications desired. This file must indicate the reasons for the modifications requested. When there is no response from the LESSEE within ten (10) Business Days of receipt of the proposal for modifications made by the LESSOR, the LESSEE will be deemed to have accepted the said proposal. If, during the above-mentioned time of ten (10) Business Days, a meeting of the Tracking Committee takes place, a decision concerning the requests for desired modifications must be made during the said meeting. The LESSOR shall be personally liable for the authorization of the Buyer by providing the LESSEE with a written agreement from the Buyer; the LESSEE does not have to directly ask the Buyer for its authorization. In addition, the LESSOR will provide the LESSEE with samples of materials as well as decorative finishings, such as finishings for facades, bathrooms, living rooms, elevator landings and shafts and others. In all cases, the technical submissions must be made early enough to ensure that other samples are obtained and presented if the preceding samples are deemed unacceptable. The LESSOR shall send the samples to the LESSEE thirty (30) days before the planned use of the materials and/or performance of the finishing work. If the LESSEE fails to respond within ten (10) calendar days after receipt of the samples, the LESSEE shall be deemed to have accepted the sample or samples proposed. It is the LESSOR's responsibility to obtain the Buyer's authorizations and provide the LESSEE with the written agreement of the Buyer; the LESSEE shall not have to directly contact the Buyer for its authorization. All samples must be kept in the model offices until delivery of the Building.
AutoNDA by SimpleDocs

Related to Modifications of structure and interior/exterior layout/Samples

  • Alterations and Amendments This Agreement, applicable fees and service charges may be altered or amended from time-to-time. In such event, we will provide notice to you. Any use of the Service after we provide you a notice of change will constitute your agreement to such change(s). Further, we may, from time to time, revise or update the applications, services, and/or related material, which may render all such prior versions obsolete. Consequently, we reserve the right to terminate this Agreement as to all such prior versions of the applications, services, and/or related material and limit access to only the Service's more recent revisions and updates.

  • Alterations, Modifications and Additions The Owner shall, or shall cause a Permitted Lessee to, make (or cause to be made) alterations and modifications in and additions to the Aircraft, Airframe and each Engine as may be required to be made from time to time to meet the applicable standards of the FAA or other Aviation Authority having jurisdiction over the operation of the Aircraft, to the extent made mandatory in respect of the Aircraft (a “Mandatory Modification”); except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Owner or a Permitted Lessee and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by the Owner or any Permitted Lessee in any reasonable manner which does not materially adversely affect the Indenture Trustee’s interest in the Aircraft, does not impair the Indenture Trustee’s security interest or International Interest in the Aircraft and does not involve any material risk of sale, forfeiture or loss of the Aircraft or the interest of the Indenture Trustee therein or any material risk of material civil penalty or any material risk of criminal liability being imposed on the Indenture Trustee or the holder of any Equipment Note. In addition, the Owner, at its own expense, may, or may permit a Permitted Lessee at its own cost and expense to, from time to time make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine (each an “Optional Modification”) as the Owner or such Permitted Lessee may deem desirable in the proper conduct of its business including, without limitation, removal of Parts which the Owner deems are obsolete or no longer suitable or appropriate for use in the Aircraft, Airframe or such Engine; provided, however, that no such Optional Modification shall (i) materially diminish the fair market value, utility, or useful life of the Aircraft or any Engine below its fair market value, utility or useful life immediately prior to such Optional Modification (assuming the Aircraft or such Engine was in the condition required by this Trust Indenture immediately prior to such Optional Modification) or (ii) cause the Aircraft to cease to have the applicable standard certificate of airworthiness except that such certificate of airworthiness temporarily may be replaced by an experimental certificate during the process of implementing and testing such Optional Modification and securing related FAA re-certification of the Aircraft. For the avoidance of doubt, Owner may make alterations in the passenger configuration of the Aircraft and such alterations shall not constitute an Optional Modification. All Parts incorporated or installed in or attached to any Airframe or any Engine as the result of any alteration, modification or addition effected by the Owner shall be free and clear of any Liens except Permitted Liens and become subject to the Lien of this Trust Indenture; provided that the Owner or any Permitted Lessee may, at any time so long as the Airframe or any Engine is subject to the Lien of this Trust Indenture, remove any such Part (such Part being referred to herein as a “Removable Part”) from such Airframe or an Engine if (i) such Part is in addition to, and not in replacement of or in substitution for, any Part originally incorporated or installed in or attached to such Airframe or any Engine at the time of delivery thereof hereunder or any Part in replacement of, or in substitution for, any such original Part, (ii) such Part is not required to be incorporated or installed in or attached or added to such Airframe or any Engine pursuant to the terms of Section 4.02(d) or the first sentence of this Section 4.04(d) and (iii) such Part can be removed from such Airframe or any Engine without materially diminishing the fair market value, utility or remaining useful life which such Airframe or any Engine would have had at the time of removal had such removal not been effected by the Owner, assuming the Aircraft was otherwise maintained in the condition required by this Trust Indenture and such Removable Part had not been incorporated or installed in or attached to the Aircraft, Airframe or such Engine. Upon the removal by the Owner of any such Part as above provided in this Section 4.04(d), title thereto shall, without further act, be free and clear of all rights of the Indenture Trustee and such Part shall no longer be deemed a Part hereunder. Removable Parts may be leased from or financed by third parties other than the Indenture Trustee. Notwithstanding any other provision of this Indenture, Owner may, at any time, install or permit to be installed in the Aircraft Passenger Convenience Equipment owned by Owner or any Permitted Lessee or by third parties and leased or otherwise furnished to Owner in the ordinary course of business (including pursuant to a conditional sale contract, a licence or otherwise), and Owner may remove (and not replace) or permit to be removed (and not replaced) the same, and Indenture Trustee shall not acquire a Lien thereon by virtue of such installation or otherwise, and the rights of the owners therein shall not constitute a default under this Trust Indenture, it being acknowledged and agreed, however, that in no event shall the installation of any such Passenger Convenience Equipment impair or otherwise affect the rights and remedies of the Indenture Trustee hereunder and under applicable law.

  • Amendments and Alterations You agree that the terms and conditions governing your account may be amended by us from time to time. We will notify you of amendments as required by applicable law. Your continued use of the account evidences your agreement to any amendments. Notices will be sent to the most recent address shown on the account records. Only one notice will be given in the case of joint account holders.

  • Additions and Alterations 12 ARTICLE 9

  • Disbursements for Site Improvements All payments made by the OPWC for site improvements or other work shall be made directly to the Contractor that performed the work and originated the invoice, unless the request is for disbursement to the Recipient.

  • Alterations and Attachments Student and Parent may not make any alterations in or add attachments, hardware, or software to the mobile device computer absent express permission from M-DCPS, which permission is at the sole option of M-DCPS.

  • SCOPE, WAIVER AND ALTERATION OF AGREEMENT (1) No agreement, alteration, understanding, variation, waiver or modification of any of the terms and conditions or covenants herein shall be made by any employee or group of employees with the Board unless executed in writing between the parties hereto and the same has been ratified by the Union and the Board.

  • ALTERATIONS & IMPROVEMENTS Tenant shall not make any alterations, additions or improvements or do any type of construction to the Property without first obtaining Landlord's written consent. Unless prior written agreement is reached between Tenant and Landlord, any such alterations, additions, improvements or construction shall become part of the Property and shall remain at the expiration of Tenant's Lease term. If Landlord approves of alterations, additions, improvements or construction in writing and Tenant intends to use contractors to undertake such work, the contractors must first be approved in writing by Landlord. Tenant must also place any funds to cover the amount of any alterations, additions, improvements or construction in an escrow account approved by Landlord before the commencement of the work. Landlord shall designate the times and manner of the work being done, exclusively.

  • Specific Agreements 1. Investments made pursuant to a specific agreement concluded between one Contracting Party and investors of the other Party shall be covered by the provisions of this Agreement and by those of the specific agreement.

  • CHANGE ORDERS AND AMENDMENTS A. Any alterations, additions, or deletions to the terms of this Agreement, which are required by changes in federal or state law or by regulations, are automatically incorporated without written amendment hereto, and shall become effective on the date designated by such law or by regulation.

Time is Money Join Law Insider Premium to draft better contracts faster.