Heavy Duty Repairmen shall furnish their own hand tools Sample Clauses

Heavy Duty Repairmen shall furnish their own hand tools but special tools shall be furnished by the Individual Employer as needed, such as: pin presses, spanner wrenches, air or electric wrenches, testing and measuring devices other than a hand rule, gear and bearing pullers, electric drills, reamers, taps and dies, oxy- acetylene hoses, gauges, torches and tips, torque wrenches, twenty-four-inch (24") pipe wrenches or socket wrenches, and sockets requiring over three-quarter-inch (3/4") drive, box-end wrenches over 1" and open-end wrenches over 1". Heavy Duty Repairmen and/or the Registered Apprentices shall be entitled to a tool pick-up time before the end of each shift, which shall not be less than five (5) minutes or more than fifteen (15) minutes.
AutoNDA by SimpleDocs

Related to Heavy Duty Repairmen shall furnish their own hand tools

  • Subcontractors The Contractor will not subcontract any work under the Contract without prior written consent of the Department. The Contractor is fully responsible for satisfactory completion of all its subcontracted work. The Department supports diversity in its procurements and contracts, and requests that the Contractor offer subcontracting opportunities to certified woman-, veteran-, and minority-owned small businesses. The Contractor may contact the OSD at xxxxxxx@xxx.xxxxxxxxx.xxx for information on certified small business enterprises available for subcontracting opportunities.

  • Subcontractor Any vendor, subcontractor or other Person that is not responsible for the overall servicing (as “servicing” is commonly understood by participants in the mortgage-backed securities market) of Mortgage Loans but performs one or more discrete functions identified in Item 1122(d) of Regulation AB with respect to Mortgage Loans under the direction or authority of the Servicer or a Subservicer.

  • Contractors All LAUSD Contractors and their Representatives are expected to conduct any and all business affiliated with LAUSD in an ethical and responsible manner that fosters integrity and public confidence. A “Contractor” is any individual, organization, corporation, sole proprietorship, partnership, nonprofit, joint venture, association, or any combination thereof that is pursuing or conducting business with and/or on behalf of LAUSD, including, without limitation, consultants, suppliers, manufacturers, and any other vendors, bidders or proposers. A Contractor’s “Representative” is also broadly defined to include any subcontractors, employees, agents, or anyone else who acts on a Contractor’s behalf.

  • CONTRACTOR CUSTOMER SERVICE REPRESENTATIVE Contractor shall designate a customer service representative (and inform Enterprise Services of the same) who shall be responsible for addressing Purchaser issues pertaining to this Master Contract.

  • Contractor If COUNTY elects to renegotiate this Agreement due to reduced or terminated 20 funding, CONTRACTOR shall not be obligated to accept the renegotiated terms.

  • Supplier A manufacturer, fabricator, distributor, supplier, or vendor of goods or equipment in connection with the Work, or any other party having a Contract or Purchase Order with the Contractor or with a Subcontractor to furnish materials or equipment to be incorporated in the Work by the Contractor or a Subcontractor.

  • Vendors (a) Section 4.28(a) of the Company Disclosure Letter sets forth, as of the date of this Agreement, the top 10 vendors, suppliers and service providers based on the aggregate Dollar value of the Company and its Subsidiaries’ transaction volume with such counterparty during the trailing twelve (12) months for the period ending December 31, 2022 (the “Top Vendors”).

  • Escorting Visitors Visitors to areas where PHI COUNTY discloses to 4 CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY is 5 contained shall be escorted and such PHI shall be kept out of sight while visitors are in the area.

  • Supplier Personnel The Customer and Supplier agree and acknowledge that in the event of the Supplier ceasing to provide the Services or part of them for any reason, Call Off Schedule 10 (Staff Transfer) shall apply. The Supplier shall not and shall procure that any relevant Sub-Contractor shall not take any step (expressly or implicitly and directly or indirectly by itself or through any other person) without the prior written consent of the Customer to dissuade or discourage any employees engaged in the provision of the Services from transferring their employment to the Customer and/or the Replacement Supplier and/or Replacement Sub-Contractor. During the Termination Assistance Period, the Supplier shall and shall procure that any relevant Sub-Contractor shall: give the Customer and/or the Replacement Supplier and/or Replacement Sub-Contractor reasonable access to the Supplier's personnel and/or their consultation representatives to present the case for transferring their employment to the Customer and/or the Replacement Supplier and/or to discuss or consult on any measures envisaged by the Customer, Replacement Supplier and/or Replacement Sub-Contractor in respect of persons expected to be Transferring Supplier Employees; co-operate with the Customer and the Replacement Supplier to ensure an effective consultation process and smooth transfer in respect of Transferring Supplier Employees in line with good employee relations and the effective continuity of the Services. The Supplier shall immediately notify the Customer or, at the direction of the Customer, the Replacement Supplier of any period of notice given by the Supplier or received from any person referred to in the Staffing Information, regardless of when such notice takes effect. The Supplier shall not for a period of twelve (12) months from the date of transfer re-employ or re-engage or entice any employees, suppliers or Sub-Contractors whose employment or engagement is transferred to the Customer and/or the Replacement Supplier except that this paragraph 10.5 shall not apply where an offer is made pursuant to an express right to make such offer under Call Off Schedule 10.1 (Staff Transfer) in respect of a Transferring Supplier Employee not identified in the Supplier's Final Supplier Personnel List.

  • Manufacturer A firm that operates or maintains a factory or establishment that produces on the premises, the materials or supplies obtained by the Contractor. Regular Dealer - A firm that owns, operates, or maintains a store, warehouse, or other establishment in which the materials or supplies required for the performance of the contract are bought, kept in stock, and regularly sold to the public in the usual course of business. A regular dealer engages in, as its principal business and in its own name, the purchase and sale or lease of the products in question. A regular dealer in such bulk items as steel, cement, gravel, stone, and petroleum products need not keep such products in stock, if it owns and operates distribution equipment for the products. Brokers and packagers are not regarded as manufacturers or regular dealers within the meaning of this section. North Carolina Unified Certification Program (NCUCP) - A program that provides comprehensive services and information to applicants for DBE certification, such that an applicant is required to apply only once for a DBE certification that will be honored by all recipients of USDOT funds in the state and not limited to the Department of Transportation only. The Certification Program is in accordance with 49 CFR Part 26. United States Department of Transportation (USDOT) - Federal agency responsible for issuing regulations (49 CFR Part 26) and official guidance for the DBE program. Forms and Websites Referenced in this Provision DBE Payment Tracking System - On-line system in which the Contractor enters the payments made to DBE subcontractors who have performed work on the project. xxxxx://xxxx.xxx.xxxxx.xx.xx/Vendor/PaymentTracking/ DBE-IS Subcontractor Payment Information - Form for reporting the payments made to all DBE firms working on the project. This form is for paper bid projects only. xxxx://xxx.xxxxx.xxx/doh/forms/files/DBE-IS.xls RF-1 DBE Replacement Request Form - Form for replacing a committed DBE. xxxx://xxxxxxx.xxxxx.xxx/projects/construction/Construction%20Forms/DBE%20MBE%20WBE %20Replacement%20Request%20Form.pdf SAF Subcontract Approval Form - Form required for approval to sublet the contract. xxxx://xxxxxxx.xxxxx.xxx/projects/construction/Construction%20Forms/Subcontract%20Approval %20Form%20Rev.%202012.zip JC-1 Joint Check Notification Form - Form and procedures for joint check notification. The form acts as a written joint check agreement among the parties providing full and prompt disclosure of the expected use of joint checks. xxxx://xxxxxxx.xxxxx.xxx/projects/construction/Construction%20Forms/Joint%20Check%20Notif ication%20Form.pdf Letter of Intent - Form signed by the Contractor and the DBE subcontractor, manufacturer or regular dealer that affirms that a portion of said contract is going to be performed by the signed DBE for the amount listed at the time of bid. xxxx://xxxxxxx.xxxxx.xxx/letting/LetCentral/Letter%20of%20Intent%20to%20Perform%20as%20 a%20Subcontractor.pdf

Time is Money Join Law Insider Premium to draft better contracts faster.