Common use of Exterior Doors Clause in Contracts

Exterior Doors. Remove existing doors, jamb, casing, threshold, and haul these materials/debris away (per Section 2.19 - 2.20). Modify opening to accept standard size door as needed. Replace xxxx xxxx, if deteriorated or necessary, set buck in premium silicone sealant. Countersink all fasteners into frame; fill with wood putty and sand smooth. Repair all damaged and adjacent surfaces inside and out, caused by door removal and modifications, restoring to original condition. The door and its components shall be installed in strict compliance with the Florida Building Code product approval (or Miami/Dade NOA). Furnish and install new out-swing impact resistant six panels, steel exterior door complete with jamb, casing, and brick molding. Doors must be 1-3/4 inch solid core door. Install panoramic peephole (exclude the utility room door), aluminum weather-stripping saddle, weather-stripping and spring/chain stop or doorstop. Install tamper proof hinges.  The doorknob should be an entry-type, which can be locked by turn button inside or a key outside. Deadbolt will have turn piece inside and keyed to knob outside. The doorknob and deadbolt shall be keyed alike. Install the same doorknob and deadbolt as outlined in the product approval.  Paint the new exterior door, by applying one coat of LOW or ZERO VOC primer/sealer and two coats of 100% LOW or ZERO VOC on the exterior paint and one coat of ZERO VOC primer/sealer and two coats of 100% ZERO VOC on the interior paint. Material allowance for paint must be mid-grade or better of the City approved brands, i.e., Xxxxxxxx Xxxxx (Aura or EcoSpec), Xxxxxxx Xxxxxxxx (Harmony), Xxxxxxx/ICI (Life master) PPG (Pure Performance), Olympic (Valspar).