Claim Acceptance and Rejection Sample Clauses

Claim Acceptance and Rejection. Supplier shall, within fifteen (15) Business Days after receipt of both (i) a Warranty Notice; and (ii) the materials that are the subject of such Warranty Notice (the “Warranty Notice Period”) (which materials will be deemed received by Supplier for this purpose if shipped or ferried to an Alternative Repair Facility permitted under the provisions of this Schedule 8), inspect the materials or workmanship which are the subject of the Warranty Notice and give notice to Customer of the Warranty Claims included in the Warranty Notice which Supplier accepts (“Accepted Warranty Claims”) and the Warranty Claims included in the Warranty Notice which Supplier disputes (“Disputed Warranty Claims”) (together the “Supplier Warranty Response”). CAM Conversion Agreement Those portions of this Agreement marked with an [*] have been omitted pursuant to a request for confidential treatment and have been filed separately with the SEC.
AutoNDA by SimpleDocs

Related to Claim Acceptance and Rejection

  • Acceptance and Rejection Jubilant shall be entitled to reject any shipment of Products that fails to conform to the Product Specifications or Packaging Specifications at the time of delivery to Jubilant. Jubilant shall notify Cadista of such rejection within thirty (30) days after delivery of such Products shipment to Jubilant, and shall set forth in such notification the basis under this Agreement for such rejection, including any testing or inspection results, provided, however, that in the event any such non-conformity is latent or was not obvious and could not be readily discovered from a physical inspection of the Products shipment, Jubilant may give written notice to Cadista of its rejection of such shipment within thirty (30) days after Jubilant's discovery of such non-conformance. Failure to so notify Cadista, or failure to identify the basis under this Agreement for rejection of any Product, shall constitute acceptance of such Product, except to the extent the Product fails to conform to the Product Specifications or Packaging Specifications as the case may be. After such failure to notify, Jubilant shall be obligated to make payment for such Product in accordance with pricing provisions of this Agreement. If the parties disagree as to whether any Product meets the Product Specifications or Packaging Specifications and the parties are unable to negotiate a commercially reasonable resolution, then samples and/or batch records, as appropriate, from the disputed shipment shall promptly be submitted for testing and evaluation to an independent Third Party as shall be agreed to in writing by both parties. The determination of such Third Party as to whether the disputed Product shipment meets the Product Specifications or Packaging Specifications shall be final and binding. The cost of the testing and evaluation by the independent third party shall be borne by the party whose position is found to be erroneous. If, pursuant to this Section 3.2, any Products are found not to conform to the Product Specifications or Packaging Specifications, as a result of a cause occurring prior to placement thereof with the carrier (and not arising as a result of the Materials being defective or failing to meet their respective specifications), at Cadista’s option, Jubilant shall either (i) deliver such non-conforming Products to Cadista or (ii) destroy such non-conforming Products in accordance with applicable laws, rules and regulations. Cadista shall reimburse Jubilant for all reasonable costs and expenses in connection such delivery or destruction, and, at Cadista’s option and as Jubilant’s exclusive remedy, Cadista shall either: (i) credit Jubilant for the amount paid or payable by Jubilant to Cadista for such rejected Product shipment (and reimburse Jubilant for the Material of such rejected batch at Jubilant’s cost for such Materials), or (ii) replace such rejected Product shipment (with Cadista paying Jubilant for all Materials or such replacement shipment in an amount equal to Jubilant’s cost), at no additional cost to Jubilant, as promptly as reasonably practicable, but in no event later than forty-five (45) days from receipt of notice of non-conformity of such shipment from Jubilant. Jubilant shall notify Cadista in writing of any claim relating to quantitative deficiencies in any shipment of Product that Jubilant considers to have been caused prior to shipment hereunder within thirty (30) days following receipt of any such shipment. Any claim for a quantitative deficiency which is not made within such thirty (30) days shall be deemed to have been waived by Jubilant and Jubilant shall be obligated to make payment for such Product in accordance with Section 5 of this Agreement. In the event Jubilant determines there is a quantitative deficiency from the applicable shipping documentation, the parties shall investigate such deficiency and, if the parties agree that such deficiency occurred prior to shipment, Cadista shall, at Jubilant’s option and as Jubilant’s exclusive remedy for such quantitative deficiency, (a) credit Jubilant for the amount paid by Jubilant to Cadista in excess of the aggregate price for actual quantities shipped; or (b) subject to Cadista having Product on hand at the time of request by Jubilant, rectify any such deficiency by promptly shipping the appropriate quantities of any relevant Product to Jubilant, but in no event later than fifteen (15) calendar days following the occurrence of such a deficiency, in which case Jubilant shall be obligated to pay for any such quantities pursuant to Section 5 of this Agreement.

  • Acceptance; Rejection A holder of Notes may accept the offer to prepay made pursuant to this Section 8.3 by causing a notice of such acceptance to be delivered to the Company not later than 15 days after receipt by such holder of the most recent offer of prepayment. A failure by a holder of Notes to respond to an offer to prepay made pursuant to this Section 8.3 shall be deemed to constitute a rejection of such offer by such holder.

  • Final Acceptance 1. Within thirty (30) days of the date of receipt by Purchaser and Independent Engineer of the Final Commissioning Report, the Purchaser shall issue a Certificate of Final Acceptance or reject such Report. If the Purchaser neither issues a Certificate of Final Acceptance nor rejects such Report within such thirty (30) day period, then the Date of Final Acceptance of the System shall be deemed to be the date such Final Commissioning Report was received by the Purchaser.

  • Rejection State Street reserves the right to decline to process or delay the processing of a payment order which (a) is in excess of the collected balance in the account to be charged at the time of State Street's receipt of such payment order; (b) if initiating such payment order would cause State Street, in State Street's sole judgment, to exceed any volume, aggregate dollar, network, time, credit or similar limits upon wire transfers which are applicable to State Street; or (c) if State Street, in good faith, is unable to satisfy itself that the transaction has been properly authorized.

  • Order Acceptance All purchase orders are subject to acceptance by LipoMatrix at its Neuchatel office. LipoMatrix shall have no obligation or liability to Distributor with respect to purchase orders which are not accepted; however LipoMatrix shall not unreasonably reject any purchase order. LipoMatrix shall use reasonable efforts to deliver Products covered by accepted purchase orders at the times specified in the corresponding quotation or written acceptance of Distributor's purchase order. Any orders in the ordinary course of business, consistent with normal ordering practices, that are rejected by LipoMatrix shall be deducted from the purchase quota for such Ordering Year as set forth in Section III.B.1. Distributor's purchase orders hereunder shall be governed by the terms and conditions of this Agreement. Nothing contained in any purchase order shall in any way modify or add any terms or conditions of sale.

  • Acceptance or Rejection (a) The undersigned understands and agrees that the Company reserves the right to reject this subscription for the Shares if, in its reasonable judgment, it deems such action in the best interest of the Company, at any time prior to the Closing, notwithstanding prior receipt by the undersigned of notice of acceptance of the undersigned's subscription.

  • Acceptance and Term The Company agrees to employ Employee, and Employee agrees to serve the Company, on the terms and conditions set forth herein. The Term shall commence on the date hereof and shall continue until terminated in accordance with Section 8 hereof.

  • Acceptance Testing The MCP must have the capability to report all elements in the Minimum Data Set as set forth in the ODJFS Encounter Data Specifications and must submit a test file in the ODJFS-specified medium in the required formats prior to contracting or prior to an information systems replacement or update. Acceptance testing of encounter data is required as specified in Section 29(a)(v) of this Appendix.

  • Prompt Acceptance of Agreement The Restricted Share Unit grant evidenced by this Agreement shall, at the discretion of the Administrator, be forfeited if this Agreement is not manually executed and returned to the Company, or electronically executed by Awardee by indicating Awardee’s acceptance of this Agreement in accordance with the acceptance procedures set forth on the Company’s third-party equity plan administrator’s web site, within 90 days of the Grant Date.

  • Delivery; Acceptance of Premises; Commencement Date Landlord shall use reasonable efforts to deliver the Premises to Tenant on or before the Target Commencement Date, with Landlord’s Work Substantially Completed (“Delivery” or “Deliver”). If Landlord fails to timely Deliver the Premises, Landlord shall not be liable to Tenant for any loss or damage resulting therefrom, and this Lease shall not be void or voidable except as provided herein. If Landlord does not Deliver the Premises within 90 days of the Target Commencement Date for any reason other than Force Majeure delays and Tenant Delays, this Lease may be terminated by Landlord or Tenant by written notice to the other, and if so terminated by either: (a) the Security Deposit, or any balance thereof (i.e., after deducting therefrom all amounts to which Landlord is entitled under the provisions of this Lease), shall be returned to Tenant, and (b) neither Landlord nor Tenant shall have any further rights, duties or obligations under this Lease, except with respect to provisions which expressly survive termination of this Lease. As used herein, the terms “Landlord’s Work,” “Tenants’ Work,” and “Force Majeure Delays” shall have the meanings set forth for such terms in the Work Letter. If neither Landlord nor Tenant elects to void this Lease within 10 business days of the lapse of such 90 day period, such right to void this Lease shall be waived and this Lease shall remain in full force and effect; provided, however, that if Landlord does not Deliver the Premises within 150 days of the Target Commencement Date for any reason other than Force Majeure delays and Tenant Delays, this Lease may be terminated by Tenant by written notice to Landlord, in which case subsections (a) and (b) of this paragraph shall apply. If Tenant does not elected to void this Lease within 10 business days of the lapse of such 150 day period, such right to void this Lease shall be waived and this Lease shall remain in full force and effect.

Time is Money Join Law Insider Premium to draft better contracts faster.