ACCOUNTABILITY AND COMMITMENT TO PARTICIPATE IN THE ACO Sample Clauses

ACCOUNTABILITY AND COMMITMENT TO PARTICIPATE IN THE ACO. ACO Participant agrees to become and remain accountable for the quality, cost and overall care of attributed lives. Toward that end, ACO Participant will comply with and implement the ACO's Clinical Model to: (1) promote evidence based medicine; (2) promote patient engagement; (3) develop and implement infrastructure and reporting on quality and cost metrics to enable monitoring and feedback of performance in order to evaluate performance and improve care over time; (4) coordinate care; and (5) comply with applicable Shared Savings Program guidance and regulations. Notwithstanding anything to the contrary, until such time as may be determined by the Company's Board of Managers, no ACO Participant shall be responsible for any losses incurred by the Company. Accepting losses associated with the Company will be documented by an addendum to this Agreement and must be signed by both Parties to be effective. ACO Participant acknowledges Company intends to include and list ACO Participant as an ACO Participant in its Shared Savings Program application. ACO Participant understands that it shall be so included. ACO Participant is committed to the mission of the ACO and shall help ensure the ACO's success by complying with the terms and conditions of this Agreement and those policies that may be adopted by the ACO's Governing Body from time to time.
Sample 1
AutoNDA by SimpleDocs

Related to ACCOUNTABILITY AND COMMITMENT TO PARTICIPATE IN THE ACO

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Secondary / Post-Secondary Program Alignment Welding HIGH SCHOOL COURSE SEQUENCE 9th Grade 10th Grade 11th Grade 12th Grade English 9 Algebra I World History/Geography Biology World Language Phys Ed/Health English 10 Geometry U.S. History/Geography Physics or Chemistry World Language Visual/Performing/Applied Arts English 11 Algebra II Civics/Economics Welding English 12 Math Credit Science Credit Welding WASHTENAW COMMUNITY COLLEGE Welding Associate in Applied Science Semester 1 Math Elective(s)* 3 WAF 105 Introduction to Welding Processes 2 WAF 111 Oxy-fuel Welding 4 WAF 112 Shielded Metal Arc Welding 4 Semester Total 13 Semester 2 Speech Elective(s) 3 WAF 106 Blueprint Reading for Welders 3 WAF 123 Advanced Oxy-fuel Welding 4 WAF 124 Advanced Shielded Metal Arc Welding 4 Semester Total 14 Semester 3 Arts/Human. Elective(s) 3 Computer Lit. Elective(s) 3 WAF 215 Advanced Gas Tungsten Arc Welding 4 WAF 288 Gas Metal Arc Welding 4 Semester Total 14 Semester 4 WAF 200 Layout Theory Welding 3 WAF 210 Welding Metallurgy 3 Soc. Sci. Elective(s) 3 WAF 226 Specialized Welding Procedures 4 Semester Total 13 Semester 5 Nat. Sci. Elective(s) 4 WAF 227 Basic Fabrication 3 WAF 229 Shape Cutting Operations 3 Writing Elective(s) 3 Semester Total 13 Program Totals 67

  • Federal Funding Accountability and Transparency Act (FFATA Subrecipient shall comply with the requirements of 2 CFR part 25 Universal Identifier and System for Award Management (XXX). Subrecipient must have an active registration in XXX, xxxxx://xxx.xxx.gov/XXX/ in accordance with 2 CFR part 25, appendix A, and must have a Data Universal Numbering System (DUNS) number xxxxx://xxxxxx.xxx.xxx/webform/ Subrecipient must also comply with provisions of the Federal Funding Accountability and Transparency Act, which includes requirements on executive compensation, 2 CFR part 170 Reporting Subaward and Executive Compensation Information.

  • STATUTORY PENALTY FOR INADEQUATE QUALIFIED INVESTMENT Pursuant to Section 313.0275 of the TEXAS TAX CODE, in the event that the Applicant fails to make $10,000,000 of Qualified Investment, in whole or in part, during the Qualifying Time Period, the Applicant is liable to the State for a penalty. The amount of the penalty is the amount determined by: (i) multiplying the maintenance and operations tax rate of the school district for that tax year that the penalty is due by (ii) the amount obtained after subtracting (a) the Tax Limitation Amount identified in Section 2.4.B from (b) the Market Value of the property identified on the Appraisal District's records for the Tax Year the penalty is due. This penalty shall be paid on or before February 1 of the year following the expiration of the Qualifying Time Period and is subject to the delinquent penalty provisions of Section 33.01 of the TEXAS TAX CODE. The Comptroller may grant a waiver of this penalty in the event of Force Majeure which prevents compliance with this provision.

  • SMALL BUSINESS PARTICIPATION AND DVBE PARTICIPATION REPORTING REQUIREMENTS a. If for this Contract Contractor made a commitment to achieve small business participation, then Contractor must within 60 days of receiving final payment under this Contract (or within such other time period as may be specified elsewhere in this Contract) report to the awarding department the actual percentage of small business participation that was achieved. (Govt. Code § 14841.)

  • CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.

  • Wall Street Transparency and Accountability Act In connection with Section 739 of the Wall Street Transparency and Accountability Act of 2010 (“WSTAA”), the parties hereby agree that neither the enactment of WSTAA or any regulation under the WSTAA, nor any requirement under WSTAA or an amendment made by WSTAA, shall limit or otherwise impair either party’s otherwise applicable rights to terminate, renegotiate, modify, amend or supplement this Confirmation or the Agreement, as applicable, arising from a termination event, force majeure, illegality, increased costs, regulatory change or similar event under this Confirmation, the Equity Definitions incorporated herein, or the Agreement (including, but not limited to, rights arising from Change in Law, Hedging Disruption, Increased Cost of Hedging, an Excess Ownership Position, or Illegality (as defined in the Agreement)).

  • A Service Accountability Agreement This Agreement is a service accountability agreement for the purposes of section 20(1) of LHSIA.

  • SECTION 109 OF THE HOUSING AND COMMUNITY DEVELOPMENT ACT OF 1974 The Contractor shall comply with the provisions of Section 109 of the Housing and Community Development Act of 1974. No person in the United States shall on the grounds of race, color, national origin, or sex be excluded from participation in, be denied the benefits of, or be subjected to discrimination under any program or activity funded in whole or in part with funds made available under this title. Section 109 further provides that discrimination on the basis of age under the Age Discrimination Act of 1975 or with respect to an otherwise qualified handicapped individual as provided in Section 504 of the Rehabilitation Act of 1973, as amended, is prohibited.

  • Financial Participation Prohibited Under Section 2155.004, Texas Government Code (relating to financial participation in preparing solicitations), Contractor certifies that the individual or business entity named in this Contract and any related Solicitation Response is not ineligible to receive this Contract and acknowledges that this Contract may be terminated and payment withheld if this certification is inaccurate.

  • New Hampshire Specific Data Security Requirements The Provider agrees to the following privacy and security standards from “the Minimum Standards for Privacy and Security of Student and Employee Data” from the New Hampshire Department of Education. Specifically, the Provider agrees to:

Time is Money Join Law Insider Premium to draft better contracts faster.