Wire Coating definition

Wire Coating means the process of applying a coating of electrically insulating varnish or enamel to aluminum or copper wire for use in electrical machinery.

Examples of Wire Coating in a sentence

  • Therefore, pursuant to 326 IAC 8-2-1(a)(4), these ovens are subject to 326 IAC 8- 2-8 (Magnet Wire Coating Operations).

  • I-X Wire Coating: Category I (Price Lines 00021-00040 & 00051-00060 & 00070-00074 & 00080-00084 & 00090-00094) The p.v.c. wire coating shall be plasticized, unfilled, melt-mixed, polyvinyl chloride (pvc) with non- migratory low temperature plasticizer, shall not support fire combustion and be insulated for 12,000 volts.

  • EPA is approving the following rules into the California SIP:—Bay Area Air Quality Management District (BAAQMD)—Rule 8–26, Magnet Wire Coating Operations;—Kern County Air Pollution Control District (KCAPCD)—Rule 410.4,Surface Coating of Metal Parts and Products;—Monterey Bay Unified Air Pollution Control District (MBUAPCD)—Rule 434, Coating of Metal Parts andProducts; and,—South Coast Air Quality Management District (SCAQMD)—Rule 1107,Coating of Metal Parts and Products.

  • Compliance with the above limit combined with the potential to emit VOC from the Topical Lubricant applications and insignificant activities associated with the Magnet Wire Coating Oven EU201, shall limit the VOC emissions of this modification to less than 40 tons per twelve (12) consecutive month period and shall render 326 IAC 2-2 not applicable.

  • Webster, ‘Modelling Polymer Melt Flows in Wire Coating Processes’, J.

  • I-X Wire Coating: Category I (Price Lines 00021-00040 & 00051-00060 & 00070- 00074 & 00080-00084 & 00090-00094) The P.V.C. wire coating shall be plasticized, unfilled, melt-mixed, polyvinyl chloride (PVC) with non-migratory low temperature plasticizer, shall not support fire combustion and be insulated for 12,000 volts.

  • D.1.2 Volatile Organic Compounds (VOC) Limitations [326 IAC 8-2-8]Pursuant to 326 IAC 8-2-8, the Permittee of the Magnet Wire Coating Oven EU-201 shall not allow the discharge of any Volatile Organic Compounds into the atmosphere in excess of 1.7 pounds per gallon of coating, excluding water, delivered to the coating applicator.

  • SECTION D.5 FACILITY OPERATION CONDITIONS Facility Description [326 IAC 2-7-5(15)] Wire Coating Plant (b) The following eleven (11) wire enameling ovens with add on thermal incinerators for control: (1) Five (5) wire enameling ovens with add on thermal incinerators for control, identified as emission units 53, 54, 55, 56 and 57, with a maximum capacity of 157.63 pounds of aluminum wire per hour each or a maximum capacity of 399.2 pounds of copper wire per hour each.

  • Therefore, pursuant to 326 IAC 8-2-1(a)(4), these ovens are subject to 326 IAC 8-2-8 (Magnet Wire Coating Operations).

  • Haroon(2011), Optimal Homotopy Asymptotic Method Solution of Unsteady Second Grade Fluid in Wire Coating Analysis.

Related to Wire Coating

  • Wire Center means the location of one (1) or more local switching systems. It is also a point at which End User’s loops within a defined geographic area converge. Such local loops may be served by one (1) or more Central Office Switches within such premises.

  • Serving Wire Center (SWC) means a Wire Center that serves the area in which the other Party’s or a third party’s Wire Center, aggregation point, point of termination, or point of presence is located.

  • Fire Chief means the chief of the Fire Department.

  • Wire communication means any aural transfer made in whole or in part through the use of facilities for the transmission of communications by the aid of wire, cable, or other like connection between the point of origin and the point of reception (including the use of such connection in a switching station) furnished or operated by any person engaged in providing or operating such facilities for the transmission of interstate or foreign communications or communications affecting interstate or foreign commerce;

  • Tier 3 Wire Centers means those Qwest Wire Centers that do not meet the criteria for Tier 1 or Tier 2 Wire Centers.

  • Serving Wire Center (SWC means the Wire Center that serves the area in which the other Party’s or a Third Party’s Wire Center, aggregation point, point of termination, or point of presence is located.

  • Fire Code means Ontario Regulation 213/07, as amended, and any successor regulation.

  • Entire Contract This Contract constitutes the entire contract and understanding between you and XOOM with respect to its subject matter and superseding all prior written and oral contracts and representations made with respect to the subject matter.

  • Tier 1 Wire Centers means those CenturyLink Wire Centers that contain at least four (4) Fiber- based Collocators, at least thirty-eight thousand (38,000) Business Lines, or both. Tier 1 Wire Centers also are those CenturyLink tandem switching locations that have no line-side switching facilities, but nevertheless serve as a point of traffic aggregation accessible by CLEC. Once a Wire Center is determined to be a Tier 1 Wire Center, that Wire Center is not subject to later reclassification as a Tier 2 or Tier 3 Wire Center.

  • Tier 2 Wire Centers means those CenturyLink Wire Centers that are not Tier 1 Wire Centers, but contain at least three (3) Fiber-based Collocators, at least twenty-four thousand (24,000) Business Lines, or both. Once a Wire Center is determined to be a Tier 2 Wire Center, that Wire Center is not subject to later reclassification as a Tier 3 Wire Center.

  • Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Nuclear coating means a protective coating formulated and recommended to seal porous surfaces such as steel (or concrete) that otherwise would be subject to intrusions by radioactive materials. These coatings must be resistant to long-term (service life) cumulative radiation exposure [ASTM method D4082], relatively easy to decontaminate, and resistant to various chemicals to which the coatings are likely to be exposed [ASTM method D3912].

  • Solutions means Products and Services provided under this “CPE Products & Services; Professional Services” Section.

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Furniture coating means any paint designed for application to room furnishings including, but not limited to, cabinets (kitchen, bath and vanity), tables, chairs, beds, and sofas.

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Prime coat means the first of two or more films of coating applied to a metal surface.

  • Drive means to operate or be in actual physical control of a

  • Loop or "Unbundled Loop" shall have the meaning set forth in Section 9.2.1.

  • Frontage means and refer to all the property on one side of a street between two intersecting streets measured along the line of the street, or if the street is dead-ended, then all of the property abutting on one side between an intersecting street and the dead end of the street.

  • CSC means the Civil Service Commission of the City and County of San Francisco.

  • Specialty coating means any coating that is manufactured and used for one (1) of the following specialized applications: