Storage Coefficient definition

Storage Coefficient means the volume of water an aquifer releases from or takes into storage per unit surface area of the aquifer per unit change in head.
Sample 1Sample 2Sample 3
Storage Coefficient means the volume of water released from storage by a confined aquifer per unit surface area of aquifer per unit decline in hydraulic head normal to the surface and equal to the product of specific storage and the saturated thickness (dimensionless).
Sample 1Sample 2Sample 3
Storage Coefficient means a unitless number used by the District in evaluating permit applications. To be valid for use by the District in such evaluations a “Storage Coefficient” must be larger than 1.0E -6.
Sample 1

Examples of Storage Coefficient in a sentence

  • An enhanced Variable Storage Coefficient method was used for dynamic channel flow routing.

  • Storage Coefficient is smaller than DT! Use a smaller DT or a larger area.

  • A Budget sheet will be available for 1, 2, or 3 years depending on the number of years you have indicated.

  • Storage Coefficient and Transmissivity as a Fuzzy NumbersWhen using the same example described in above paragraph for comparison once for transmissivity as a fuzzy number only and the other for transmissivity and storage coefficient as fuzzy numbers.

  • Halihan, 2009, Analyzing Naturally-Induced Stresses to Determine the Storage Coefficient of the Arbuckle-Simpson Aquifer, GSA, South-Central Sectional Meeting, Dallas, Texas, March 2009.

  • However, these assertion failures were due to developers mistakenly using assert instead of require.

  • Channel routing is carried out using the Variable Storage Coefficient method with modifications to account for changing water surface slope during a flood.

  • It was possible to model both the Storage Coefficient (R) and Time of Concentration (Tc) with a coefficient of correlation of 0.99 and 0.90 respectively.

  • R.S. Beniwal, Manju Dabas and Ramvir Singh “Prediction of Effective Heat Storage Coefficient of Multi-phase Materials” Defect and Diffusion Forum Journal, Trans Tech Publication Inc., Switzerland, 326-328 (2012) 132-140.

  • The analysis of the baseline data did not provide any major revelations as to this sectors compliance with air quality requirements.


More Definitions of Storage Coefficient

Storage Coefficient means the volume of water an aquifer releases from or takes into storage per unit surface area of the aquifer per unit change in head. It equals the product of specific storage and aquifer thickness. Also known as storativity.
Sample 1

Related to Storage Coefficient

  • Coefficient means a number that represents the quantified relationship of each variable to the assessed value of a property when derived through a mass appraisal process

  • Runoff coefficient means the fraction of total rainfall that will appear at the conveyance as runoff.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • storage vessel means a pressure vessel as defined in the Regulations for Pressure Vessels made under the Occupational Health and Safety Act;

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Throughput means the measure of production, or factor related to production, used to determine the relationship between the amount of energy used by the target unit and the levels of activity of the target unit, as set out in Schedule 6 to an underlying agreement; “the Tribunal” means the First-tier Tribunal established under the Xxxxxxxx Xxxxxx xxx Xxxxxxxxxxx Xxx 00000;

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Seasonal high water table means the highest zone of soil or rock that is seasonally or permanently saturated by a perched or shallow water table. A planar surface, below which all pores in rock or soil (whether primary or secondary) that is seasonally or permanently saturated.

  • Storage container means a device in which sealed sources or radiation machines are secured and stored.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per

  • Gasohol means a blended fuel composed of gasoline and fuel grade ethanol.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • high-efficiency cogeneration means cogeneration meeting the criteria laid down in Annex II;

  • Psig means pounds per square inch gauge.

  • Pressure means the total load or force per unit area acting on a surface.

  • Finished grade means the grade upon completion of the fill or excavation.

  • Landfill Gas means any gas derived through any biological process from the decomposition of waste buried within a waste disposal site.

  • LNG means liquefied natural gas.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Altitude means the vertical distance of a level, a point or an object considered as a point, measured from mean sea level (MSL);

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Scaling as used herein, involves: