Activation or "Activated" shall mean the date on which (i) with respect to the Limited Partnership, the Limited Partnership is formed and (ii) with respect to the Production Partnership, the Limited Partnership shall have made its capital contribution to the Production Partnership.
Deactivation means the retirement or mothballing of a generating unit governed by Tariff, Part V. Deactivation Avoidable Cost Credit:
Interconnection Activation Date means the date that the construction of the joint facility Interconnection arrangement has been completed, trunk groups have been established, joint trunk testing is completed and trunks have been mutually accepted by the Parties.
Assisted amusement device means an amusement device, skill device, or ride
Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.
Reactivation means the process whereby an inactive licensee obtains a current license.
Open type traction battery means a type of battery requiring filling with liquid and generating hydrogen gas that is released to the atmosphere.
Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.
Activated means the status of any capacity or part of the Cable System in which any Cable Service requiring the use of that capacity or part is available without further installation of system equipment, whether hardware or software.
Loop Concentrator/Multiplexer or "LCM" is the Network Element that does one or more of the following: aggregates lower bit rate or bandwidth signals to higher bit rate or bandwidth signals (multiplexing); disaggregates higher bit rate or bandwidth signals to lower bit rate or bandwidth signals (demultiplexing); aggregates a specified number of signals or channels to fewer channels (concentrating); performs signal conversion, including encoding of signals (e.g., analog to digital and digital to analog signal conversion); or in some instances performs electrical to optical (E/O) conversion. LCM includes DLC, and D4 channel banks and may be located in Remote Terminals or Central Offices.
Cannabis processing facility means a person that:
Synchronous Optical Network (SONET) is an optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC-1/STS-1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.
embedded generator means a generator who is not a market participant and whose generation facility is connected to a distribution system of a distributor, but does not include a generator who consumes more electricity than it generates;
Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.
Stationary beam radiation therapy means radiation therapy without displacement of one or more mechanical axes relative to the patient during irradiation.
Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.
Activation Date means the date upon which MLBFS shall cause the WCMA Line of Credit to be fully activated under MLPF&S' computer system as part of the WCMA Program.
Increased Facility Activation Notice a notice substantially in the form of Exhibit G.
IntraLATA LEC Toll means IntraLATA Toll traffic carried solely by a Local Exchange Carrier and not by an IXC. "IntraLATA Toll Traffic" describes IntraLATA Traffic outside the Local Calling Area.
Outdoor cultivation means the cultivation of mature cannabis without the use of artificial lighting or light deprivation in the canopy area at any point in time. Artificial lighting is permissible only to maintain immature plants outside the canopy area.
Emergency contraception means any health care treatment approved by the food and drug administration that prevents pregnancy, including but not limited to administering two increased doses of certain oral contraceptive pills within seventy-two hours of sexual contact.
Service Drop means the overhead service conductors from the service point to the connection to the service-entrance conductors at the building or other structure.
IntraLATA Toll Traffic means the IntraLATA traffic, regardless of the transport protocol method, between two locations within one LATA where one of the locations lies outside of the mandatory local calling area as defined by the Commission.
Processing facility means an establishment that prepares, treats, or converts tangible personal property into finished goods or another form of tangible personal property. The term includes a business engaged in processing agricultural, aquacultural, or maricultural products and specifically includes meat, poultry, and any other variety of food processing operations. It does not include an establishment in which retail sales of tangible personal property are made to retail customers.
Automated data acquisition and handling system or "DAHS" means that component of the continuous emission monitoring system, or other emissions monitoring system approved for use under section 11 of this rule, designed to interpret and convert individual output signals from pollutant concentration monitors, flow monitors, diluent gas monitors, and other component parts of the monitoring system to produce a continuous record of the measured parameters in the measurement units required by section 11 of this rule.
Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.