Radius of curvature definition

Radius of curvature means the approximate extent of the round as distinct from a precise geometrical form.
Sample 1Sample 2Sample 3
Radius of curvature means the radius of the arc of a circle which comes closest to the rounded form of the component under consideration.
Sample 1Sample 2Sample 3
Radius of curvature means the radius arc denoting the curved surface from the point or departure from the springline (vertical sidewall) of the pool to the pool bottom.
Sample 1Sample 2Sample 3

Examples of Radius of curvature in a sentence

  • Supports shall be so designed and constructed as to be: 8.30.4.4.1. Free from all unnecessary sharp edges and projections which might cause injury to the rider, the passenger or third parties coming into contact with the support (Radius of curvature of not less than 2.5 mm is considered to satisfy this requirement); 8.30.4.4.2. Easy to use and precise in their action; 8.30.4.4.3. Unlikely to cause permanent deformation of the supporting surface when in the open or parking position.

  • Dispersive power of the material of a prism – Spectrometer.2. Determination of wavelengths of white source – Diffraction grating.3. Newton’s Rings – Radius of curvature of Plano convex lens.

  • Radius of curvature and curve tracing for Cartesian, parametric and polar curves.

  • Radius of curvature of the fairway: measured on a plan or a map, the radius of an arc on the axis of the fairway (4).

  • Curvature and Radius of curvature - Cartesian, Parametric, Polar and Pedal forms.

  • Radius of curvature; Centre and circle of curvature – evolutes and envelopes.

  • Radius of curvature, Special formula for parametric equations, Radius of curvature at the origin.

  • Determination of Radius of curvature of a Plano convex lens using Newton’s rings Method.

  • Calculus of one variable: Curvature – Radius of curvature – Cartesian & polar equation (simple problems) - centre & circle of curvature.

  • Radius of curvature - Cartesian, parametric, polar and pedal forms.7 HoursUNIT – 3Differential Calculus - 3Partial differentiation: Partial derivatives, total derivative and chain rule, Jacobians-direct evaluation.Taylor’s expansion of a function of two variables-illustrative examples*.


More Definitions of Radius of curvature

Radius of curvature means the approximate extent of the round as distinct from a precise geometrical form.Figure 1 α > 45° : group 1α < 45° : group 2Thus for the fullest striking contact α = 0°.
Sample 1
Radius of curvature. : means radius of the arc of the circle most closely approaching the rounded shape of the part under consideration.
Sample 1
Radius of curvature means the length of radius of a circle used to define a curve.
Sample 1
Radius of curvature means the radius of the arc of a circle which comes closest to the rounded form of the component under consideration;" Insert new paragraphs 2.6. to 2.9., to read:
Sample 1
Radius of curvature means the approximate extent of the round as distinct from a precise geometrical form. E/ECE/324 Rev.1/Add.25 Regulation No. 26 page 2
Sample 1

Related to Radius of curvature

  • the trunk road means the A590 Trunk Road;

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Width means, in relation to a lot,

  • Taximeter means any device for calculating the fare to be charged in respect of any journey in a hackney carriage or private hire vehicle by reference to the distance travelled or time elapsed since the start of the journey, or a combination of both; and

  • Point / “Pip” shall mean the numerical value of the last, or right-most, digit of a Quote.

  • Ionizing radiation means gamma rays, x-rays, alpha and beta particles, high speed electrons, protons, neutrons, and other nuclear particles;

  • Overall width of a vehicle means a dimension which is measured according to ISO standard 612-1978, term No. 6.2. In the case of vehicles of category other than M1, in addition to the provisions of that standard, when measuring the vehicle width the following devices shall not be taken into account:

  • Intersection means (i) the area embraced within the prolongation or connection of the lateral

  • Landing area means that part of a movement area intended for the landing or take-off of aircraft;

  • mile means 5,280 feet.

  • Working voltage means the highest value of an electrical circuit voltage root-mean-square (rms), specified by the manufacturer, which may occur between any conductive parts in open circuit conditions or under normal operating conditions. If the electrical circuit is divided by galvanic isolation, the working voltage is defined for each divided circuit, respectively.

  • Relevant Financial Centre means, with respect to any Floating Rate to be determined in accordance with a Screen Rate Determination on an Interest Determination Date, the financial centre as may be specified as such in the relevant Final Terms or, if none is so specified, the financial centre with which the relevant Benchmark is most closely connected (which, in the case of EURIBOR or EONIA, shall be the Euro-zone and in the case of LIBOR, shall be London) or, if none is so connected, Paris.

  • Financial Centre means such financial centre or centres as may be specified in relation to the relevant currency for the purposes of the definition of “Business Day” in the ISDA Definitions or indicated in the Final Terms or, in the case of Covered Bonds denominated in euro, such financial centre or centres as the Calculation Agent may select.

  • CAFRA Centers, Cores or Nodes means those areas with boundaries incorporated by reference or revised by the Department in accordance with N.J.A.C. 7:7-13.16.

  • Line means a connection to our network or that of our suppliers, whether direct or indirect.

  • Frontage means and refer to all the property on one side of a street between two intersecting streets measured along the line of the street, or if the street is dead-ended, then all of the property abutting on one side between an intersecting street and the dead end of the street.

  • Transboundary movement means any movement of hazardous wastes or other wastes from an area under the national jurisdiction of one State to or through an area under the national jurisdiction of another State or to or through an area not under the national jurisdiction of any State, provided at least two States are involved in the movement;

  • Perimeter means the fenced or walled area of the institution that restrains the movement of the inmates.

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • Relevant Financial Centre Day means a day on which commercial banks and foreign exchange markets settle payments and are open for general business (including dealings in foreign exchange and foreign currency deposits) in the principal financial centre or centres for the currency in which payment falls to be made (or, in the case of payments which fall to be made in euro, a Euro Business Day or, where such currency is a National Currency Unit (as defined in Condition 9) and the Notes have been redenominated into euro pursuant to Condition 9, the former principal financial centre or centres) and in any other place set out in the Final Terms;

  • Basal area means the effective surface area available to transmit the treated effluent from the filter media in a mound system into the in-situ receiving soils. The perimeter is measured at the interface of the imported fill material and in-situ soil. On sloping sites, only the area down-gradient from the up-slope edge of the distribution media may be included in this calculation.

  • Distance means the great circle distance between the aerodrome of departure and the aerodrome of arrival plus an additional fixed factor of 95 km; and

  • Maximum contaminant level (MCL) means the maximum permissible level of a contaminant in water which is delivered to any user of a public water system.

  • stratigraphic test well means a drilling effort, geologically directed, to obtain information pertaining to a specific geologic condition. Ordinarily, such wells are drilled without the intention of being completed for hydrocarbon production. They include wells for the purpose of core tests and all types of expendable holes related to hydrocarbon exploration. Stratigraphic test wells are classified as (i) "exploratory type" if not drilled into a proved property; or (ii) "development type", if drilled into a proved property. Development type stratigraphic wells are also referred to as "evaluation wells".

  • Demarcation Point means the point where Qwest owned or controlled facilities cease, and CLEC, End User Customer, premises owner or landlord ownership or control of facilities begin. "Designed, Verified and Assigned Date" or "DVA" means the date on which implementation groups are to report that all documents and materials have been received and are complete.

  • Geographical Area means North America, Europe or Asia Pacific, as the case may be.