Permeability test definition

Permeability test means testing of the hydrocarbon losses through the walls of the non-metallic fuel storage;
Sample 1Sample 2Sample 3
Permeability test means a scientific procedure using lysimeters and other instrumentation to determine the saturated hydraulic conductivity of site specific soil horizons.
Sample 1Sample 2Sample 3
Permeability test means testing of the losses through the walls of the non-metallic fuel storage and preconditioning the non-metallic fuel storage material prior to fuel storage testing in accordance with Number C8 of Annex II to Regulation (EU) No 168/2013;
Sample 1Sample 2Sample 3

Examples of Permeability test in a sentence

  • Conduct Constant-Head Permeability test and report coefficient of permeability "k".

  • Permeability test shall be conducted in bedrock inside the drilled hole by pumping in water under pressure to determine the percolation capacity of the rock strata.

  • Permeability test, cytokines panel, microbiome analysis and immunotoxic gluten peptides (GIP) were performed at screening period and week 12 (§).

  • Permeability test shall be conducted as per the requirement of Appendix-G of IRS Concrete Bridge Code (DIN: 1048).

  • The Committee believes it is important to make all voter education materials and plebiscite ballots available in the official languages of Puerto Rico, which are English and Spanish.

  • Permeability test, used to measure the flow of water through the concrete.

  • Trees that are adjacent to and within the area to be graded, and the method by which trees that are to be retained will be protected.

  • Permeability test shall be mandatory for all RCC/PSC bridges under severe, very severe and extreme environment.

  • Permeability test measures the ease with which liquids, ions and gasses movement can occur by flow, diffusion, and absorption.

  • Permeability test in the Rambutan area shows low around <10mD (Sosrowidjojo, 2013).


More Definitions of Permeability test

Permeability test means a scientific procedure using lysimeters and other instrumen- tation to determine the saturated hydraulic conductivity of site specific soil horizons.
Sample 1
Permeability test means testing of the hydrocarbon losses through the walls of the non-metallic fuel storage; Added text for more clarity.
Sample 1

Related to Permeability test

  • Permeability of a space means the ratio of the volume within that space which is assumed to be occupied by water to the total volume of that space.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Collateral Quality Test means a test that is satisfied if, as of any date of determination, in the aggregate, the Collateral Loans owned (or in relation to a proposed acquisition of a Collateral Loan, both owned and proposed to be owned) by the Borrower satisfy each of the tests set forth below, calculated in each case in accordance with Section 1.3:

  • Coverage Test means each of the Class A/B Par Value Test, the Class A/B Interest Coverage Test, the Class C Par Value Test, the Class C Interest Coverage Test, the Class D Par Value Test, the Class D Interest Coverage Test, the Class E Par Value Test and the Class E Interest Coverage Test.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Collateral Quality Tests means the Collateral Quality Tests set out in the Investment Management Agreement being each of the following:

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • Quantitative fit test or "QNFT" means an assessment of the adequacy of respirator fit by numerically measuring the amount of leakage into the respirator.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Coverage Tests The Overcollateralization Ratio Test and the Interest Coverage Test, each as applied to each specified Class or Classes of Secured Debt.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Genetic test means an analysis of human DNA, RNA, chromosomes, proteins, or metabolites, that detect genotypes, mutations, or chromosomal changes. The term “genetic test” does not mean an analysis of proteins or metabolites that does not detect genotypes, mutations, or chromosomal changes; or an analysis of proteins or metabolites that is directly related to a manifested disease, disorder, or pathological condition that could reasonably be detected by a health care professional with appropriate training and expertise in the field of medicine involved.

  • Cannabis testing facility means an entity registered by

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Genetic testing means an analysis of genetic markers to exclude or identify a man as the father or a woman as the mother of a child. The term includes an analysis of one or a combination of the following:

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Treatability study means a study in which a hazardous waste is subjected to a treatment process to determine: (1) Whether the waste is amenable to the treatment process, (2) what pretreatment (if any) is required, (3) the optimal process conditions needed to achieve the desired treatment, (4) the efficiency of a treatment process for a specific waste or wastes, or (5) the characteristics and volumes of residuals from a particular treatment process. Also included in this definition for the purpose of the § 261.4 (e) and (f) exemptions are liner compatibility, corrosion, and other material compatibility studies and toxicological and health effects studies. A “treatability study” is not a means to commercially treat or dispose of hazardous waste.

  • Corrective Measure The contractor shall repair and deficiencies which do not meet the performance guideline.

  • Class C Coverage Tests means the Class C Interest Coverage Test and the Class C Par Value Test.