Metes definition

Metes means to measure and “bounds” stands for boundaries, therefore a measurement of boundaries on a parcel. This method is used to describe shapes of land other than rectangular. There are 360 degrees in a circle and there are 60 minutes in a degree and 60 seconds in every minute. Knowing the divisions will enable a person to understand metes and bounds descriptions. Using a protractor or land compass is necessary for mapping a metes and bounds description. North and south are zero degrees and east and west are 90 degrees. If the description states N 89’ E 200 feet, that dimension would be drawn using the rounded side of the protractor placed to the East. An engineer’s scale should be used to measure the distances. There are a
Sample 1Sample 2Sample 3

Examples of Metes in a sentence

  • The properties are sold based upon their LEGAL DESCRIPTION ONLY (Subdivision name and Lot number, or Metes and Bounds measured description).

  • Metes and bounds descriptions of this type of property are optional.

  • Metes and bounds description A metes and bounds description must be prepared for each parcel of land to be acquired.

  • Metes and bounds property descriptions are required; Station and Offset style property descriptions are not acceptable.

  • Metes and bounds description of the property to be subdivided shall be certified by a Registered Professional Land Surveyor, describing a beginning point and reciting bearings and distances to a corner of the original land grant survey of which the subdivision is a part, according to the best available data.

  • Submittals for Metes and Bounds Subdivisions (lot splits) shall conform to the minimum requirements of a preliminary plat if either the proposed new parcel or the remnant is less than 10 acres.

  • Metes and bounds: A point of beginning which is referenced from either a section corner or a subsection corner, such as a quarter corner.

  • Metes and bounds descriptions must include, but need not be limited to, the following items of information: • State, County, and Survey within which the proposed parcel of land to be acquired is located.

  • Gastle & Susan Boughs, Microsoft III and the Metes and Bounds of Software Design and Technological Tying Doctrine, 6 VA.

  • Metes and Bounds -- A method of property description by means of their direction and distance from an identified section survey.

Related to Metes

  • Tract means 2 or more parcels that share a common property line and are under the same ownership.

  • Parcel means an identifiable unit of land that is treated as separate for valuation or zoning purposes.

  • Survey Area means the area of land or waters the subject of a Survey, or proposed to be the subject of a Survey.

  • Boundary means any lateral or street boundary of a site;

  • Quantity Surveyor means the quantity surveyor appointed by the Seller for the purposes of the Development;

  • Professional land surveyor means a professional land surveyor licensed under ch. 443.

  • Assistant Hydrographic Surveyor means the Assistant Hydrographic Surveyor of the Authority, as the case may be

  • Surveyor means a professional surveyor licensed under article 20 of the occupational code, 1980 PA 299, MCL 339.2001 to 339.2014.

  • Land surveyor means the land surveyor appointed by the Seller, to act as such from time to time in respect of the Development or a member of a firm so appointed.

  • Flood Boundary and Floodway Map (FBFM means an official map of a community, issued by the FEMA, on which the Special Flood Hazard Areas and the floodways are delineated. This official map is a supplement to and shall be used in conjunction with the Flood Insurance Rate Map (FIRM).

  • Record of survey map means a map of a survey of land prepared in accordance with Section 10-9a-603, 17-23-17, 17-27a-603, or 57-8-13.

  • Phase I assessment as described in, and meeting the criteria of, (i) Chapter 5 of the FNMA Multifamily Guide or any successor provisions covering the same subject matter in the case of a Specially Serviced Mortgage Loan as to which the related Mortgaged Property is multifamily property or (ii) the American Society for Testing and Materials in the case of Specially Serviced Mortgage Loan as to which the related Mortgaged Property is not multifamily property.

  • Professional Engineer or Professional Certificated Engineer means a person holding registration as either a Professional Engineer or Professional Certificated Engineer in terms of the Engineering Profession Act, 2000 (Act No. 46 of 2000);

  • Lot means a parcel or a single article that is the subject matter of a separate lease or delivery, whether or not it is sufficient to perform the lease contract.

  • Survey means a survey of the Property prepared by a surveyor licensed in the State and satisfactory to Lender and the company or companies issuing the Title Insurance Policy, and containing a certification of such surveyor satisfactory to Lender.

  • Engineering Report means the Initial Engineering Report and each engineering report delivered pursuant to Section 6.2.

  • registered land means land in England or Wales, title to which is registered at H.M. Land Registry;

  • Perimeter means the fenced or walled area of the institution that restrains the movement of the inmates.

  • Landscape architect means a person who holds a license to practice landscape architecture in the state of California Business and Professions Code, Section 5615.

  • Detailed Specifications means the specifications for materials and works as specified in PWD BSR/ issued under the authority of PWD/ or as implied/added to or superseded by the special conditions.

  • Description sets out the scope of the sector, sub-sector or activities covered by the reservation; and

  • Engineering Reports has the meaning assigned such term in Section 2.07(c)(i).

  • Lots means all or any machinery and other items sold or intended to be sold in accordance with these conditions; “Purchaser” means a person, firm or Company who purchase any Lot;

  • Quality Surveillance Engineer / Inspector means any person appointed by or on behalf of the Purchaser to inspect or carry out quality surveillance on supplies, stores or work under the Contract or any person deputed by the Quality Surveillance Engineer for the said purpose.

  • Risk assessment means a programme to determine any risk associated with any hazard at a construction site, in order to identify the steps needed to be taken to remove, reduce or control such hazard;

  • Sample means urine, blood, breath, saliva, or hair.