LEED Platinum Standard definition

LEED Platinum Standard means the level of green building design achieved by meeting the Platinum level requirements of LEED, as adapted for British Columbia, established by the Canada Green Building Council incorporated by letters patent under the Canada Corporations Act effective December 5, 2002, or equivalent as determined by the City;
Sample 1Sample 2Sample 3

Examples of LEED Platinum Standard in a sentence

  • The City encourages Respondents to submit options to: • achieve higher performance green buildings comparable to a LEED Gold Standard for all buildings on the Property;• achieve a higher performance green building comparable to a LEED Platinum Standard for the Community Centre; and• further enhance the environmental, social, and economic sustainability of the Project.

  • The development will ensure green building practices are undertaken and will, at a minimum, achieve the goals of the Green Building Strategy adopted for Southeast False Creek, including a minimum LEED Silver Standard for all non-City buildings with a Council endorsed objective of LEED Gold, a minimum LEED Gold Standard for City buildings, with an additional 30% improvement in energy performance above existing City bylaws, and an attempt at LEED Platinum Standard as a demonstration for the Community Centre.

  • Further, that one building on City-owned lands, likely the Community Centre, but not necessarily, be constructed to a minimum LEED Gold Standard, with an objective of LEED Platinum Standard.

  • Further, that one building on the City Lands, likely the Community Centre, but not necessarily, be constructed to a minimum LEED Gold Standard, with an objective of LEED Platinum Standard.

  • The new school would be constructed to the LEED Platinum Standard and would include many energy saving measures resulting in a lower overall carbon footprint.

  • Services revenue increased 31% to $14.6 million from $11.1 million.

  • These guidelines require LEED Gold Standard as a minimum for this system and reaching LEED Platinum Standard is encouraged.

  • Preparing an impact analysis and implementation plan for achieving LEED Platinum Standard for Maintenance within 12 months of NDB accepting the office complex building.St 1-9.

  • A building obtaining LEED Certification as meeting the LEED Platinum Standard may be increased in height by up to four (4) stories.

  • The new school would be constructed to the LEED Platinum Standard and would include many energy saving measures resulting in reduced energy consumption and associated emissions.

Related to LEED Platinum Standard

  • Uniform standard means a standard adopted by the Commission for a Product line, pursuant to Article VII of this Compact, and shall include all of the Product requirements in aggregate; provided, that each Uniform Standard shall be construed, whether express or implied, to prohibit the use of any inconsistent, misleading or ambiguous provisions in a Product and the form of the Product made available to the public shall not be unfair, inequitable or against public policy as determined by the Commission.

  • Contract Standard means such standard as complies in each and every respect with all relevant provisions of the Contract;

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Basic Comprehensive User Guide means the Ministry document titled Basic Comprehensive Certificates of Approval (Air) User Guide” dated April 2004 as amended.

  • Categorical pretreatment standard or "categorical standard" means any regulation containing pollutant discharge limits promulgated by the environmental protection agency in accordance with sections 307(b) and (c) of the Act (33 U.S.C. section 1317) that apply to a specific category of users and that appear in 40 CFR chapter I, subchapter N, parts 405 through 471.

  • Standard operating procedure means a formal written procedure offi- cially adopted by the plant owner or operator and available on a routine basis to those persons responsible for carrying out the procedure.

  • Standard Operating Procedures or “SOP” means the procedures as specified in the Annexes or Attachments to the relevant Schedules;

  • Environmental and Social Standard 8: Cultural Heritage”; (ix) “Environmental and Social Standard 9: Financial Intermediaries”; (x) “Environmental and Social Standard 10: Stakeholder Engagement and Information Disclosure”; effective on October 1, 2018, as published by the Bank.

  • Brand Name or Equal Specification means a specification which uses one or more manufacturer’s names or catalogue numbers to describe the standard of quality, performance, and other characteristics needed to meet District requirements, and which provides for the submission of equivalent products.

  • safety standard means the Code of Practice for the Wiring of Premises SANS 10142-1 incorporated in the Regulations;

  • Quality Management System means a set of interrelated or interacting elements that organisations use to direct and control how quality policies are implemented and quality objectives are achieved;

  • Participating Prescription Drug Provider means an independent retail Pharmacy, chain of retail Pharmacies, mail-order Pharmacy or specialty drug Pharmacy which has entered into an agreement to provide pharmaceutical services to participants in the benefit program. A retail Participating Pharmacy may or may not be a select Participating Pharmacy as that term is used in the Vaccinations Obtained Through Participating Pharmacies section.

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Brand Name Specification means a specification limited to one or more items by manufacturers’ names or catalogue number.

  • Covered Building Service Contract means a contract or subcontract to provide Building Services to the City of Cambridge or any of its departments or subdivisions.

  • Environmental and Social Impact Assessment or “ESIA” means a site-specific report, to be prepared in accordance with the parameters laid down in the ESMF (as hereinafter defined) and acceptable to the Association, identifying and assessing the potential environmental and social impacts of the activities to be undertaken for the Project, evaluating alternatives, and designing appropriate mitigation, management, and monitoring measures.

  • State Standard Agreement means the form used by the State to enter into agreements with other parties. Several originally signed, fully executed versions of the State Standard Agreement, together with the integrated Contract Documents, shall each represent the Agreement as an individual “Contract Counterpart.”

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • The Specification means the Specification annexed to or issued with G.T.C.C. and shall include the schedules & drawings attached thereto as well as all samples and pattern, if any.

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • Basic health plan model plan means a health plan as required in RCW 70.47.060(2)(e).

  • Standard Agreement Coversheet refers to the form used by the Judicial Council to enter into agreements with other parties. Several originally signed, fully executed versions of the Standard Agreement, together with the integrated Contract Documents, shall each represent the Agreement as an individual contract counterpart.

  • Staff Vetting Procedure means the Authority’s procedures for the vetting of personnel and as advised to the Contractor by the Authority.

  • technical specification means, with respect to any Software, the document setting forth the technical specifications for such Software and included in the Statement of Work.

  • Community-Wide Standard means the standard of conduct, maintenance or other activity generally prevailing in the Community. Such standard may be more specifically determined by the Board of Directors of the Association. Such determination, however, must be consistent with the Community-Wide Standard originally established by the Declarant.

  • Quality system means documented organizational procedures and policies: internal audits of those policies and procedures: management review and recommendation for quality improvement.”