Leak detection definition

Leak detection means determining whether a dis- charge of regulated substance has occurred from a storage tank system into the environment or into the interstitial space between the storage tank system and its secondary barrier or secondary containment around it.
Sample 1Sample 2Sample 3
Leak detection means electronic, manual or mechanical measurement of the contents or other characteristics or parameters of an AST which notifies the Operator of the failure of an AST to contain a Regulated Substance.
Sample 1Sample 2Sample 3
Leak detection means determining whether a dis- charge of a regulated substance has occurred from a point in a stor- age tank system, that is not intended to be a discharge or dispens- ing point, such as a discharge into the interstitial space between the primary tank or piping and the secondary barrier or secondary containment around that tank or piping.
Sample 1Sample 2Sample 3

Examples of Leak detection in a sentence

  • Kinked hoses can result in restricted air flow and lead to unpredictable system behavior.• Any observed improper system or component function: Immediately shut down the system and correct malfunction.• Excessive dirt build-up: Dirt and clutter can mask potentially hazardous situations.Caution: Leak detection solutions should be rinsed off after use.

  • Leak detection system materials shall have a minimum hydraulic conductivity of 1x10-3 cm/sec.

  • Owners and operators of hazardous substance UST systems must provide leak detection that meets the following requirements: (a) Leak detection at existing UST systems must meet the requirements for petroleum UST systems in §280.41.

  • The owner or operator shall comply with this section no later than the implementation date specified in § 65.1(f).(b) Leak detection.

  • Leak detection means determining if a leak of a regulated substance has occurred from the UST system.

  • Leak detection facilities shall be installed under all new tanks.

  • Columbia added additional counter-defendants to the condemnation action through the First Amended Counterclaim in Condemnation (ECF No. 275) and Second Amended Counterclaim in Condemnation (ECF No. 287).

  • Leak detection and monitoring methods that will be utilized after in-service date.

  • Leak detection requirements added to contract.4. Allowance for utility repair included in contract.

  • Leak detection methods for tank systems shall meet the requirements of this section.


More Definitions of Leak detection

Leak detection means a detection system that performs line leak testing for underground piping connected to aboveground storage tanks.
Sample 1Sample 2

Related to Leak detection

  • Release detection means determining whether a release of a regulated substance has occurred from the UST system into the environment or into the interstitial space between the UST system and its secondary barrier or secondary containment around it.

  • Filtration means a process for removing particulate matter from water by passage through porous media.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Sedimentation means a process for removal of solids before filtration by gravity or separation.