Heat input capacity definition

Heat input capacity means the manufacturer’s or designer’s guaranteed maximum rate of heat input, whichever is greater.
Sample 1Sample 2Sample 3

Examples of Heat input capacity in a sentence

  • Heat input capacity is 24.92 million Btu/hr each and maximum steam production is 20,700 and 21,562 lb/hr, respectively.

  • Heat input capacity for each affected boiler is calculated based on 8760 hours per year.

  • Heat input capacity means the ability of a steam generating unit to combust a stated maximum amount of fuel on a steady-state basis, as determined by the physical design and characteristics of the steam generating unit.

  • For the first five (5) days where an act of God or an Employer directive forces the closing of a school or other facility of the Employer, the employees shall be excused from reporting to duty without loss of pay.

  • Heat input capacity is24.92 million Btu/hr and maximum steam production is 21,562 lb/hr.

  • Unit descriptionMax Heat input capacity (MMBtu/hr)Number of UnitsCombined Max Heat Input Capacity (MMBtu/hr)SECTION D.2 EMISSIONS UNIT OPERATION CONDITIONS Emissions Unit Description: (e) Twenty-one (21) Natural gas-fired combustion source with heat input equal to or less than ten (10) million Btu per hour: (f) Cold cleaning dip tanks throughout the source identified as Emission Unit ID Cold Cleaner.

  • Heat input capacity for each boiler is calculated based on 8760 hours per year, as indicated in the definition of “Annual capacity factor” in §63.7575 of subpart DDDDD.

  • Heat input capacity of 2.8 mmBtu / hr is equivalent to output of about 164 kW for combustion turbines and 263 kW for engine generators.

  • Heat input capacity of each dryer: 4,400,000 Btu per hour.Reason not incorporated: To maintain consistency in permit language, reporting and monitoring, a revised limiting condition will replace the previous conditions.

  • ELRi x HIRi)/ ∑iHIRiWhere: ELRi = The relevant NOx emission limit for Existing Covered Heater or Boiler “i” in lbs.-NOx per Million BTU (HHV); HIRi = Heat input capacity of Existing Covered Heater or Boiler “i” as reported in the latest annual update to the initial inventory; andn = Total number of Existing Covered Heaters and Boilers.

Related to Heat input capacity

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Excess Capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Interruptible Capacity means capacity that may be interrupted by the Operator at any time in order to fulfil shippers’ nominations under a firm capacity reservation.

  • Generation Capacity Resource shall have the meaning specified in the Reliability Assurance Agreement. Generation Interconnection Customer:

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Alternate Fuel Capability means a situation where an alternate fuel could have been utilized whether or not the facilities for such use have actually been installed; provided however, where the use of natural gas is for plant protection, feedstock or process uses and the only alternate fuel is propane or other gaseous fuel, then the Buyer will be treated as if he had no alternate fuel capability.

  • Local Capacity Area has the meaning set forth in the CAISO Tariff.

  • Base Capacity Resource means a Capacity Resource as described in Tariff, Attachment DD, section 5.5A(b).

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;