Full-Scale Test definition

Full-Scale Test means a test of a fully-assembled article.
Sample 1Sample 2

Examples of Full-Scale Test in a sentence

  • Full-Scale Test of Mercury Control with Sorbent Injection and an ESP at Wisconsin Electric’s Pleasant Prairie Power Plant,” T.

  • Investigation of Bearing Axial Cracking: Benchtop and Full-Scale Test Results (Technical Report).

  • Instrumentation and Full-Scale Test of a Post-Tensioned Concrete Bridge.

  • D’Avirro, J., Chaput, M., Dawson, P., Hanna, M., Fleming, S., Aircraft Full-Scale Test Program for the 1996/97 Winter , APS Aviation Inc.

  • Foes are indeed (dangerous) creatures, but our fear of them calls for a different response.

  • Lapse Date Exemptive ReliefThe Manager, on behalf of the Specified Funds, has been granted exemptive relief that allows for the Specified Funds to renew their prospectus filings at the same time as the other Funds.

  • F., (Delatte et al., 1996c), "Full-Scale Test of High Early Strength Bonded Concrete Overlay Designs and Construction Methods," pp.

  • Comparison of Lumbar Load Response between Forward Section Component and Full-Scale Test The Hybrid II ATD seated within 9D provides a single data point for Hybrid II/FAA Hybrid III response within the Wingbox Section of the full-scale test.

  • P-RPT-J-00009, Salt Waste Processing Facility Project Test Report: Caustic-Side Solvent Extraction Full-Scale Test, Revision 0.

  • Subject to adjustment as provided in Section 4.2, no Employee shall be granted within any fiscal year of the Company one or more Restricted Stock Awards, subject to Vesting Conditions based on the attainment of Performance Goals, for more than One Hundred Thousand (100,000) shares of Stock.

Related to Full-Scale Test

  • Commissioning test means tests applied to the Generating Facility, after completion of the construction of the Generating Facility, in order to verify that the Generating Facility may be released for Operation.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Cannabis testing facility means an entity registered by

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Plant Test Date or "PTD" means the date acceptance testing is performed with CLEC. "Point of Interface", "Point of Interconnection," or "POI" is a demarcation between the networks of two (2) LECs (including a LEC and CLEC). The POI is that point where the exchange of traffic takes place.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Genetic testing means an analysis of genetic markers to exclude or identify a man as the father or a woman as the mother of a child. The term includes an analysis of one or a combination of the following:

  • Covenant Testing Period means a period (a) commencing on the last day of the fiscal quarter of Borrower most recently ended prior to a Covenant Trigger Event for which Borrower is required to deliver to Administrative Agent quarterly or annual financial statements pursuant to Section 5.2 of this Agreement, and (b) continuing through and including the first day after such Covenant Trigger Event that Availability has equaled or exceeded the greater of (i) 10% of the Borrowing Limit, and (ii) $15,000,000 for 60 consecutive calendar days.

  • Incurrence Test means the incurrence test set out in Clause 12.1 (Incurrence Test).

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;