ASME Code A18.1 definition

ASME Code A18.1 means the American Society of Mechanical Engineers Safety Code for Platform Lifts and Stairway Chairlifts A18.1, as it existed on January 1, 2004, or any subsequent revision of that code adopted after a review by the commission, as required by law.
Sample 1Sample 2Sample 3
ASME Code A18.1 means the American Society of Mechanical Engineers Safety Code for Platform Lifts and Stairway Chairlifts A18.1.
Sample 1Sample 2Sample 3
ASME Code A18.1 means the American
Sample 1

Examples of ASME Code A18.1 in a sentence

  • The term does not include maintenance, repair, replacement, or a cosmetic change that does not affect the operational safety of the equipment or diminish the safety of the equipment below the level required by the ASME Code A17.1, ASME Code A17.3, ASME Code A18.1, or ASCE Code 21, as applicable, at the time of alteration.

  • Standards adopted under [by the] commission rules may not contain requirements in addition to the requirements in the ASME Code A17.1, ASME Code A17.3, ASME Code A18.1, or ASCE Code 21.

  • The executive director may [shall] grant a delay for compliance with the codes and adopted standards [applicable ASME Code A17.1, ASME Code A17.3, or ASME Code A18.1] until a specified time if the executive director determines that the noncompliance does not constitute a significant threat to passenger or worker safety [compliance is not readily achievable, as that phrase is defined in the Americans with Disabilities Act (42 U.S.C. Section 12101 et seq.), or regulations adopted under that Act].

  • Installation, repair, alteration, testing, and maintenance standards for contractors must be consistent with ASME Code A17.1, ASME Code A17.3, ASME Code A18.1, and ASCE Code 21.

  • The building shall not be occupied until such buildings or enclosures have been constructed.

  • The term does not include an employee of a contractor or a person engaged in cleaning or any other work performed on equipment that does not affect the operational safety of the equipment or diminish the safety of the equipment below the level required by the ASME Code A17.1, ASME Code A17.3, ASME Code A18.1, or ASCE Code 21, as applicable.

  • Standards adopted under commission rules may not contain requirements in addition to the requirements in the ASME Code A17.1, ASME Code A17.3, ASME Code A18.1, or ASCE Code 21.

  • Includes ASME Code A18.1 and ASCE Code 21 in the list of codes with which the commissioner-adopted standards, which are applicable as well as in effect, must comply in governing equipment installation.

  • Standards adopted under [by the] commission rules must require equipment to comply with the installation requirements of the ASME Code A17.1, ASME Code A18.1, or ASCE Code 21 that was in effect and applicable on the date of installation of the equipment.

  • Do the Plan Review requirements apply to the installation and alteration of (wheelchair lifts and stairway chair lifts) equipment covered by ASME Code A18.1? Yes.

Related to ASME Code A18.1

  • Executable Code means the fully compiled version of a software program that can be executed by a computer and used by an end user without further compilation.

  • JORC Code means the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves prepared by the Joint Ore Reserves Committee of the Australasian Institute of Mining and Metallurgy, Australian Institute of Geoscientists and Minerals Council of Australia, as amended;

  • Code means the Internal Revenue Code of 1986, as amended.

  • Building Code Act means the Building Code Act, 1992, S.O. 1992, c.23, as amended;

  • Waste code means the six digit code referable to a type of waste in accordance with the List of Wastes (England)Regulations 2005, or List of Wastes (Wales) Regulations 2005, as appropriate, and in relation to hazardous waste, includes the asterisk.

  • Access Code means the Railways (Access) Code 2000;

  • Uniform Network Code means the uniform network code as defined in Standard Special Condition A11(6) of National Grid’s transporters licence, as such code may be amended from time to time in accordance with the terms thereof.

  • IBC Code means Insolvency and Bankruptcy Code, 2016 as amended from time to time;

  • Access Codes means the unique codes which the Client will determine to enable his/her access to the trading platform of the Company and/or to his/her Trading Account through the Company’s electronic systems.

  • Polar Code means the International Code for ships operating in polar waters, consisting of an introduction, part I-A and part II-A and parts I-B and II-B, as adopted by resolutions MSC.385(94) and MEPC.264(68), as may be amended, provided that:.1 amendments to the environment-related provisions of the introduction and chapter 4 of part II-A of the Polar Code are adopted, brought into force and take effect in accordance with the provisions of article 16 of the present Convention concerning the amendment procedures applicable to an appendix to an annex; and.2 amendments to part II-B of the Polar Code are adopted by the Marine Environment Protection Committee in accordance with its Rules of Procedure.

  • IMDG Code means the International Maritime Dangerous Goods Code, for the implementation of Chapter VII, Part A, of the International Convention for the Safety of Life at Sea, 1974 (SOLAS Convention), published by the International Maritime Organization (IMO), London;

  • Occupational Health and Safety Act means the Occupational Health and Safety Act, 1993 (Act No 85 of 1993);

  • Railway Code Systems means necessary systems within the meaning of the Systems Code;

  • Loss Absorption Regulations means, at any time, the laws, regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities and/or loss absorbing capacity instruments of the United Kingdom, the PRA, the United Kingdom resolution authority, the Financial Stability Board and/or of the European Parliament or of the Council of the European Union then in effect in the United Kingdom including, without limitation to the generality of the foregoing, any delegated or implementing acts (such as regulatory technical standards) adopted by the European Commission and any regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities and/or loss absorbing capacity instruments adopted by the PRA and/or the United Kingdom resolution authority from time to time (whether or not such regulations, requirements, guidelines, rules, standards or policies are applied generally or specifically to the Company or to the Regulatory Group).

  • STCW Code means the Seafarers’ Training, Certification and Watchkeeping Code as adopted by resolution 2 of the 1995 Conference of Parties to the STCW Convention, in its up-to-date version;

  • CFR means the Code of Federal Regulations.

  • Cathodic protection tester means a person who can demonstrate an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping and tank systems. At a minimum, such persons must have education and experience in soil resistivity, stray current, structure-to-soil potential, and component electrical isolation measurements of buried metal piping and tank systems.

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • QR Code means a matrix barcode that links to information about a battery model;

  • Erasmus Code A unique identifier that every higher education institution that has been awarded with the Erasmus Charter for Higher Education receives. It is only applicable to higher education institutions located in Programme Countries. 5 Country code: ISO 3166-2 country codes available at: xxxxx://xxx.xxx.xxx/obp/ui/#search. 6 Any Programme Country enterprise or, more generally, any public or private organisation active in the labour market or in the fields of education, training and youth (training of staff members from Programme Country HEIs in Partner Country non-academic partners is not eligible).

  • 15(519) means the weekly statistical release designated as such, or any successor publication, published by the Board of Governors of the Federal Reserve System. The date of determination of a Make-Whole Premium will be the third Business Day prior to the applicable prepayment date and the "most recent H.15(519)" means the H.15(519) published prior to the close of business on the third Business Day prior to the applicable prepayment date.

  • FMC Act means the Financial Markets Conduct Act 2013.

  • SIC code means “Standard Industrial Classification code,” as assigned to a site by the United States Department of Transportation, Federal Highway Administration, based on the particular activities that occur on the site, as set forth in its publication “Standard Industrial Classification Manual,” incorporated by reference in Section 720.111(a).

  • POPI Act means the Protection of Personal Information Act 4 of 2013 as may be amended from time to time;

  • Chapter means a Chapter under this Part;

  • Prescription drug means any drug required by federal law or regulation to be dispensed only