Work Package Scoping and Planning Sample Clauses

Work Package Scoping and Planning. Owners • Provide all engineering and procurement information as required to support Contractor Work Package Scoping and Planning. • Provide Owners’ Issued for Construction Documents (drawings, installation specifications, ASME weld data sheets, etc.) • Provide ITAAC requirements within applicable work packages • Provide Plant Equipment and Materials to resolve material holds on work packages • Prepare ASME material requests, and ASME Material Requisitions for Plant Equipment and Materials • Provide ITP System Scoping Boundaries Contractor • Perform Work Package scoping and planning to support the Construction schedule, with support from Owner, including: - Define scope - Inclusion of design requirements and ITAAC requirements - Assemble Owners' Issued for Construction Documents (drawings, installation specifications, weld data sheets, etc.), Verification/Inspection Data Sheets, QCIs, etc., all as provided by Owners. - Evaluate status of Plant Equipment and Materials, prepare material take-offs/material requests for Plant Equipment and Materials (by initiating material reservations), close material holds on work packages, and prepare Material Requisitions for issuance by Owners to help ensure availability of material for Work Package execution. • Prepare Work Package Scoping Document, issue for field review, incorporate comments, issue final Work Package Scoping • Review Issued for Construction Documents focusing on constructability, perform constructability walk downs, resolve comments. • Evaluate status of non-permanent plant materials and, as appropriate, prepare Material Requisitions (by initiating material reservations) to help ensure availability of material for Work Package execution. CONFIDENTIAL AND PROPRIETARY AMENDMENT NO. 2 TO THE CONSTRUCTION COMPLETION AGREEMENT
AutoNDA by SimpleDocs

Related to Work Package Scoping and Planning

  • Strategic Planning The Practice Advisory Council may make recommendations to the Practice concerning development of long-term strategic planning objectives for the Practice.

  • Manufacturing and Marketing Rights The Company has not granted rights to manufacture, produce, assemble, license, market, or sell its products to any other person and is not bound by any agreement that affects the Company's exclusive right to develop, manufacture, assemble, distribute, market, or sell its products.

  • BUILDING PLANNING If Landlord requires the Premises for use by another ------------------ tenant or for other reasons connected with the Building planning program, then Landlord shall have the right, upon sixty (60) days' prior written notice to Tenant, to relocate the Premises to other space in the Building of substantially similar size as the Premises, and with tenant improvements of substantially similar age, quality and layout as then existing in the Premises. In the event of any such relocation, Landlord shall pay for the cost of providing substantially similar tenant improvements (but not any furniture or personal property), and Landlord shall reimburse Tenant, within thirty (30) days after Landlord's receipt of invoices and paid receipts, for the reasonable moving, telephone installation and stationery reprinting costs actually paid for by Tenant in connection with such relocation. If Landlord so relocates Tenant, the terms and conditions of this Lease shall remain in full force and effect and apply to the new space, except that (a) a revised Exhibit "B" shall become part ---------- of this Lease and shall reflect the location of the new space, (b) Paragraph 1 of this Lease shall be amended to include and state all correct data as to the new space, and (c) such new space shall thereafter be deemed to be the "Premises". Notwithstanding the foregoing provisions of this Paragraph 29 to the contrary, if the new space contains more Rentable Square Feet than the original Premises, Tenant shall not be obligated to pay any more Annual Basic Rent or Excess Expenses than otherwise applicable to the original Premises. Landlord and Tenant agree to cooperate fully in order to minimize the inconvenience of Tenant resulting from such relocation.

  • Scope of Cooperation 1) Party A authorizes Party B as the sole distribution agent of the “Case edition” and “Channel edition” of China Marketing and China Business and Trade in the territory of Hunan Province (not including post offices) and Party B is responsible for the distribution matter within such area. Party A will support Party B to achieve a good performance in the regional marketing and promotion and guarantee the legitimate rights and interests of Party B during the term of this agreement.

  • Transition Planning 28 4.5. Control of Other Party's Business . . . . . . . . . 28

  • Sampling and Analysis The sampling and analysis of the coal delivered hereunder shall be performed by Buyer upon delivery of the coal to Buyer’s facility, and the results thereof shall be accepted and used as defining the quality and characteristics of the coal delivered under this Agreement and as the Payment Analysis. All analyses shall be made in Buyer’s laboratory at Buyer’s expense in accordance with ASTM standards where applicable, or industry-accepted standards in other cases. Samples for analyses shall be taken in accordance with ASTM standards or other methods mutually acceptable to both parties. Seller shall transmit its “as loaded” quality analysis to Buyer as soon as possible. Seller’s “as-loaded” quality shall be the Payment Analysis only when Buyer’s sampler and/or scales are inoperable, or if Buyer fails to obtain a sample upon unloading. Seller represents that it is familiar with Buyer’s sampling and analysis practices, and that it finds them to be acceptable. Buyer shall notify Seller in writing of any significant changes in Buyer’s sampling and analysis practices. Any such changes in Buyer’s sampling and analysis practices shall, except for ASTM or industry-accepted changes in practices, provide for no less accuracy than the sampling and analysis practices existing at the tune of the execution of this Agreement, unless the Parties otherwise mutually agree. Each sample taken by Buyer shall be divided into four (4) parts and put into airtight containers, properly labeled and sealed. One (1) part shall be used for analysis by Buyer. One (1) part shall be used by Buyer as a check sample, if Buyer in its sole judgment determines it is necessary. One (1) part shall be retained by Buyer until thirty (30) days after the sample is taken (“Disposal Date”), and shall be delivered to Seller for analysis if Seller so requests before the Disposal Date. One (1) part (the “Referee Sample”) shall be retained by Buyer until the Disposal Date. Seller shall be given copies of all analyses made by Buyer by the fifth (5th) business day of the month following the month of unloading. In addition, Buyer shall send Seller weekly analyses of coal unloaded at Buyer’s facilities. XXXXXXXXX COAL COMPANY, INC. LG&E/KU Xxxxxxxx Xx. X00000 Seller, on reasonable notice to Buyer, shall have the right to have a representative present to observe the sampling and analyses performed by Buyer. Unless Seller requests an analysis of the Referee Sample before the Disposal Date, Buyer’s analysis shall be used to determine the quality of the coal delivered hereunder and shall be the Payment Analysis. The Monthly Weighted Averages of specifications referenced in §6.1 shall be based on the individual Shipment analyses. If any dispute arises with regard to the analysis of any sample before the Disposal Date for such sample, the Referee Sample retained by Buyer shall be submitted for analysis to an independent commercial testing laboratory (“Independent Lab”) mutually chosen by Buyer and Seller. For each coal quality specification in question, if the analysis of the Independent Lab differs by more than the applicable ASTM reproducibility standards, the Independent Lab results will govern, and the prior analysis shall be disregarded. All testing of the Referee Sample by the Independent Lab shall be at requestor’s expense unless the Independent Lab results differ from the original Payment Analysis for any specification by more than the applicable ASTM reproducibility standards as to that specification. In such case, the cost of the analysis made by the Independent Lab shall be borne by the party who provided the original Payment Analysis. XXXXXXXXX COAL COMPANY, INC. LG&E/KU Contract No. J12004

  • Regulatory Affairs Each Party shall advise the other Party of any regulatory action of which it is aware which would affect the Product in any country of the Territory.

  • Training and Support Distributor shall train and support its personnel or subcontractors for the satisfactory completion of its obligations under this Agreement. Supplier will assist in training by furnishing Distributor with English training literature. Supplier may, at his sole discretion, provide Distributor with his own personnel for training.

  • Labeling and Packaging BTG shall label and package the Bulk Product in accordance with Legal Requirements applicable to pharmaceutical products shipped in bulk for further processing, labeling, or repackaging.

  • Research Analyst Independence The Company acknowledges that the Underwriters’ research analysts and research departments are required to be independent from their respective investment banking divisions and are subject to certain regulations and internal policies, and that such Underwriters’ research analysts may hold views and make statements or investment recommendations and/or publish research reports with respect to the Company and/or the offering that differ from the views of their respective investment banking divisions. The Company hereby waives and releases, to the fullest extent permitted by law, any claims that the Company may have against the Underwriters with respect to any conflict of interest that may arise from the fact that the views expressed by their independent research analysts and research departments may be different from or inconsistent with the views or advice communicated to the Company by such Underwriters’ investment banking divisions. The Company acknowledges that each of the Underwriters is a full service securities firm and as such from time to time, subject to applicable securities laws, may effect transactions for its own account or the account of its customers and hold long or short positions in debt or equity securities of the companies that may be the subject of the transactions contemplated by this Agreement.

Time is Money Join Law Insider Premium to draft better contracts faster.