Registered Foreign Professional Engineer (RFPE Sample Clauses

Registered Foreign Professional Engineer (RFPE refers to an ASEAN Chartered Professional Engineer (ACPE) who has successfully applied to and is authorised by the Professional Regulatory Authority (PRA) of a Host Country to work, not in independent practice, but in collaboration with one or more Professional Engineer of the Host Country.
AutoNDA by SimpleDocs

Related to Registered Foreign Professional Engineer (RFPE

  • Professional Engineering and Architect’s Services Professional Engineering and Architect’s Services are not permitted to be provided under this Agreement. Texas statutes prohibit the procurement of Professional Engineering and Architect’s Services through a cooperative agreement.

  • Design Professional The architect or engineer or architectural or engineering firm selected by Owner (i) for the design and preparation of Contract Documents governing the construction of a Project, or (ii) for construction contract administration under the Contract Documents, or (iii) for both, all such services and the scope thereof to be set forth in the Design Professional Contract. The Design Professional is not an employee of the Owner but is engaged or retained by it for the purpose of performing design and construction administration services for the project. The term “Design Professional” includes architects, engineers, surveyors, designers, and other consultants retained by the Design Professional.

  • Contractor Certification regarding Boycotting Israel Pursuant to Chapter 2270, Texas Government Code, Contractor certifies Contractor (1) does not currently boycott Israel; and (2) will not boycott Israel during the Term of this Agreement. Contractor acknowledges this Agreement may be terminated and payment withheld if this certification is inaccurate.

  • REQUIRED FOR PART 2 JOC - PRICING OF Regular Hours Coefficient What is your regular hours coefficient for the RS Means Price Book? (FAILURE TO RESPOND PROHIBITS PART 2 JOC EVALUATION) Remember that this is a ceiling price proposed. You can discount lower than your proposed contract coefficient, but not higher. This is one of three pricing questions that are required for consideration for award on this solicitation. Please consider your answer carefully. An explanation of the TIPS scoring of pricing is included in the attachments for your information. The below is an Example of how pricing model works (not intended to influence your proposed coefficient, you should propose a coefficient that you determine is right for your business): To propose the exact pricing as the RS Means Unit Price Book, you would insert a 1.0 and to propose a 5% discount for the RS Means Price Book would be a .95 regular hours coefficient and so on.

  • PROFESSIONAL DEVELOPMENT AND EDUCATIONAL IMPROVEMENT A. The Board agrees to implement the following:

  • Certification of Meeting or Exceeding Tobacco-Free Workplace Policy Minimum Standards A. Grantee certifies that it has adopted and enforces a Tobacco-Free Workplace Policy that meets or exceeds all of the following minimum standards of:

  • Design Professional Contract The Contract between the Owner and the Design Professional for the design of the Project.

  • Nurse Practitioner (Employer Appointed Position) “Nurse Practitioner” means a Registered Nurse appointed as such to a position approved by the employer and who is authorised by the Board under Section 95 of Health Practitioner Regulation National Law (NSW) No 86A. A Nurse Practitioner will have at least three years full-time equivalent experience in an advanced practice role and meets the national competency standards for Nurse Practitioners. A Nurse Practitioner functions autonomously and operates at a level of nursing that uses extended and expanded skills, experience and knowledge assessment, planning, implementation, diagnosis and evaluation of nursing care. A.5.1

  • Dentist a duly licensed Dentist legally entitled to practice dentistry at the time and in the state or jurisdiction in which services are performed.

  • Required Forms If subcontractors are used under the contract that has no stated HUB goal, Exhibits H-1, H-2, H-4 and H-6 are required. Exhibits H-1 and H-6 are required if no subcontractors are being used to perform work under this contract. State of Texas HUB Subcontracting Plan Prime Contractor Progress Assessment Report (Exhibit H-6) is required monthly even when no subcontracting activity has occurred. In addition, State of Texas HUB Subcontracting Plan Prime Contractor Progress Assessment Report (Exhibit H-6) should be submitted with the Provider’s invoice. EXHIBIT H-1 Texas Department of Transportation Subprovider Monitoring System Commitment Worksheet Contract #: Assigned Goal: % Federally Funded State Funded Prime Provider: Total Contract Amount: Prime Provider Info: DBE HUB Both Vendor ID #: DBE/HUB Expiration Date: (First 11 Digits Only) If no subproviders are used on this contract, please indicate by placing “N/A” on the 1st line under Subproviders. Subprovider(s) (List All) Type of Work Vendor ID # (First 11 Digits Only) D=DBE H=HUB Expiration Date $ Amount or % of Work * Subprovider(s) Contract or % of Work* Totals *For Work Authorization Contracts, indicate the % of work to be performed by each subprovider. Total DBE or HUB Commitment Dollars $ Total DBE or HUB Commitment Percentages of Contract % (Commitment Dollars and Percentages are for Subproviders only) EXHIBIT H-2 Texas Department of Transportation Subprovider Monitoring System Commitment Agreement This commitment agreement is subject to the award and receipt of a signed contract from the Texas Department of Transportation (TxDOT). NOTE: Exhibit H-2 is required to be attached to each contract that does not include work authorizations. Exhibit H-2 is required to be attached with each work authorization. Exhibit H-2 is also required to be attached to each supplemental work authorization. If DBE/HUB Subproviders are used, the form must be completed and signed. If no DBE/HUB Subproviders are used, indicate with “N/A” on this line: and attach with the work authorization or supplemental work authorization. Contract #: Assigned Goal: % Prime Provider: Work Authorization (WA)#: WA Amount: Date: Supplemental Work Authorization (SWA) #: to WA #: SWA Amount: Revised WA Amount: Description of Work (List by category of work or task description. Attach additional pages, if necessary.) Dollar Amount (For each category of work or task description shown.) Total Commitment Amount (Including all additional pages.) $ IMPORTANT: The signatures of the prime and the DBE/HUB and Second Tier Subprovider, if any (both DBE and Non-DBE) and the total commitment amount must always be on the same page. Provider Name: Name: (Please Print) Title: Signature Date Address: Phone # & Fax #: Email: DBE/HUB Sub Provider Name: (Please Print) Title: Signature Date Subprovider Name: VID Number: Address: Phone # & Fax #: Email: Second Tier Sub Provider: Name: (Please Print) Title: Signature Date Subprovider Name: VID Number: Address: Phone #& Fax #: Email: VID Number is the Vendor Identification Number issued by the Comptroller. If a firm does not have a VID Number, please enter the owner’s Social Security or their Federal Employee Identification Number (if incorporated). Contract No. EXHIBIT H-3 Texas Department of Transportation Subprovider Monitoring System for Federally Funded Contracts Progress Assessment Report for month of (Mo./Yr.) / Contract #: Original Contract Amount: Date of Execution: Approved Supplemental Agreements: Prime Provider: Total Contract Amount: Work Authorization No. Work Authorization Amount: If no subproviders are used on this contract, please indicate by placing “N/A” on the 1st line under Subproviders. DBE All Subproviders Category of Work Total Subprovider Amount % Total Contract Amount Amount Paid This Period Amount Paid To Date Subcontract Balance Remaining Fill out Progress Assessment Report with each estimate/invoice submitted, for all subcontracts, and forward as follows: 1 Copy with Invoice - Contract Manager/Managing Office 1 Copy – TxDOT, BOP Office, 120 X. 00xx, Xxxxxx, XX 00000, 000-000-0000, toll free 000-000-0000, or Fax to 000-000-0000 I hereby certify that the above is a true and correct statement of the amounts paid to the firms listed above. Print Name - Company Official /DBE Liaison Officer Signature Phone Date Email Fax Contract No. EXHIBIT H-4 Texas Department of Transportation Subprovider Monitoring System Final Report The Final Report Form should be filled out by the Prime Provider and submitted to the Contract Manager and the Business Opportunity Programs Office for review upon completion of the contract. The report should reflect all subcontract activity on the project. The report will aid in expediting the final estimate for payment. If the HUB or DBE goal requirements were not met, documentation supporting good faith efforts must be submitted. DBE Goal: % OR HUB Goal: % Total Contract Amount: $ Contract Number: Total Contract Amount: $ Vendor ID # Subprovider Total $ Amt Paid to Date TOTAL This is to certify that % of the work was completed by the HUB or DBE subproviders as stated above. By: Prime Provider Per: Signature Subscribed and sworn to before me, this day of , 20 Notary Public County My Commission expires: 12/06 DBE-H4.A Contract No. EXHIBIT H-5 Federal Subprovider and Supplier Information The Provider shall indicate below the name, address and phone number of all successful and unsuccessful subproviders and/or suppliers that provided proposals/quotes for this contract prior to execution. You may reproduce this form if additional space is needed. Name Address Phone Number The information must be provided and returned with the contract. Signature Date Printed Name Email Phone # Contract No. HUB Subcontracting Plan (HSP) Prime Contractor Progress Assessment Report This form must be completed and submitted to the contracting agency each month to document compliance with your HSP. Contract/Requisition Number: Contracting Agency/University Name: Contractor (Company) Name: Point of Contact: Date of Award: Object Code: (mm/dd/yyyy) State of Texas VID #: Phone #: (Agency Use Only) Reporting (Month) Period: Total Amount Paid this Reporting Period to Contractor: $ - Report HUB and Non-HUB subcontractor information *Texas Certified Total Contract $ Total $ Amount Paid Total Contract $ Subcontractor’s VID or HUB HUB? Amount from HSP This Reporting Period to Amount Paid to Date Object Code Subcontractor’s Name Certificate Number (Yes or No) with Subcontractor Subcontractor to Subcontractor (Agency Use Only) $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ TOTALS: $ - $ - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - Signature: Title: Date: *Note: Prime contractors can verify subcontractor HUB certification status on-line at xxxx://xxx0.xxxx.xxxxx.xx.xx/cmbl/cmblhub.html HSP-PAR Rev. 9/05

Time is Money Join Law Insider Premium to draft better contracts faster.