Limited Issues Sample Clauses

Limited Issues. The arbitration shall be limited to the question(s) at issue. The arbitrators shall render their decision, upon the concurrence of two (2) of their number, within ten (10) days after the appointment of the last appointed arbitrator or substitute arbitrator. The arbitrators shall meet on all business days until they reach a decision. Such decision shall be in writing and counterpart copies thereof shall be delivered to each of the parties, who agree to abide thereby and any judgment may be entered thereon in any court of competent jurisdiction and may be enforced in accordance with the laws of the State of New York. In rendering such decision, the arbitrators shall not add to, subtract from or otherwise modify the provisions of this Agreement. The foregoing, however, shall not prevent the arbitrators from determining the applicable provisions of this Agreement, the Development Leases or the Financing Leases and interpreting and construing such provisions. The arbitration conducted pursuant to this Article 12 shall be deemed binding arbitration under the laws of the State of New York.
AutoNDA by SimpleDocs

Related to Limited Issues

  • Limited International Bidding Goods which the Association agrees can only be purchased from a limited number of suppliers may be procured under contracts awarded on the basis of Limited International Bidding.

  • Limited Agency (a) If the Access Holder is not also the Operator for a Path Usage, the Access Holder appoints each nominated Operator, as its agent for the following purposes:

  • IMPORTANT NOTICE 为了保护甲方的自身权益,银行特此向甲方作出如下提示和建议: In order to protect Party A’s rights and interests, the Bank kindly reminds that:

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • Procedure for resolving issues As soon as possible after an issue has been reported, the Employer’s Site Safety Supervisor or another management representative and the Health and Safety Representative must meet and try to resolve the issue. The resolution of the relevant issue must take into account any of the following factors that may be relevant-

  • CFR PART 200 Procurement of Recovered Materials A non-Federal entity that is a state agency or agency of a political subdivision of a state and its contractors must comply with section 6002 of the Solid Waste Disposal Act, as amended by the Resource Conservation and Recovery Act. The requirements of Section 6002 include procuring only items designated in guidelines of the Environmental Protection Agency (EPA) at 40 CFR part 247 that contain the highest percentage of recovered materials practicable, consistent with maintaining a satisfactory level of competition, where the purchase price of the item exceeds $10,000 or the value of the quantity acquired during the preceding fiscal year exceeded $10,000; procuring solid waste management services in a manner that maximizes energy and resource recovery; and establishing an affirmative procurement program for procurement of recovered materials identified in the EPA guidelines. Does vendor certify that it is in compliance with the Solid Waste Disposal Act as described above? Yes

  • IMPORTANT NOTICES Privacy Act Notice. The Privacy Act of 1974 (5 U.S.C. 552a) requires that the following notice be provided to you: The authorities for collecting the requested information from and about you are §421 et seq. and §451 et seq. of the Higher Education Act of 1965, as amended (20 U.S.C. 1071 et seq. and 20 U.S.C. 1087a et seq.), and the authorities for collecting and using your Social Security Number (SSN) are §§428B(f) and 484(a)(4) of the Higher Education Act (20 U.S.C. 1078-2(f) and 1091(a)(4)) and 31 U.S.C. 7701(b). Participating in the Federal Family Education Loan (FFEL) Program or the Xxxxxxx X. Xxxx Federal Direct Loan (Direct Loan) Program and giving us your SSN are voluntary, but you must provide the requested information, including your SSN, to participate. The principal purposes for collecting the information on this form, including your SSN, are to verify your identity, to determine your eligibility to receive a loan or a benefit on a loan (such as a deferment, forbearance, discharge, or forgiveness) under the FFEL and/or Direct Loan Programs, to permit the servicing of your loan(s), and, if it becomes necessary, to locate you and to collect and report on your loan(s) if your loan(s) becomes delinquent or defaults. We also use your SSN as an account identifier and to permit you to access your account information electronically. The information in your file may be disclosed, on a case-by-case basis or under a computer matching program, to third parties as authorized under routine uses in the appropriate systems of records notices. The routine uses of this information include, but are not limited to, its disclosure to federal, state, or local agencies, to private parties such as relatives, present and former employers, business and personal associates, to consumer reporting agencies, to financial and educational institutions, and to guaranty agencies in order to verify your identity, to determine your eligibility to receive a loan or a benefit on a loan, to permit the servicing or collection of your loan(s), to enforce the terms of the loan(s), to investigate possible fraud and to verify compliance with federal student financial aid program regulations, or to locate you if you become delinquent in your loan payments or if you default. To provide default rate calculations, disclosures may be made to guaranty agencies, to financial and educational institutions, or to state agencies. To provide financial aid history information, disclosures may be made to educational institutions. To assist program administrators with tracking refunds and cancellations, disclosures may be made to guaranty agencies, to financial and educational institutions, or to federal or state agencies. To provide a standardized method for educational institutions to efficiently submit student enrollment statuses, disclosures may be made to guaranty agencies or to financial and educational institutions. To counsel you in repayment efforts, disclosures may be made to guaranty agencies, to financial and educational institutions, or to federal, state, or local agencies. In the event of litigation, we may send records to the Department of Justice, a court, adjudicative body, counsel, party, or witness if the disclosure is relevant and necessary to the litigation. If this information, either alone or with other information, indicates a potential violation of law, we may send it to the appropriate authority for action. We may send information to members of Congress if you ask them to help you with federal student aid questions. In circumstances involving employment complaints, grievances, or disciplinary actions, we may disclose relevant records to adjudicate or investigate the issues. If provided for by a collective bargaining agreement, we may disclose records to a labor organization recognized under 5 U.S.C. Chapter 71. Disclosures may be made to our contractors for the purpose of performing any programmatic function that requires disclosure of records. Before making any such disclosure, we will require the contractor to maintain Privacy Act safeguards. Disclosures may also be made to qualified researchers under Privacy Act safeguards.

  • Limited Disclosure Enanta and Xxxxxx each agrees (a) that disclosure of its Confidential Information or any transfer of its Proprietary Materials may be made by the other Party to any employee, consultant, director or Affiliate of such other Party to enable such other Party to exercise its rights or to carry out its responsibilities under this Agreement; provided that any such disclosure or transfer shall only be made to Persons who are bound by written obligations as described in Section 7.1.3, and (b) disclosure of its Confidential Information may be made by the other Party (1) on a need-to-know basis to such other Party’s legal and financial advisors, or (ii) as reasonably necessary in connection with an actual or potential (A) permitted sublicense of such other Party’s rights hereunder, (B) debt or equity financing of such other Party or (C) Change of Control involving such other Party, provided, in any case, the Person receiving such Confidential Information of the other Party agrees in writing to maintain the confidentiality of such Confidential Information of the other Party with terms at least as restrictive as those contained in Section 7.1.1. In addition, each Party agrees that the other Party may disclose such Party’s Confidential Information (a) as reasonably necessary to file, prosecute or maintain Patent Rights, or to file, prosecute or defend litigation related to Patent Rights, in accordance with this Agreement or (b) as required by Applicable Laws; provided that, in the case of any disclosure under this clause (b), the Disclosing Party shall (i) provide the other Party with written notice not less than five (5) business days prior to such disclosure and provide the other Party with an opportunity to comment on any such required disclosure, (ii) if requested by such other Party, seek, or cooperate in all reasonable respects with such other Party’s efforts to obtain, confidential treatment or a protective order with respect to any such disclosure to the extent available at such other Party’s expense, and (iii) use good faith efforts to incorporate the comments of such other Party in any such disclosure or request for confidential treatment or protective order.

  • Can I Revoke My Account? This account may be revoked any time within seven calendar days after it is established by mailing or delivering a written request for revocation to: Xxxxxxxx Funds, c/o U.S. Bank Global Fund Services, P.O. Box 701, Milwaukee, Wisconsin 53201-0701. If the revocation is mailed, the date of the postmark (or the date of certification if sent by certified or registered mail) will be considered the revocation date. Upon proper revocation, a full refund of the initial contribution will be issued, without any adjustments for items such as administrative fees or fluctuations in market value. You may always redeem your account after this time, but the amounts distributed to you will be subject to the tax rules applicable upon distribution from a tax deferred account as discussed later and the redemption amount will be subject to market fluctuations. (While current regulations technically only extend the right to redeem a Traditional IRA, it has been assumed that the right applies to all Xxxx IRAs and Xxxxxxxxx Education Savings Accounts. These accounts will be administered consistently with that interpretation until the IRS issues guidance to the contrary.)

Time is Money Join Law Insider Premium to draft better contracts faster.