Bulk/Packed Bitumen Clause Samples

The 'Bulk / Packed Bitumen' clause defines the terms and conditions under which bitumen is supplied, specifying whether it is delivered in bulk form or in pre-packed containers. This clause typically outlines the packaging requirements, handling procedures, and responsibilities for loading, unloading, and transportation depending on the form of bitumen. By clarifying these details, the clause ensures both parties understand their obligations and helps prevent disputes related to delivery methods, packaging standards, and associated logistics.
POPULAR SAMPLE Copied 1 times
Bulk/Packed Bitumen. (1) 60/70, grade bit6umen as specified in respective items shall be used. (2) Bitumen brought on site confirm to the requirement of the pertinent grade in I.S. 73 - 1992. (With latest Amendments) (3) Testing has to be arranged by the contractor from recognised laboratory at his own cost for all tests mentioned in I.S. 73 - 1992. (With latest Amendments) (4) The material brought by the agency will be open to check by Executive Engineer or his representative at all times. The agency should draw the D.D. on the refinery on account of Executive Engineer. He should submit bill from the refinery itself only. No. other bill than refinery unit will be accepted by department and no claim of contractor will be admissible. For other activities, like storage, weighments, specification number RD 42, Page 216 referred. Contractor has to arrange static tanks for storage of bulk bitumen. If it is decided to procure bulk bitumen contractor shall intimate Engineer in charge well in advance. Consignment will not be allowed to unload until its weight is checked on Weigh Bridge by department persons. Bitumen shall be procured from Govt. Refinery only.
View SourceView Similar (2)
Bulk/Packed Bitumen i) Only VG 30 (60/70) grade bitumen shall be used. ii) Bitumen brought on site shall conform to I.S.73 of latest edition iii) Testing has to be arranged by contractor from recognized Govt. laboratory at his own cost for all tests mentioned in IS-73 of latest edition IV A) The Contractor shall use Bulk Bitumen obtained from any Government Refinery only.
View SourceView Similar (2)
Bulk/Packed Bitumen i) Only 60/70 grade bitumen as specified in respective items shall be used. ii) Bitumen brought on site shall conform to the requirement of the particular grade in I.S. 73-1992. iii) Testing has to be arranged by contractor from recognized Govt. laboratory at his own cost for all tests mentioned in IS-73-1992. iv) The material brought by agency will be open to check by Executive Engineer or his representative at all time. He should submit ▇▇▇▇ from refinery itself only. No other ▇▇▇▇ than refinery's unit will be accepted by department and no claim of contractor will be admissible. For other activities storage weighments specification No. Rd. 42 Pg. 216 of Standard Specification of P.W.D. will be referred Contractor has to arrange own static tank for storage of bulk bitumen. If it is decided to procure bulk bitumen contractor shall intimate Engineer-in-Charge well in advance. Consignment will not be allowed to unload until it's weight is checked on weight bridge by Departmental persons. Bitumen shall be procured from Govt. Refinery only.
View Source
Bulk/Packed Bitumen. Only 60/70 grade bitumen as specified in respective items shall be used.
View Source

Related to Bulk/Packed Bitumen

  • RE-WEIGHING PRODUCT Deliveries are subject to re- weighing at the point of destination by the Authorized User. If shrinkage occurs which exceeds that normally allowable in the trade, the Authorized User shall have the option to require delivery of the difference in quantity or to reduce the payment accordingly. Such option shall be exercised in writing by the Authorized User.

  • Product NYISO will provide Energy Resource Interconnection Service and Capacity Resource Interconnection Service to Developer at the Point of Interconnection.

  • Raw Materials A. Catalent shall procure Raw Materials only from vendors that are approved in writing by Palatin or otherwise qualified in accordance with the provisions of the Quality Agreement. Catalent shall be responsible for procuring Raw Materials as necessary to meet the Firm Commitment. Catalent shall not be liable for any delay in delivery of Product if (i) Catalent is unable to obtain, in a timely manner, a particular Raw Material necessary for Processing and (ii) Catalent placed orders for such Raw Materials promptly following receipt of Palatin’s Firm Commitment. In the event that any Raw Material becomes subject to purchase lead time beyond the Firm Commitment time frame, the parties will negotiate in good faith an appropriate amendment to this Agreement, including Clause 4.2. B. In certain instances, Palatin may require a specific supplier, manufacturer or vendor (“Vendor”) to be used for Raw Material. In such an event, (i) such Vendor will be identified in the Specifications and (ii) the Raw Materials from such Vendor shall be deemed Palatin-supplied Materials for purposes of this Agreement. If the cost of the Raw Material from any such Vendor (other than a Vendor specified in the Specifications as of the Effective Date) is greater than Catalent’s costs for the same raw material of equal quality from other vendors, Catalent shall add the difference between Catalent’s cost of the Raw Material and the Vendor’s cost of the Raw Material to the Unit Pricing. Palatin will be responsible for all reasonable, out-of-pocket costs incurred by Catalent associated with qualification of any such Vendor who has not been previously qualified by Catalent. C. In the event of (i) a Specification change for any reason, (ii) obsolescence of any Raw Material or (iii) termination or expiry of this Agreement, Palatin shall bear the cost of any unused Raw Materials (including packaging), so long as Catalent (a) purchased such Raw Materials in quantities consistent with Palatin’s then current Firm Commitment and any minimum purchase obligations required by the vendor and (b) used commercially reasonable efforts to mitigate such costs by using any such unused Raw Materials in the manufacture of other products.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Fabrication Making up data or results and recording or reporting them.