Signalling Point Code definition

Signalling Point Code means a unique identification assigned to the exchange used for the routing of Messages as described in ITU-T Q.704;
Sample 1Sample 2Sample 3
Signalling Point Code means a Network Code adopted or otherwise used in Public Communications Networks using SS7 /C7 that identifies the originating or terminating node of each SS7 /C7 message.”
Sample 1Sample 2Sample 3
Signalling Point Code means a code used in the networks to identify the national and international exchanges or switching points between which a speech path connection is to be established;
Sample 1Sample 2

Examples of Signalling Point Code in a sentence

  • The length of the National Signalling Point Code shall be 14 bits and shall be divided into two parts of 7 bit each.

  • The length of the International Signalling Point Code shall be 14 bits and shall be divided into three parts of 3, 8 and 3 bit length, respectively, as show in the Figure 7 below.

  • National Signalling Point Code (NSPC) shall identify a signalling point in the national signalling network operating in compliance with the ITU-T No.7 signalling system.

  • Within the International Signalling System No. 7 network, a signalling point is identified by an International Signalling Point Code (ISPC) while within the National signalling system No.7 network, a signalling point is identified by a National Signalling Point Code (NSPC).

  • International Signalling Point Code shall be used for identifying the international signalling points in the international signalling networks operating with ITU-T No.7 signalling system.

  • For further information see the definition for the Signalling Point Code (SPC) below.

  • The National Signalling Point Code structure shall be in compliance with the form of International Signalling Point Code in the ITU-T Recommendation Q.704.

  • The International Signalling Point Code structure shall be in compliance with the form of the International Signalling Point Code in the ITU-T Recommendation Q.708.

  • Signalling Point Code: An identity given to a node in the CCSS No 7 signalling that either originates, receives or transfers signalling messages National Numbering Plan (NNP): a plan that specifies the format and structure of the numbers used in identifying devices or subscribers connected to a network, which in turn can also be used for routing and call charging.

  • Maximum time period for acceptance testing - After the seeker has established initial POI E1s for starting interconnection or in case of offer of new POI due to change in MSC Signalling Point Code or Location of POI, acceptance testing can be initiated as per mutually agreed process for call scenario testing, CDR verification and clearance from Revenue assurance teams of either sides.


More Definitions of Signalling Point Code

Signalling Point Code means a Network Code Adopted or otherwise used in Public Communications Networks using C7 that identifies the originating or terminating node of each C7 message. A node may have more than one Signalling Point Code Allocated to enable the node to be partitioned into logically separate entities to identify various functions;
Sample 1

Related to Signalling Point Code

  • Service Switching Point (SSP means the telephone Central Office Switch equipped with a Signaling System 7 (SS7) interface.

  • Public safety answering point (PSAP) means a 24-hour, state, local, or contracted communications facility, which has been designated by the local service board to receive 911 service calls and dispatch emergency response services in accordance with the E911 service plan.

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Network plan means a policy of group health insurance offered by an insurer under which the financing and delivery of medical care, including items and services paid for as medical care, are provided, in whole or in part, through a defined set of providers under contract with the insurer. The term does not include an arrangement for the financing of premiums.

  • border crossing point means any crossing-point authorised by the competent authorities for the crossing of external borders;

  • Genetic resources means genetic material of actual or potential value;

  • Enrollee point-of-service cost-sharing means amounts paid to

  • Rechargeable Electrical Energy Storage System (REESS) means the rechargeable energy storage system that provides electric energy for electrical propulsion.

  • PNode has the meaning set forth in the CAISO Tariff.

  • Database Management System (DBMS) A system of manual procedures and computer programs used to create, store and update the data required to provide Selective Routing and/or Automatic Location Identification for 911 systems. Day: A calendar day unless otherwise specified. Dedicated Transport: UNE transmission path between one of CenturyLink’s Wire Centers or switches and another of CenturyLink’s Wire Centers or switches within the same LATA and State that are dedicated to a particular customer or carrier. Default: A Party’s violation of any material term or condition of the Agreement, or refusal or failure in any material respect to properly perform its obligations under this Agreement, including the failure to make any undisputed payment when due. A Party shall also be deemed in Default upon such Party’s insolvency or the initiation of bankruptcy or receivership proceedings by or against the Party or the failure to obtain or maintain any certification(s) or authorization(s) from the Commission which are necessary or appropriate for a Party to exchange traffic or order any service, facility or arrangement under this Agreement, or notice from the Party that it has ceased doing business in this State or receipt of publicly available information that signifies the Party is no longer doing business in this State.

  • Meet-Point Billing (MPB) refers to the billing associated with interconnection of facilities between two or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-xxxx environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Air-to-ground radiotelephone service means a radio service, as that term is defined in 47 CFR 22.99, in which common carriers are authorized to offer and provide radio telecommunications service for hire to subscribers in aircraft.

  • Metering Point means, for meters that do not use instrument transformers, the point at which the billing meter is connected. For meters that use instrument transformers, the point at which the instrument transformers are connected.

  • Radio frequency identification (RFID means an automatic identification and data capture technology comprising one or more reader/interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers.

  • Node means an area designated by the State Planning Commission concentrating facilities and activities which are not organized in a compact form.

  • Network pharmacy means any pharmacy that has an agreement to accept our pharmacy allowance for prescription drugs and diabetic equipment/supplies covered under this agreement. All other pharmacies are NON-NETWORK PHARMACIES. The one exception and for the purpose of specialty Prescription Drugs, only specialty pharmacies that have an agreement to accept our pharmacy allowance are network pharmacies and all others pharmacies are non-network pharmacies.

  • Terminals means the Terminals set forth on Schedule A attached hereto.

  • BT Network means the communications network owned or leased by BT and used to provide the Service.

  • SPID is the number that identifies a service provider to the relevant NPAC. The SPID may be a state-specific number. "Serving Wire Center" denotes the CenturyLink building from which dial tone for local Exchange Service would normally be provided to a particular End User Customer premises. "Signaling System 7" or "SS7" is an out-of-band signaling protocol consisting of four basic sub- protocols:

  • point of metering means the point at which the customer’s consumption of electricity is metered and which may be at the point of supply or at any other point on the distribution system of the municipality or the electrical installation of the customer, as specified by the municipality; provided that it shall meter all of, and only, the customer’s consumption of electricity;

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • SMS means short message service provided by your mobile service provider which:

  • Channel migration zone (CMZ) means the area where the active channel of a stream is prone to move and this results in a potential near-term loss of riparian function and associated habitat adjacent to the stream, except as modified by a permanent levee or dike. For this purpose, near-term means the time scale required to grow a mature forest. (See board manual section 2 for descriptions and illustrations of CMZs and delineation guidelines.)

  • Network Interface Device or "NID" is a Network Element (including all of its features, functions and capabilities) that includes any means of Interconnection of End User Customer premises wiring to Qwest's distribution plant, such as a cross connect device used for that purpose. "New Service Provider" means the Party to which an End User Customer switches its local Exchange Service or the Party to which an End User Customer is porting its telephone number(s).

  • IntraLATA LEC Toll means IntraLATA Toll traffic carried solely by a Local Exchange Carrier and not by an IXC. "IntraLATA Toll Traffic" describes IntraLATA Traffic outside the Local Calling Area.