Pot gear definition

Pot gear means a portable struc- ture designed and constructed to cap- ture and retain fish alive in the water. This gear type includes longline pot and pot-and-line gear. Each groundfish pot must comply with the following:
Pot gear means a portablestructure designed and constructed to capture and retain fish alive in thewater. This gear type includes longline pot and pot-and-line gear. Eachgroundfish pot must comply with the following:

Examples of Pot gear in a sentence

  • For Puget Sound shrimp - Pot gear: All buyers of shrimp taken by pot gear (including fishers who buy their own catch) are no longer required to report the previous week's purchases by phone or FAX.

  • Date (mm/dd), time (in military format, A.l.t.), and end position coordinates (in latitude and longitude to the nearest minute; indicate E or W for longitude) where the jig or troll gear leaves the water.(3) Pot gear end position.

  • Pot gear is required to have an escape mechanism as provided for in WAC 220-52-035.

  • For Pot gear the minimum threshold of 15% coverage appears insufficient to achieve a 50% probability of observing at least three observed trips in areas of the Aleutian Islands, but is sufficient for three of four to six areas in the Bering Sea, and all areas in the Gulf of Alaska in years prior to 2017.

  • Pot gear catcher vessels greater than or equal to 60 feet LOA are allocated 8.4 percent of available non-CDQ BSAI TAC, hook-and-line and pot gear catcher vessel less than 60 feet are allocated 2 percent, hook-and-line catcher vessels greater than or equal to 60 feet are allocated 0.2 percent, and jig gear vessels are allocated 1.4 percent.

  • Pot gear is still the dominant gear during the state-waters season in CI, longline is not a legal gear type for this fishery, and longline gear is dominant during the parallel fishery.

  • Pot gear vessels take approximately 75% of the total Pacific cod catch annually.

  • Scrapbook - Establishment of Downtown Presbyterian Church, 19552.

  • Pot gear recovery operations under this section may only be performed during a closed season and may not be conducted by or for any vessel or person that, at the time of pot gear recovery operations, is registered for any pot fishery in Registration Areas O, Q, or T.

  • Pot gear is used for targeting sablefish, thornyheads, and rockfish.

Related to Pot gear

  • Landing Gear means the installed main and nose landing gear, components and their associated actuators, side braces and parts.

  • Propeller means for a device for propelling an aircraft that has blades on a powerplant driven shaft and that, when rotated, produces by its action on the air, a thrust approximately perpendicular to its plane of rotation and it includes control components normally supplied by its manufacturer, but does not include main and auxiliary rotors or rotating airfoils of powerplants;

  • Fishing gear means any item or piece of equipment that is used in fishing or aquaculture to target, capture or rear marine biological resources or that is floating on the sea surface, and is deployed with the objective of attracting and capturing or of rearing such marine biological resources;

  • Sub-meter means a metering point for electricity consumption that does not include all electricity consumption for the end-use customer as defined by the electric distribution company account number. PJM shall only accept sub-meter load data from end-use customers for measurement and verification of Regulation service as set forth in the Economic Load Response rules and PJM Manuals.

  • Dual-Fuel Engine means an engine that is designed to simultaneously operate with a liquid fuel and a gaseous fuel, both fuels being metered separately, the consumed amount of one of the fuels relative to the other one being able to vary depending on the operation;

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Master Meter means the meter controlled by the licensed distributor and used for settlement of the master bill with the master consumer;

  • Cold Weather Alert means the notice that PJM provides to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for expected extreme cold weather conditions.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Engine under the Lease. The term "Engines" means, as of any date of determination, both Engines then leased to the Lessee pursuant to the Lease.

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • Fabrication means making up data or results and recording or reporting them.

  • Diameter at breast height (dbh) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Bottle means any vessel intended to contain liquids and having a capacity of not more than 43

  • Boot camp means a short term secure or nonsecure juvenile residential facility with highly

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.

  • Hot Weather Alert means the notice provided by PJM to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for extreme hot and/or humid weather conditions which may cause capacity requirements and/or unit unavailability to be substantially higher than forecast are expected to persist for an extended period. IDR Transfer Agreement:

  • Stinger-steered automobile or watercraft transporter means an automobile or watercraft transporter

  • Engines means, as of any date of determination, all Engines then leased hereunder.

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • water meter means any apparatus for measuring or showing the volume of water supplied to, or of effluent discharged from any premises;