Omnidirectional antenna definition

Omnidirectional antenna means an antenna system designed or intended primarily to exhibit approximately equal signal transmission or reception capabilities in all horizontal directions simultaneously.
Omnidirectional antenna means an antenna used to achieve transmission or reception in all directions.
Omnidirectional antenna means an antenna that sends or receives signals equally in all directions, and includes:

Examples of Omnidirectional antenna in a sentence

  • And it can get the singe 360 degree, generally placed the Omni-directional antenna in the middle of the conference microphone units, distance of microphone units and the antenna can not be greater than 2 m.

  • Do the first connection now, Omni-directional antenna is suitable for that the conference main unit and microphone use in one room.

  • Be sure to keep the lower Omnidirectional antenna node at the same height and the locator level.

  • Two useful texts informing this process in the Philippines are Rolando Esteban’s (2002) The Kalibugans: Moros of Zamboanga Peninsula: An Enquiry into Social Fission, Hybridity and Ethnicity and Charles Macdonald’s (2001) paper ‘Concerning the identity of some ethnic categories in southern Palawan’.The salience of intermarriage in the construction of new hybrid identities is evident in many studies of the migration world.

  • Statement generation: Scientific method is simple and makes sense to everyone.

  • Relevant Sections The concept of metonymy is explored at length in section 3.8. Description Metonymy represents one entity by another, related entity.

  • When deploying the Yagi, point the antenna towards the intended target, ensuring the antenna elements are perpendicular to the ground for vertical polarization.In applications where there are multiple units that you must communicate with or units, which are in motion, you may select an Omni-directional antenna with appropriate gain.See appendix A for a list of approved antennas that can be used with the N2420B radio modem.

  • A good magnetic mount Omni-directional antenna such as the L-com 2.4 GHz/900 MHz 3 dBi Omni Magnetic Mount Antenna with RP-SMA Plug Connector is a good choice.

  • Sub-network A BS uses an Omni-directional antenna which is positioned at 50 metres above the ground level whiles the CPEs Yagi antennas are positioned between 10 metres and 20 metres depending on the heights above ground level and the clearance.

  • The receiver is an Omni-directional antenna wired with the Intel 5300 network interface card installed in the PCIe slot of a Dell Inspiron desktop computer, Intel® Core™ i7- 9700 Processor, 8GB RAM).

Related to Omnidirectional antenna

  • Satellite means any satellite owned by the Issuer or any of its Restricted Subsidiaries and any satellite purchased by the Issuer or any of its Restricted Subsidiaries pursuant to the terms of a Satellite Purchase Agreement, whether such satellite is in the process of manufacture, has been delivered for launch or is in orbit (whether or not in operational service).

  • Antenna means communications equipment that transmits or receives electromagnetic radio frequency signals used in the provision of wireless services.

  • Network User means each natural or legal person having concluded a Standard Transmission Agreement with the TSO for Transmission Services in the Transmission Grid.

  • Network Interface Device or "NID" is a Network Element (including all of its features, functions and capabilities) that includes any means of Interconnection of End User Customer premises wiring to Qwest's distribution plant, such as a cross connect device used for that purpose. "New Service Provider" means the Party to which an End User Customer switches its local Exchange Service or the Party to which an End User Customer is porting its telephone number(s).

  • Network pharmacy means any pharmacy that has an agreement to accept our pharmacy allowance for prescription drugs and diabetic equipment/supplies covered under this agreement. All other pharmacies are NON-NETWORK PHARMACIES. The one exception and for the purpose of specialty Prescription Drugs, only specialty pharmacies that have an agreement to accept our pharmacy allowance are network pharmacies and all others pharmacies are non-network pharmacies.

  • Interoperability means the ability of a Qwest OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)

  • public telecommunications network means the public telecommunications infrastructure which enables signals to be conveyed between defined network termination points by wire, by microwave, by optical means or by other electromagnetic means;

  • Technical Direction means developing work statements, determining parameters, directing other Contractors' operations, or resolving technical controversies.

  • Access Device means a card, plate, code, account number, per- sonal identification number, electronic serial number, mobile identi- fication number, or other telecommunications service, equipment, or instrument identifier or means of account access that alone or in conjunction with another device may be used to:

  • NOC means Network and Support Operating Centre.

  • telecommunications network means any wire, radio, optical, or other electromagnetic system used to route, switch, or transmit telecommunications;

  • Synchronous interaction means a real-time interaction between a patient and a health care provider for telehealth located at a distant site.

  • Spectrum Compatibility means the capability of two (2) copper loop transmission system technologies to coexist in the same cable without service degradation and to operate satisfactorily in the presence of cross talk noise from each other. Spectrum compatibility is defined on a per twisted pair basis for specific well-defined transmission systems. For the purposes of issues regarding Spectrum Compatibility, service degradation means the failure to meet the Bit Error Ratio (BER) and Signal-to-Noise Ratio (SNR) margin requirements defined for the specific transmission system for all Loop lengths, model Loops, or loss values within the requirements for the specific transmission system.

  • Brand Name Specification means a specification limited to one or more items by manufacturers’ names or catalogue number.

  • Mobile Network means a 3G or 4G network or any other mobile communications network which we choose to provide Mobile services.

  • Digital network means any online-enabled application, software, website or system offered or utilized by a transportation network company that enables the prearrangement of rides with transportation network company drivers.

  • Customer Services means the call centre for dealing with queries about your Card. You can contact Customer Services by calling 01 693 3333, or contacting us directly.

  • Customer Service means Company’s customer service telephone service department or representatives.

  • Application Software means Software formulated to perform specific business or technical functions and interface with the business or technical users of the System and is identified as such in Appendix4 of the Contract Agreement and such other Software as the parties may agree in writing to be Application Software.

  • Mobile means any mobile delivery technology including 3G, 3.5G, 4G, 5G cellular technology, and any subsequent generation technology, edge, DVBH or DMB which is or may be used with radio frequency spectrum in any band, to enable or facilitate transmission of textual material, data, voice, video and/or multimedia service to any device (whether now known or hereafter developed) which is capable of receiving and/or sending voice and/or data and/or video communications by means of a device which is designed primarily as a portable device.

  • Interface means the mixture occurring in pipeline operations between adjoining batches having similar or dissimilar physical characteristics.

  • Network Load means the load that a Network Customer designates for Network Integration Transmission Service under Tariff, Part III. The Network Customer’s Network Load shall include all load (including losses) served by the output of any Network Resources designated by the Network Customer. A Network Customer may elect to designate less than its total load as Network Load but may not designate only part of the load at a discrete Point of Delivery. Where an Eligible Customer has elected not to designate a particular load at discrete points of delivery as Network Load, the Eligible Customer is responsible for making separate arrangements under Tariff, Part II for any Point-To-Point Transmission Service that may be necessary for such non-designated load.

  • Traffic control device means a flagger, sign, signal, marking, or other device used to regulate, warn or guide traffic, placed on, over, or adjacent to a street, highway, private road open to public travel, pedestrian facility, or shared-use path by authority of a public agency or official having jurisdiction, or, in the case of a private road open to public travel, by authority of the private owner or private official having jurisdiction.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Contact adhesive means a non-aerosol adhesive that: (i) is designed for application to both surfaces to be bonded together, and (ii) is allowed to dry before the two surfaces are placed in contact with each other, and (iii) forms an immediate bond that is impossible, or difficult, to reposition after both adhesive- coated surfaces are placed in contact with each other, and (iv) does not need sustained pressure or clamping of surfaces after the adhesive-coated surfaces have been brought together using sufficient momentary pressure to establish full contact between both surfaces. “Contact Adhesive” does not include rubber cements that are primarily intended for use on paper substrates. “Contact Adhesive” also does not include vulcanizing fluids that are designed and labeled for tire repair only.

  • Direction-indicator lamp means the lamp used to indicate to other road-users that the driver intends to change direction to the right or to the left;