Hydraulic loading definition

Hydraulic loading means the rate at which liquid is applied to the land per unit area. The term “application rate” may be used for hydraulic loading.
Sample 1
Hydraulic loading means the rate of discharge imposed on a sanitaryplumbing installation and is measured in fixture units;
Sample 1

Examples of Hydraulic loading in a sentence

  • Hydraulic loading rate for TL1 effluent applied to “Secondary Sand Media” in a lined sand filter is 0.8 gal./sq.ft./day.

  • Hydraulic loading rate for TL1 effluent applied to “Preferred Sand Media” in a lined sand filter is 1.0 gal./sq.ft./day.

  • Hydraulic loading are set to prevent ponding and runoff from land application sites.

  • Hydraulic loading rate: The hydraulic loading rate noted in Table 4D must be adjusted by using Equation 4A.

  • Hydraulic loading of wastewater and irrigation water shall be at reasonable agronomic rates.

  • Hydraulic loading rate: The hydraulic loading rate noted in Table 4E must be adjusted by using Equation 4A .

  • Hydraulic loading of an LAA must be controlled to prevent off-site wastewater discharge; if wastewater is not disinfected prior to land application, storm water that falls on the LAA must be contained to prevent the potential migration off- site of pathogenic organisms.

  • Calculations and assumptions supporting the proposed design, including: 8.1.4.3.1 Soil type; and 8.1.4.3.2 Hydraulic loading rate in the soil dispersal component; and 8.1.4.3.3 OSS operating capacity and design flow.

  • At paragraph 83 of his report, The Inspector stated; “Addressing the current shortfall of housing provision is a critical issue, particularly in terms of the 20% buffer and whether it will be met within 5 years or over the entire plan period.

  • Hydraulic loading rate for TL1 effluent applied to “Preferred Sand Media” in a lined sand filter is 1.0 gal./sq.

Related to Hydraulic loading

  • Hydraulic lift tank means a tank holding hydraulic fluid for a closed-loop mechanical system that uses compressed air or hydraulic fluid to operate lifts, elevators, and other similar devices.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Exfiltration means any unauthorized release of data from within an information system. This includes copying the data through covert network channels or the copying of data to unauthorized media.

  • Hydraulic fracturing means the fracturing of underground rock formations, including shale and non-shale formations, by manmade fluid-driven techniques for the purpose of stimulating oil, natural gas, or other subsurface hydrocarbon production.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Loading means the quantity of a specific substance present per unit of surface area, such as the amount of lead in micrograms contained in the dust collected from a certain surface area divided by the surface area in square feet or square meters.

  • Incineration means an engineered process involving burning or combustion of solid waste to thermally degrade waste materials at high temperatures;

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Filtration means a process for removing particulate matter from water by passage through porous media.

  • Incinerator means any enclosed device that:

  • Flue means a passage for conveying the products of combustion from a gas appliance to the external air.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Feed means feed as defined in point (4) of Article 3 of Regulation (EC) No 178/2002;

  • Fluid means material or substance which flows or moves whether in a semisolid, liquid, sludge, gas, or any other form or state.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • Infiltration means water other than wastewater that enters a sewer system (including sewer system and foundation drains) from the ground through such means as defective pipes, pipe joints, connections, or manholes. Infiltration does not include, and is distinguished from, inflow.

  • Valve means a device used to control the flow of water in the irrigation system.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.