Fault Control Centre definition

Fault Control Centre or “FCC” means a single point of contact for the reporting and management for fault reporting and clearing;
Fault Control Centre means the Authority’s ‘Fault Control Centre’ and collation office for the reporting, reception and clearance of Faults, Clears and Supplementary Works;

Examples of Fault Control Centre in a sentence

  • Each Party is required to provide a Fault Control Centre (FCC) for Fault reporting and Fault management.

  • The Fault Control Centre will own, identify and resolverelevant faults.VI.

  • Each party is required to provide a Fault Control Centre ( FCC) for Fault reporting and Fault management.

  • Fault Control ManagerThe Fault Control Manager has responsibility for managing a 24 hour, all days a year Fault Control Centre (FCC) for its respective network.

  • Communications will generally be through the Project Manager to allow projectco-ordination and monitoring.V. Fault Control ManagerThe Fault Control Manager has responsibility for managing a 24 hour, all days a year Fault Control Centre (FCC) for its respective network.

  • Several initiatives were put in place to boost performance on the TCMS contract, including the Fault Control Centre adopting a 24/7 shift pattern, reducing fault numbers, targeted preventative maintenance, an enhanced inspection regime, cost recovery efforts and overall commissioning improvements.

  • CLAUSE 3.2 – APPROVED 3.2 In the event of an emergency where physical access is required by the Requesting Licensee to address the emergency situation, the Requesting Licensee must first obtain SingTel’s consent for access by telephone using the designated telephone number of SingTel’s Fault Control Centre.

  • Service Quality ManagerThe Service Quality Manager has responsibility for managing a 24 hour, all days a year Fault Control Centre (FCC) for their respective network.The Fault Control Centre will own, identify and resolve relevant faults.responsibility for monitoring service performance.

  • The respondent-IV i.e. the Divisional Engineer/ Assessments/ Tirupati in his written submission dt:30.09.2014, received in this office on dt:30.09.2014 stated that:1.

  • Leslie, ‘“A Different Kind of Beauty”: Scientific and Architectural Style in I.M. Pei’s Mesa Laboratory and Louis Kahn’s Salk Institute’, Historical Studies in the Natural Sciences 38, No. 2 (2008), pp.

Related to Fault Control Centre

  • Control Centre means the central facility of the Cycle Sharing System used mainly for service monitoring, operations control, and customer service. It is the location for collecting, storing, consolidating, processing the information obtained from various elements of the Cycle Sharing System as well as from users, agents, employees, and service providers.

  • Data Centre or "DC" means the primary centre where data, software, computer systems and associated components, such as telecommunication and storage systems, redundant or backup power supplies, redundant data communications, environment controls and security devices are housed and operated from;

  • Office of the Interconnection Control Center means the equipment, facilities and personnel used by the Office of the Interconnection to coordinate and direct the operation of the PJM Region and to administer the PJM Interchange Energy Market, including facilities and equipment used to communicate and coordinate with the Market Participants in connection with transactions in the PJM Interchange Energy Market or the operation of the PJM Region. On-Site Generators:

  • Innovative control technology means any system of air pollution control that has not been adequately demonstrated in practice, but would have a substantial likelihood of achieving greater continuous emissions reduction than any control system in current practice or of achieving at least comparable reductions at lower cost in terms of energy, economics, or non-air quality environmental impacts.

  • air traffic control service means a service provided for the purpose of:

  • Traffic control signal means a device, whether manually, electrically, or mechanically operated, by which traffic is alternately directed to stop and permitted to proceed.

  • Tourism destination project means a qualified non-gaming business facility that will be among the most visited privately owned or operated tourism or recreation sites in the State, and which is located within the qualified incentive area and has been determined by the authority to be in an area appropriate for development and in need of economic development incentive assistance, including a non-gaming business within an established Tourism District with a significant impact on the economic viability of that District.

  • Control Area(s) means an electric power system or combination of electric power systems to which a common automatic generation control scheme is applied.

  • M2M Flowgate means Flowgates where constraints are jointly monitored and coordinated as defined and set forth in Schedule D to this Agreement.

  • Traffic control device means a flagger, sign, signal, marking, or other device used to regulate, warn or guide traffic, placed on, over, or adjacent to a street, highway, private road open to public travel, pedestrian facility, or shared-use path by authority of a public agency or official having jurisdiction, or, in the case of a private road open to public travel, by authority of the private owner or private official having jurisdiction.

  • Integrated Digital Loop Carrier means a subscriber loop carrier system that is twenty-four (24) local Loop transmission paths combined into a 1.544 Mbps digital signal which integrates within the switch at a DS1 level.

  • Limited access highway means a highway:

  • Interconnection Activation Date means the date that the construction of the joint facility Interconnection arrangement has been completed, trunk groups have been established, joint trunk testing is completed and trunks have been mutually accepted by the Parties.

  • approach control service means air traffic control service for arriving or departing controlled flights;

  • PJM Control Area means the Control Area recognized by NERC as the PJM Control Area.

  • Combined sewer system means a system for conveying both sanitary sewage and storm water runoff.

  • IntraLATA Toll Traffic means the IntraLATA traffic, regardless of the transport protocol method, between two locations within one LATA where one of the locations lies outside of the mandatory local calling area as defined by the Commission.

  • Best available control technology or “BACT” means an emissions limitation, including a visible emissions standard, based on the maximum degree of reduction for each regulated NSR pollutant which would be emitted from any proposed major stationary source or major modification which the reviewing authority, on a case-by-case basis, taking into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combination techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 567—subrules 23.1(2) through 23.1(5) (standards for new stationary sources, federal standards for hazardous air pollutants, and federal emissions guidelines), or federal regulations as set forth in 40 CFR Parts 60, 61 and 63 but not yet adopted by the state. If the department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard or combination thereof may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation and shall provide for compliance by means which achieve equivalent results.

  • control zone shall have the meaning given in the Operating Agreement.

  • Mature marijuana plant means a marijuana plant that is not an immature marijuana plant.