Wholesale VUA Solution Architecture Sample Clauses

Wholesale VUA Solution Architecture. Figure 2: Overview of the Wholesale VUA solution architecture The NBI Wholesale VUA Products provide fibre directly from the End User premises to the Local OLT location and from there to the local PoH where it is handed off to the service provider at their local Interconnect. This technical solution is a Fibre to the Home (FTTH) end-to-end ethernet Layer 2 product delivered using 10 Gigabit Passive Optical Network (XGS-PON) fibre. This network is deployed with a maximum Optical Distribution Network (ODN) split ratio of 1:32. At the End User premises it is terminated on an Optical Network Terminal (ONT) providing a standard ethernet termination for connection to the Service Provider CPE. In the exceptional case where FTTH is not feasible, an alternative technical solution may be provided. This solution will only be used where fibre feed costs of an FTTH solution are excessively prohibitive and the alternative technical solution has been agreed with the DCCAE. At the PoH, the Wholesale VUA traffic is handed off to the Service Provider Interconnect. Details of the Interconnect types and locations are contained in the Interconnect Product Description and Interconnect Technical Manual which are available on the NBI website or via NBI Service Provider Account Manager where applicable. Table H - Wholesale VUA Performance Parameters Performance Parameter Wholesale VUA Maximum utilisation of the backhaul link between first point of active aggregation and PoH 80% Maximum Latency (two way) between WCPE and PoH 50ms Maximum Jitter between the WCPE and the PoH 22ms Maximum Packet Loss between the WCPE and PoH 0.1% Minimum service availability 99.95%