Specific Response Time Sample Clauses

Specific Response Time. The District may, in its sole discretion, establish a reasonable response time standard for Architect's performance of services: e.g., review and approval of shop drawings, preparation of change orders and field orders, interpretation of Contract Documents, or review of requests to substitute materials. These specific response times shall be considered to be reasonable and Architect will not exceed them unless, at the time of the action which necessitates a response, Architect indicates that a longer response time is necessary and gives a written explanation of the reasons why an extended response time will be needed. Any extension of the response time must be approved by District. Insufficiency of personnel shall not be an adequate excuse for delay by Architect or Architect’s Consultants. SECTION 10
AutoNDA by SimpleDocs

Related to Specific Response Time

  • Response Time PROVIDING PARTY shall respond to and resolve any problems in connection with the Corporate Services for RECEIVING PARTY within a commercially reasonable period of time, using response and proposed resolution times consistent with its response and resolution of such problems for itself.

  • Response Times (a) LogRhythm will respond to new support cases whether received via a telephone call or email within (i) four (4) Support Hours after receipt if received during a Business Day or (ii) by 12:00 p.m. Mountain Time the following Business Day if received after the end of a Business Day. LogRhythm will respond to new support cases via email or by directly contacting the applicable designated users. Response times for open support cases will vary depending on the specifics of the case and any Escalation required. If a response will require more than one business day to prepare, Customer will be notified and informed when a response can be expected.

  • Optional Xactimate Response Attachment (Part 2)

  • Line Item Question Response 43 Do your warranties cover all products, parts, and labor? Axon warrants that its law enforcement hardware products which are manufactured by Axon are free from defects in workmanship and materials for a period of one (1) year from the date of receipt. Axon-manufactured accessories are covered under a limited ninety-day warranty from the date of receipt. Non-Axon manufactured accessories are covered under the manufacturer's warranty. There are extended warranties available as defined in the Axon Master Services and Purchasing Agreement (MSPA). NON-AXON MANUFACTURED PRODUCTS For some solutions we are authorized resellers of hardware (Cradlepoint routers for Axon Fleet, Axis cameras for Axon Interview, etc.). Products that we are authorized to resell abide by the manufacturer's warranty. Further details can be provided upon request. * 44 Do your warranties impose usage restrictions or other limitations that adversely affect coverage? Restrictions are outlined in our warranty, which has been included in the uploaded attachments. * 45 Do your warranties cover the expense of technicians' travel time and mileage to perform warranty repairs? Our warranties do not cover the expense of technicians' travel time and mileage to perform warranty repairs. * 46 Are there any geographic regions of the United States (and Canada, if applicable) for which you cannot provide a certified technician to perform warranty repairs? How will Sourcewell Members in these regions be provided service for warranty repair? Axon will be available 24 hours/7 days per week by phone for emergency technical support for any system outage, and if mutually agreed upon by both parties, we can provide onsite support for local issues. If a site visit is deemed necessary due to an issue (i.e. access point failures or accidental cut wires) and not an Axon or Axon Evidence issue there may be a charge assessed to the agency. * 47 Will you cover warranty service for items made by other manufacturers that are part of your proposal, or are these warranties issues typically passed on to the original equipment manufacturer? Axon will troubleshoot these devices to the best of our ability. If we are unable to resolve the issue and the devices require warranty service, this will be performed by the manufacturer. * 48 What are your proposed exchange and return programs and policies? Axon does not allow exchanges or returns. Please see our MSPA for full details. * 49 Describe any service contract options for the items included in your proposal. Please refer to the included MSPA. * Table 10: Payment Terms and Financing Options Line Item Question Response * 50 What are your payment terms (e.g., net 10, net 30)? Payment terms are Net 30. * 51 Do you provide leasing or financing options, especially those options that schools and governmental entities may need to use in order to make certain acquisitions? Axon does not offer leasing or financing options. Alternatively, Axon offers a provision in its MSPA which allows for cancellation by the agency if sufficient funds are not appropriated. * 52 Briefly describe your proposed order process. Include enough detail to support your ability to report quarterly sales to Sourcewell as described in the Contract template. For example, indicate whether your dealer network is included in your response and whether each dealer (or some other entity) will process the Sourcewell Members' purchase orders. Axon will process orders Axon will accept from Sourcewell members directly, as our distributor network in the United States and Canada does not sell our video products. Our Order Entry team enters orders into our CRM, Salesforce. Reports will be maintained and extracted from Salesforce for quarterly reporting to Sourcewell. *

  • Primary Frequency Response Developer shall ensure the primary frequency response capability of its Large Generating Facility by installing, maintaining, and operating a functioning governor or equivalent controls. The term “functioning governor or equivalent controls” as used herein shall mean the required hardware and/or software that provides frequency responsive real power control with the ability to sense changes in system frequency and autonomously adjust the Large Generating Facility’s real power output in accordance with the droop and deadband parameters and in the direction needed to correct frequency deviations. Developer is required to install a governor or equivalent controls with the capability of operating: (1) with a maximum 5 percent droop ± 0.036 Hz deadband; or (2) in accordance with the relevant droop, deadband, and timely and sustained response settings from an approved Applicable Reliability Standard providing for equivalent or more stringent parameters. The droop characteristic shall be: (1) based on the nameplate capacity of the Large Generating Facility, and shall be linear in the range of frequencies between 59 and 61 Hz that are outside of the deadband parameter; or (2) based on an approved Applicable Reliability Standard providing for an equivalent or more stringent parameter. The deadband parameter shall be: the range of frequencies above and below nominal (60 Hz) in which the governor or equivalent controls is not expected to adjust the Large Generating Facility’s real power output in response to frequency deviations. The deadband shall be implemented: (1) without a step to the droop curve, that is, once the frequency deviation exceeds the deadband parameter, the expected change in the Large Generating Facility’s real power output in response to frequency deviations shall start from zero and then increase (for under-frequency deviations) or decrease (for over-frequency deviations) linearly in proportion to the magnitude of the frequency deviation; or (2) in accordance with an approved Applicable Reliability Standard providing for an equivalent or more stringent parameter. Developer shall notify NYISO that the primary frequency response capability of the Large Generating Facility has been tested and confirmed during commissioning. Once Developer has synchronized the Large Generating Facility with the New York State Transmission System, Developer shall operate the Large Generating Facility consistent with the provisions specified in Articles 9.5.5.1 and 9.5.5.2 of this Agreement. The primary frequency response requirements contained herein shall apply to both synchronous and non-synchronous Large Generating Facilities.

  • Customer Responsibility You agree that you are responsible for all access to and use of the Service through your account or password(s) and for any fees incurred for the Service, or for software or other merchandise purchased through the Service, or any other expenses incurred in accordance with the terms of this Agreement. You agree that you are responsible for backing up (a) any data you submit, receive or transfer over the Service, including, without limitation, your email; and (b) any data, files, programs, or applications on any device you connect to the Service. You acknowledge that you are aware that content accessible on or through the Service may contain material that is unsuitable for minors (persons under 18 years of age). You agree to supervise usage of your account by minors. You ratify and confirm any obligations incurred by a minor using your account.

  • Reactive Power and Primary Frequency Response 9.6.1 Power Factor Design Criteria

  • Filing of Amendments; Response to Commission Requests The Company will promptly advise the Representatives of any proposal to amend or supplement at any time the Initial Registration Statement, any Additional Registration Statement or any Statutory Prospectus and will not effect such amendment or supplementation without the Representatives’ consent; and the Company will also advise the Representatives promptly of (i) the effectiveness of any Additional Registration Statement (if its Effective Time is subsequent to the execution and delivery of this Agreement), (ii) any amendment or supplementation of a Registration Statement or any Statutory Prospectus, (iii) any request by the Commission or its staff for any amendment to any Registration Statement, for any supplement to any Statutory Prospectus or for any additional information, (iv) the institution by the Commission of any stop order proceedings in respect of a Registration Statement or the threatening of any proceeding for that purpose, and (v) the receipt by the Company of any notification with respect to the suspension of the qualification of the Offered Securities in any jurisdiction or the institution or threatening of any proceedings for such purpose. The Company will use its best efforts to prevent the issuance of any such stop order or the suspension of any such qualification and, if issued, to obtain as soon as possible the withdrawal thereof.

  • Workplace Violence Prevention and Crisis Response (applicable to any Party and any subcontractors and sub-grantees whose employees or other service providers deliver social or mental health services directly to individual recipients of such services): Party shall establish a written workplace violence prevention and crisis response policy meeting the requirements of Act 109 (2016), 33 VSA §8201(b), for the benefit of employees delivering direct social or mental health services. Party shall, in preparing its policy, consult with the guidelines promulgated by the U.S. Occupational Safety and Health Administration for Preventing Workplace Violence for Healthcare and Social Services Workers, as those guidelines may from time to time be amended. Party, through its violence protection and crisis response committee, shall evaluate the efficacy of its policy, and update the policy as appropriate, at least annually. The policy and any written evaluations thereof shall be provided to employees delivering direct social or mental health services. Party will ensure that any subcontractor and sub-grantee who hires employees (or contracts with service providers) who deliver social or mental health services directly to individual recipients of such services, complies with all requirements of this Section.

  • Timely and Sustained Response Interconnection Customer shall ensure that the Small Generating Facility’s real power response to sustained frequency deviations outside of the deadband setting is automatically provided and shall begin immediately after frequency deviates outside of the deadband, and to the extent the Small Generating Facility has operating capability in the direction needed to correct the frequency deviation. Interconnection Customer shall not block or otherwise inhibit the ability of the governor or equivalent controls to respond and shall ensure that the response is not inhibited, except under certain operational constraints including, but not limited to, ambient temperature limitations, physical energy limitations, outages of mechanical equipment, or regulatory requirements. The Small Generating Facility shall sustain the real power response at least until system frequency returns to a value within the deadband setting of the governor or equivalent controls. An Applicable Reliability Standard with equivalent or more stringent requirements shall supersede the above requirements.

Time is Money Join Law Insider Premium to draft better contracts faster.