Supplemental Provisions for Resecuritization This Agreement may be supplemented by means of the addition of a separate Article hereto (a "Supplemental Article") for the purpose of resecuritizing any of the Certificates issued hereunder, under the following circumstances. With respect to any Class or Classes of Certificates issued hereunder, or any portion of any such Class, as to which the Company or any of its Affiliates (or any designee thereof) is the registered Holder (the "Resecuritized Certificates"), the Company may deposit such Resecuritized Certificates into a new REMIC, grantor trust, FASIT or custodial arrangement (a "Restructuring Vehicle") to be held by the Trustee pursuant to a Supplemental Article. The instrument adopting such Supplemental Article shall be executed by the Company, the Master Servicer and the Trustee; provided, that neither the Master Servicer nor the Trustee shall withhold their consent thereto if their respective interests would not be materially adversely affected thereby. To the extent that the terms of the Supplemental Article do not in any way affect any provisions of this Agreement as to any of the Certificates initially issued hereunder, the adoption of the Supplemental Article shall not constitute an "amendment" of this Agreement. Each Supplemental Article shall set forth all necessary provisions relating to the holding of the Resecuritized Certificates by the Trustee, the establishment of the Restructuring Vehicle, the issuing of various classes of new certificates by the Restructuring Vehicle and the distributions to be made thereon, and any other provisions necessary for the purposes thereof. In connection with each Supplemental Article, the Company shall deliver to the Trustee an Opinion of Counsel to the effect that (i) the Restructuring Vehicle will qualify as a REMIC, grantor trust, FASIT or other entity not subject to taxation for federal income tax purposes and (ii) the adoption of the Supplemental Article will not endanger the status of the Trust Fund as a REMIC or (subject to Section 10.01(f)) result in the imposition of a tax upon the Trust Fund (including but not limited to the tax on prohibited transactions as defined in Section 860F(a)(2) of the Code and the tax on contributions to a REMIC as set forth in Section 860G(d) of the Code).
Please see the current Washtenaw Community College catalog for up-to-date program requirements Secondary / Post-Secondary Program Alignment Welding HIGH SCHOOL COURSE SEQUENCE 9th Grade 10th Grade 11th Grade 12th Grade English 9 Algebra I World History/Geography Biology World Language Phys Ed/Health English 10 Geometry U.S. History/Geography Physics or Chemistry World Language Visual/Performing/Applied Arts English 11 Algebra II Civics/Economics Welding English 12 Math Credit Science Credit Welding WASHTENAW COMMUNITY COLLEGE Welding Associate in Applied Science Semester 1 Math Elective(s)* 3 WAF 105 Introduction to Welding Processes 2 WAF 111 Oxy-fuel Welding 4 WAF 112 Shielded Metal Arc Welding 4 Semester Total 13 Semester 2 Speech Elective(s) 3 WAF 106 Blueprint Reading for Welders 3 WAF 123 Advanced Oxy-fuel Welding 4 WAF 124 Advanced Shielded Metal Arc Welding 4 Semester Total 14 Semester 3 Arts/Human. Elective(s) 3 Computer Lit. Elective(s) 3 WAF 215 Advanced Gas Tungsten Arc Welding 4 WAF 288 Gas Metal Arc Welding 4 Semester Total 14 Semester 4 WAF 200 Layout Theory Welding 3 WAF 210 Welding Metallurgy 3 Soc. Sci. Elective(s) 3 WAF 226 Specialized Welding Procedures 4 Semester Total 13 Semester 5 Nat. Sci. Elective(s) 4 WAF 227 Basic Fabrication 3 WAF 229 Shape Cutting Operations 3 Writing Elective(s) 3 Semester Total 13 Program Totals 67
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Incorporation of Administrative Code Provisions by Reference The provisions of Chapters 12B and 12C of the San Francisco Administrative Code are incorporated in this Section by reference and made a part of this Agreement as though fully set forth herein. Contractor shall comply fully with and be bound by all of the provisions that apply to this Agreement under such Chapters, including but not limited to the remedies provided in such Chapters. Without limiting the foregoing, Contractor understands that pursuant to §§12B.2(h) and 12C.3(g) of the San Francisco Administrative Code, a penalty of $50 for each person for each calendar day during which such person was discriminated against in violation of the provisions of this Agreement may be assessed against Contractor and/or deducted from any payments due Contractor.
Amendments to Servicing Agreements, Modification of Standard Provisions (a) Subject to the prior written consent of the Trustee pursuant to Section 3.07(b), the Master Servicer from time to time may, to the extent permitted by the applicable Servicing Agreement, make such modifications and amendments to such Servicing Agreement as the Master Servicer deems necessary or appropriate to confirm or carry out more fully the intent and purpose of such Servicing Agreement and the duties, responsibilities and obligations to be performed by the Servicer thereunder. Such modifications may only be made if they are consistent with the REMIC Provisions, as evidenced by an Opinion of Counsel. Prior to the issuance of any modification or amendment, the Master Servicer shall deliver to the Trustee such Opinion of Counsel and an Officer's Certificate setting forth (i) the provision that is to be modified or amended, (ii) the modification or amendment that the Master Servicer desires to issue and (iii) the reason or reasons for such proposed amendment or modification.
Denominations: Provisions for Payment The Securities shall be issuable as registered Securities and in the denominations of one thousand U.S. dollars ($1,000) or any integral multiple thereof, subject to Section 2.01(a)(13). The Securities of a particular series shall bear interest payable on the dates and at the rate specified with respect to that series. Subject to Section 2.01(a)(23), the principal of and the interest on the Securities of any series, as well as any premium thereon in case of redemption or repurchase thereof prior to maturity, and any cash amount due upon conversion or exchange thereof, shall be payable in the coin or currency of the United States of America that at the time is legal tender for public and private debt, at the office or agency of the Company maintained for that purpose. Each Security shall be dated the date of its authentication. Interest on the Securities shall be computed on the basis of a 360-day year composed of twelve 30-day months. The interest installment on any Security that is payable, and is punctually paid or duly provided for, on any Interest Payment Date for Securities of that series shall be paid to the Person in whose name said Security (or one or more Predecessor Securities) is registered at the close of business on the regular record date for such interest installment. In the event that any Security of a particular series or portion thereof is called for redemption and the redemption date is subsequent to a regular record date with respect to any Interest Payment Date and prior to such Interest Payment Date, interest on such Security will be paid upon presentation and surrender of such Security as provided in Section 3.03. Any interest on any Security that is payable, but is not punctually paid or duly provided for, on any Interest Payment Date for Securities of the same series (herein called “Defaulted Interest”) shall forthwith cease to be payable to the registered holder on the relevant regular record date by virtue of having been such holder; and such Defaulted Interest shall be paid by the Company, at its election, as provided in clause (1) or clause (2) below:
Schedules of Specific Commitments 1. Each Party shall set out in a Schedule the specific commitments it undertakes under Articles 5.5, 5.6 and 5.7. With respect to sectors where such commitments are undertaken, each Schedule shall specify:
Specific Provisions for Access Rights to Software For the avoidance of doubt, the general provisions for Access Rights provided for in this Section 9 are applicable also to Software. Parties’ Access Rights to Software do not include any right to receive source code or object code ported to a certain hardware platform or any right to receive respective Software documentation in any particular form or detail, but only as available from the Party granting the Access Rights.
Special Provisions for Affected Systems For the re-payment of amounts advanced to Affected System Operator for System Upgrade Facilities or System Deliverability Upgrades, the Developer and Affected System Operator shall enter into an agreement that provides for such re-payment, but only if responsibility for the cost of such System Upgrade Facilities or System Deliverability Upgrades is not to be allocated in accordance with Attachment S to the ISO OATT. The agreement shall specify the terms governing payments to be made by the Developer to the Affected System Operator as well as the re-payment by the Affected System Operator.
CLEC to CLEC Conversions for Unbundled Loops 2.1.10.1 The CLEC to CLEC conversion process for unbundled Loops may be used by US LEC when converting an existing unbundled Loop from another CLEC for the same end user. The Loop type being converted must be included in US LEC’s Interconnection Agreement before requesting a conversion.
