Scraper Mechanism Parameters Sample Clauses

Scraper Mechanism Parameters. The scraper mechanism shall scrape the full diameter of the tank. The scrapers shall be fitted to a centre 000 XX xxxxx cage by means of two 304 SS support frames. The support frames shall be joined together at the centre of the tank and supported vertically by linking the frames to a centre drive torque cage. No underwater bearings shall be permitted.
AutoNDA by SimpleDocs

Related to Scraper Mechanism Parameters

  • Validation Mechanism To be eligible for articulation, the student must show evidence of their CompTIA A+ certification and it must have been issued within three (3) years prior to their enrollment in the program.

  • Measuring DNS parameters Every minute, every DNS probe will make an UDP or TCP “DNS test” to each of the public-­‐DNS registered “IP addresses” of the name servers of the domain name being monitored. If a “DNS test” result is undefined/unanswered, the tested IP will be considered unavailable from that probe until it is time to make a new test.

  • Measuring EPP parameters Every 5 minutes, EPP probes will select one “IP address” of the EPP servers of the TLD being monitored and make an “EPP test”; every time they should alternate between the 3 different types of commands and between the commands inside each category. If an “EPP test” result is undefined/unanswered, the EPP service will be considered as unavailable from that probe until it is time to make a new test.

  • Parameters In calculating the MtM Exposure for each Transaction, the following parameters are set on the Transaction Date: ▪ On-Peak Initial Xxxx Xxxxx ▪ Off-Peak/On-Peak Price Ratio ▪ Off-Peak Initial Xxxx Xxxxx ▪ MW-Measure: initial Capacity PLC Per Tranche ▪ On-Peak Estimated Energy Quantity Per MW-Measure for each of the twelve calendar months ▪ Off-Peak Estimated Energy Quantity Per MW-Measure for each of the twelve calendar months ▪ Number of awarded Tranches In calculating the MtM Exposure for each Transaction, the following parameters are set each Trading Day subsequent to the Transaction Date: ▪ On-Peak Forward Price ▪ Off-Peak Forward Price ▪ Current Capacity PLC Per Tranche ▪ On-Peak Estimated Energy Quantity ▪ Off-Peak Estimated Energy Quantity Process to Update the On-Peak Initial Mark Prices and Off-Peak Initial Mark Prices on a Daily Basis On each Trading Day subsequent to the Transaction Date, the Pricing Agent will contact four Reference Market-Makers to obtain price quotes for on-peak and off-peak energy for PJM Western Hub. The Pricing Agent may not rely upon quotes from Seller or any Affiliate of Seller. The updated mark for a month will be equal to the average mark for that month over all sources from which a quote is available. If a monthly quote is available from any source, only the monthly quote or monthly quotes shall be used. Where quotes provide a bid and ask, the average shall be used. Where a quote for an individual month is unavailable, but the month is quoted as part of a “packaged” quote (e.g., January 2011 is only available in the form of a January/February 2011 “packaged” quote or an annual quote): ▪ If the other month/months of the package quote is/are also unavailable, then the marks for all months of the package will be calculated by multiplying the packaged quote by the ratio of the corresponding month to the corresponding calculated package quote from the previous day. Example: There are no On-Peak quotes available on day X during the contract for July 2011 or August 2011. However, there is an On-Peak July/August 2011 packaged quote of $73.00/MWh available. The On-Peak marks from day X-1 for July 2011 and August 2011 were $73.50/MWh and $76.50/MWh respectively. The day X On-Peak mark for July 2011 is set at 73.00 * [73.50] / [( (73.50 * 352) + (76.50 * 336) ) / (352+336) ] = 73 * (73.50/ 74.97) = $71.57/MWh. The day X On-Peak mark for August 2011 is set at 73.00 * [76.50] / [( (73.50 * 352) + (76.50*336) ) / (352+336) ] = 73 * (76.50 / 74.97) = $74.49/MWh. ▪ If the other month/months of the package quote is/are available, then the mark for the month will be set such that the average of the month and the other month(s) (weighted for either the On-Peak Hours or Off-Peak Hours as applicable) equals the packaged quote (see calculation example below).

  • CONSULTATIVE MECHANISMS An enterprise consultative committee may be established to assist in the implementation of this Agreement. The Consultative Committee cannot discuss or pass resolutions that negate or amend the terms or intent of this Agreement or the VBIA or the Award. The committee would consist of equal numbers of management and employee representatives. The employee representatives will be elected by the shop floor employees of the enterprise. Elected representatives will be given adequate time for meetings and to consult with employees before and after meetings. The quorum for a meeting shall be four, at least half of whom must be employee representatives. The Secretary of the CEPU (Plumbing Division) or nominee shall have a standing invitation to participate in meetings. Any issue that cannot be resolved shall be dealt with in accordance with the Dispute Settlement Procedure set out in this Agreement.

  • Consultative Mechanism The parties agree that a precondition for the effective operation of the Agreement is the establishment of consultative mechanisms with the Company. To this end, a Consultative Committee, comprising of Company appointed representatives and employee elected representatives should be established and maintained. Officers of the Union shall have a standing invitation to attend any such meeting. The purpose of the Consultative Committee shall be to consult, develop, recommend and assist to implement strategies and measures designed to achieve the objectives outlined under Clause 4 of this Agreement.

  • Acceptance Testing At the time of installation of a LIS trunk group, and at no additional charge, acceptance tests will be performed to ensure that the service is operational and meets the applicable technical parameters.

  • Purchase Mechanism If the Focus Investor exercises its rights provided in this Section 4.5, the closing of the purchase of the New Securities with respect to which such right has been exercised shall take place within 30 calendar days after the giving of notice of such exercise, which period of time shall be extended for a maximum of 180 days in order to comply with applicable laws and regulations (including receipt of any applicable regulatory or corporate approvals). The Company and the Focus Investor agree to use commercially reasonable efforts to secure any regulatory or corporate approvals or other consents, and to comply with any law or regulation necessary in connection with the offer, sale and purchase of, such New Securities.

  • Follow-up Testing An employee shall submit to unscheduled follow-up drug and/or alcohol testing if, within the previous 24-month period, the employee voluntarily disclosed drug or alcohol problems, entered into or completed a rehabilitation program for drug or alcohol abuse, failed or refused a preappointment drug test, or was disciplined for violating the provisions of this Agreement and Employer work rules. The Employer may require an employee who is subject to follow-up testing to submit to no more than six unscheduled drug or alcohol tests within any 12 month period.

  • Alternate Traffic Routing If CLEC has a LIS arrangement which provides two (2) paths to a Qwest End Office Switch (one (1) route via a Tandem Switch and one (1) direct route), CLEC may elect to utilize alternate traffic routing. CLEC traffic will be offered first to the direct trunk group (also referred to as the "primary high" route) and then overflow to the Tandem Switch group (also referred to as the "alternate final" route) for completion to Qwest End Office Switches.

Time is Money Join Law Insider Premium to draft better contracts faster.