Packaging and cleanliness Sample Clauses

Packaging and cleanliness. Packaging shall be specified in such a way that damage is prevented during transport and storage. In addition to the aspect of convenient handling (filling quantity, convenient emptying, transportability and stackability), environmental aspects shall also be taken into account. If Xxxxxxxx does not set a specific requirement for packaging, it is the supplier's duty to agree on packaging with Xxxxxxxx Purchasing prior to serial delivery. The supplier undertakes to deliver finished products without contamination, and with a standard of cleanliness which conforms to the general state-of-the-art.
AutoNDA by SimpleDocs

Related to Packaging and cleanliness

  • Housekeeping Service and Cleanliness Housekeeping Service will be provided to clean only the kitchenette and washroom areas of the Room on a regularly scheduled basis as posted by the Manager. This Housekeeping Service is not optional. Residents must ensure that all counters and sinks are clear of any dishes, appliances, or any other personal items. As part of the Housekeeping Service, the Room will be inspected. Should the Room be found in an unhygienic state, the Resident(s) will be given 24 hours to return it to a proper state, or it will be cleaned at the discretion of the Manager with a minimum charge of $25.00. The Resident shall, at all times during the Term, keep all parts of the Room clean, including and not limited to; floor coverings, doors, walls, ceilings, kitchenette appliances, counters, cupboards, faucets, sinks, furniture, glass, window frames, and other furnishings. Vacuums, brooms, and mops may be signed out at the front desk, subject to availability.

  • Cleanliness Resident agrees to keep the room in a clean and sanitary condition during the entire term of occupancy and to return his/her room to Provider in the same condition, including general cleanliness, as it was at the beginning of the term of occupancy, normal wear and tear excepted as determined by College acting on behalf of Provider. When there is vacant space in a partially occupied multi-person room, the vacant space must be maintained by the occupant(s) in a manner that will allow a new Resident to move in immediately. Failure to do so will result in assessment of a cleaning charge to Resident’s account.

  • Cleanliness and Safety; Entry Resident agrees to maintain the assigned bedroom space, the apartment and the common areas of the Property in a clean, safe and sanitary condition, to exercise all due care in the use of same, and to cooperate fully with the Property pest control program as requested. Resident will be responsible for the cost of treatment for bedbugs and similar pests to the extent Owner’s pest control vendor reasonably determines that an infestation has originated within Resident’s assigned space and during Resident’s occupancy. Resident will place all trash in provided receptacles and will be responsible for the cost of cleaning the interior or exterior of the apartment if not kept in sanitary condition. When outdoor temperatures are below 40 degrees Fahrenheit, Resident will keep the apartment’s heat turned on to prevent frozen or burst pipes, including during vacations. When outdoor temperatures exceed 85 degrees Fahrenheit, Resident will keep the apartment’s air conditioning turned on and set to a reasonable temperature to prevent mold or mildew growth, including during vacations. Owner and its agents, employees and contractors may enter any apartment and bedroom space to perform routine maintenance, inspections, showings and other ordinary functions, provided that Owner will provide advance notice to residents of an apartment before such entry. Owner reserves the right to enter an apartment and any bedroom space without prior notice (including a passkey and/or disarming the alarm or other means of entry if locks have been changed) for emergency maintenance or repair purposes, or when there is reasonable cause to believe that a situation exists that could cause danger to life, safety, health or property. Owner may confiscate any item deemed to cause a danger and is under no obligation to pay compensation for or to return such items.

  • Packaging and Shipping 3.1 Seller shall properly xxxx, xxxx, ship and route the Products in accordance with the requirements of Timken and the carriers and in accordance with all applicable laws and regulations, or if there are no stated requirements, in accordance with best commercial practices designed to prevent loss or damage due to weather, transportation and other causes.

  • Packaging and Shipment All articles are to be packed in accordance with sound commercial practices to obtain the lowest transportation rates unless otherwise specified in the NETAPP purchase order and comply with requirements of common carriers. Shipments will be valued so as to obtain the lowest transportation rate and must be made by NETAPP's choice of common carrier if specified in the purchase order. Transportation insurance for loss or damage will not be purchased by NETAPP unless specifically directed. Excess transportation costs resulting from failure to comply with the provisions of this paragraph will be debited to Seller's account. Unless otherwise specified in the NETAPP purchase order, packaging must conform to NETAPP's specifications and should be constructed for handling with a mechanical device. A complete packing list specifying NETAPPs applicable purchase order number, quantity of Goods shipped, and part number shall be enclosed with all shipments hereunder. Seller shall mark each container with necessary lifting, loading and shipping information, including the NETAPP purchase order number, date of shipment, and name and address of consignor and consignee. Seller shall bear the expense of any premium transportation charges unless otherwise agreed. Prepaid transportation charges appearing on Xxxxxx's invoice must be supported by a paid freight bill and bill of lading.

  • Loading and Unloading The Hiree is responsible for the loading and unloading of the store hired.

  • Loading RPMG shall schedule the loading and shipping of all outbound corn oil purchased hereunder, but all labor and equipment necessary to load trucks and rail cars and other associated costs shall be supplied and borne by Producer without charge to RPMG. Producer shall handle the corn oil in a good and workmanlike manner in accordance with RPMG’s written requirements and normal industry practice. Producer shall maintain the truck and rail loading facilities in safe operating condition in accordance with normal industry standards and shall visually inspect all trucks and rail cars to assure (i) cleanliness so as to avoid contamination, and (ii) that such trucks and railcars are in a condition suitable for transporting the corn oil. RPMG and RPMG’s agents shall have adequate access to the Ethanol Facility to load Producer’s corn oil on an industry standard basis that allows RPMG to economically market Producer’s corn oil. RPMG’s employees shall follow all reasonable safety rules and procedures promulgated by Producer and provided to RPMG reasonably in advance and in writing. Producer shall supply product description tags, certificates of analysis, bills of lading and/or material safety data sheets that are applicable to all shipments. In the event that Producer fails to provide the labor, equipment and facilities necessary to meet RPMG’s loading schedule, Producer shall be responsible for all costs and expenses, including without limitation actual demurrage and wait time, incurred by RPMG resulting from or arising in connection with Producer’s failure to do so.

  • Drainage Systems (1) Clear culvert inlets, outlets, and sediment catching basins.

  • Labelling and Packaging C17.1 On dispatch of any consignment of the Goods the Contractor shall send the Authority an advice note specifying the means of transport, the place and date of dispatch, the number of packages and their weight and volume. The Goods shall be packed and marked in a proper manner.

  • Skidding and Yarding Methods of skid- ding or yarding specified for particular areas, if any, are indicated on Sale Area Map. Outside Clearcutting Units and construction clearings, insofar as ground conditions permit, products shall not be skidded against reserve trees or groups of reproduction and tractors shall be equipped with a winch to facilitate skidding. B6.421 Rigging. Insofar as practicable, needed rigging shall be slung on stumps or trees desig- nated for cutting.

Time is Money Join Law Insider Premium to draft better contracts faster.