Mesh size Sample Clauses

Mesh size. All otter trawl mesh must be 6 ½ inch mesh or larger.
View SourceView Similar (6)
Mesh size. In the river area the mesh size of the gear shall be: 1) when fishing salmon or trout with a drift net and "▇▇▇▇▇" at least 100 millimetres; 2) when fishing species other than salmon and trout with a drift net and "▇▇▇▇▇" at least 80 millimetres and no more than 100 millimetres; 3) when fishing with anchored ▇▇▇▇ nets at least 80 millimetres and no more than 100 millimetres; 4) when fishing with a small bow net no more than 80 millimetres. In the sea area the mesh size of the gear shall be: 1) when fishing with fixed gear no more than 80 millimetres in the fish chamber; and 2) when fishing with anchored ▇▇▇▇ nets no more than 90 millimetres from the beginning of 1 May until the end of 31 July no more than 40 millimetres or at least 90 millimetres at other times. Section 11 Fishing season and closed seasons 1) with a scoop net "lippo" in the Midsummer Week from Monday 19 (18) o'clock until Sunday 19 (18) o'clock, and 2) with a drift net and "▇▇▇▇▇" in the Midsummer Week from Tuesday until Thursday and in the two weekends following Midsummer from Friday 19 (18) o'clock until the following Sunday 19 (18) o'clock. Fishing of species other than salmon and trout in the river area is allowed in fishing grounds in Annex 2: 1) with a scoop net "lippo" only from Monday of the Midsummer Week 19 (18) o'clock until the end of 14 September, and 2) with a drift net and "▇▇▇▇▇" only from the beginning of 15 July until the end of 14 September. In the sea area fishing of species other than salmon and trout with fixed gear is allowed from the beginning of 11 June until the end of 31 October. Fishing of trout with fixed gear is allowed from 17 June 12 o'clock until the end of 31 August. Fishing of salmon with fixed gear is allowed from 17 June 12 o'clock until the end of 15 September. Each Party may adopt by national regulations later starting days than those specified in section 6 for different categories of fishers but in a way that commercial fishing or other fishing with fixed gear starts no later than 29 June. Such national regulations may also concern restrictions on the gear. Pile driving and anchoring of fixed gear may be started before fishing is allowed. Setting of leading fences other than those for capturing fish may be started no less than seven days before fishing is allowed. Section 12 Minimum sizes and release of fish 1) captured during the closed season; or 2) captured with a prohibited gear or prohibited fishing method; or it is 3) an overwintered salmon (ke...
View SourceView Similar (2)

Related to Mesh size

  • Class Size GRADE LOADING RATIO MAXIMUM CLASS SIZE 7.01 Students shall not be assigned to any class which has reached the maximum class size except as provided within this article. 7.02 The site/program administrator is required to discuss class size at a member’s request if the member’s class exceeds the loading ratio. 7.03 Instrumental and choral music classes may exceed the maximums by 1.5 times. Physical education classes may exceed the maximum by 1.35. 7.04 The site/program administrator shall make a reasonable effort to schedule English composition classes in grades 9-12 with a maximum of 29 students. 7.05 The site/program administrator shall make a reasonable effort to schedule combination classes in which students are assigned to more than one grade level K-3 or 3-4 with a maximum of 29 students and 4-6 with a maximum of 30 students. 7.06 The District will make a reasonable effort, within the financial constraints of the District, to reduce class size maximums in those classes into which special education students are integrated, in remedial classes, and in high school composition classes. 7.07 Special Education Classes shall not exceed the maximum cited in the law. 7.07.1 SDC Class Size SDC 7-12 non-severe caseload maximum shall be 26 beginning July 2002; RSP caseload shall be 28; a. The District shall make a reasonable effort to equalize class sizes as determined by the class roster throughout the District within the grade levels and programs consistent with the needs of the students as set forth in his/her IEP and the unique features of each group. “Reasonable effort” may include, but is not limited to include, busing students on a voluntary basis to other sites, moving students to other classes at that site, or adding an instructional aide. b. Except for Hearing Impaired, Visually Handicapped Preschool, SED, and ▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ Center classes, average class size within the SDC program in the District shall not exceed 12 students. The class size for any specific class shall not exceed 17 students. In Hearing Impaired, Visually Handicapped Preschool, SED, and ▇▇▇▇▇ ▇▇▇▇▇▇▇▇▇▇ Center classes, the District class size average shall not exceed 10, and any individual class shall not exceed 14. c. The District and the Association agree to establish a Special Education/General Education Oversight Committee composed of seven members of which a majority are teachers. The committee shall recognize that consensus is the preferable decision making process. In cases where consensus is not achievable, all decisions and recommendations shall require five (5) votes. The oversight committee shall be established to oversee, guide, and facilitate the following initiatives: i. Two-year K-12 pilot program that shall include no more than six

  • Rubric The rubrics are a scoring tool used for the Educator’s self-assessment, the formative assessment, the formative evaluation and the summative evaluation. The districts may use either the rubrics provided by ESE or comparably rigorous and comprehensive rubrics developed or adopted by the district and reviewed by ESE.

  • Check Meters Developer, at its option and expense, may install and operate, on its premises and on its side of the Point of Interconnection, one or more check meters to check Connecting Transmission Owner’s meters. Such check meters shall be for check purposes only and shall not be used for the measurement of power flows for purposes of this Agreement, except as provided in Article 7.4 below. The check meters shall be subject at all reasonable times to inspection and examination by Connecting Transmission Owner or its designee. The installation, operation and maintenance thereof shall be performed entirely by Developer in accordance with Good Utility Practice.

  • Prescription Glasses This plan covers prescription glasses as follows: • Frames - one (1) collection frame per plan year; • Lenses - one (1) pair of glass or plastic collection lenses per plan year. This includes single vision, bifocal, trifocal, lenticular, and standard progressive lenses. This plan covers the following lens treatments: • UV treatment; • tint (fashion, gradient, and glass-grey); • standard plastic scratch coating; • standard polycarbonate; and • photocromatic/transitions plastic. This plan covers one (1) supply of contact lenses as follows: • conventional contact lenses - one (1) pair per plan year from a selection of • extended wear disposable lenses - up to a 6-month supply of monthly or two- week single vision spherical or toric disposable contact lenses per plan year; or • daily wear disposable lenses - up to a 3-month supply of daily single vision spherical disposable contact lenses per plan year. This plan also covers the evaluation, fitting, or follow-up care related to contact lenses. This plan covers additional contact lenses if your prescribing network provider submits a verification form, with the regular claim form, verifying that you have one of the following conditions: • anisometropia of 3D in meridian powers; • high ametropia exceeding -10D or +10D in meridian powers; • keratoconus when the member’s vision is not correctable to 20/25 in either or both eyes using standard spectacle lenses; and • vision improvement for members whose vision can be corrected two lines of improvement on the visual acuity chart when compared to the best corrected standard spectacle lenses.

  • Scratches appliance malfunctions and any resultant leak there from; (R) any stain, soiling or damage resulting from everyday use or which has built up over time, e.g. hair, body or suntan oils and/or lotions; (S) signs of soiling include darkened areas where the body comes into contact with the furniture (these darkened areas are signs of soil build-up, which is not covered); (T) general maintenance and overall cleaning of the furniture is the consumer’s responsibility; (U) damage due to harsh or corrosive chemicals; (V) acids, including without limitation, dyes and inks (except ballpoint), plant food and fertilizer and bleach, gum; (W) any non-operating part or decorative parts such as hinges, knobs, handles, or shelves; (X) coverage under another insurance program; (Y) delivery and/or redelivery and/or loss or damage to the Covered Product while in the course of transit; (Z) design deficiency; (AA) fabrics with “X” cleaning codes and non-colorfast fabrics and leathers; (AB) odors; (AC) variation of the color, or graining of wood or wood products, marble or leather; (AD) split leathers used in seat cushions, back cushions or top or inside arm areas; (AE) natural markings on leather, such as, healed scars, insect bites, brand marks or wrinkles, or suede, and leathers with embossed patterns other than those stimulating natural cowhide; (AF) non- bovine leathers, and other buffed leathers; (AG) stains, color loss or damage resulting from cleaning methods or products (detergents, abrasives or other harsh cleaning agents) other than those recommended by the furniture manufacturer; (AH) stone or sand abrasion; (AI) loss or damage resulting from: pre-existing conditions known to You; (AJ) wear related issues, such as but not limited to, fading, wear, seam separation, stress tears, loss of foam resiliency, pilling or fraying of any fabric on all types of furniture; (AK) color loss or cracking and peeling on any leather or vinyl; (AL) splits or bi-cast leather; (AM) furniture that is used for commercial, institutional, outdoor or rental purposes; (AN) Customer’s Own Material furniture; (AO) wicker, rattan, and teakwood furniture; (AP) massage chairs; (AQ) stains or damage to suede, split-grain leather hide or exotic leathers; (AR) manufacturer quality issues such as stress tears, fabric flaws, fading, color loss or change, loss of foam or resiliency, cracking and peeling of leather or vinyl, natural leather markings, and defects in design and workmanship; (AS) Stains or damage that occur during assembly, delivery, installation, before furniture is delivered to your residence, while the furniture is located outside of your residence, while the furniture is in storage or being moved to or from storage or between residences; (AT) Wear & Tear caused by repeated use such as scuffing, soiling, hair/body oil, perspiration, surface abrasions, pilling or fraying of fabric, loose joints; (AU) Stains or damage covered under any manufacturer warranty, recall, homeowner, renter or other insurance policy; (AV) Stains or damage caused by structural problems, appliance malfunctions, Acts of God or natural disasters, theft, vandalism or illegal activity (AW) Stains or damage caused by independent contractors