Common use of Design Delegation Clause in Contracts

Design Delegation. If the Contract Documents require Subcontractor to provide design services, Subcontractor shall provide those design services necessary to satisfactory complete the Subcontract Work. Subcontractor shall procure design services from licensed design professionals (the “Designer”) retained by Subcontractor as permitted by law governing the Project site. Subcontractor shall be responsible for conformance of its design with the information given and the design concept expressed in the Contract Documents. The Designer’s signature and seal shall appear on all drawings, calculations, specifications, certifications, shop drawings, and other submittals prepared by the Designer. Shop drawings and other submittals related to the Subcontract Work designed or certified by the Designer, if prepared by others, shall bear the Subcontractor’s and the Designer’s written approvals when submitted to Contractor. Contractor shall be entitled to rely upon the adequacy, accuracy and completeness of the services, certifications or approvals performed by the Designer. If the Designer is an independent professional, the design services shall be procured pursuant to a separate agreement between Subcontractor and the Designer. The Subcontractor – Designer agreement shall not provide for any limitation of liability inconsistent with Subcontractor’s liability established by the Contract Documents. Subcontractor shall fully identify any Designer in Exhibit B. Subcontractor’s design services shall include providing the design and engineering for the structure, systems machinery and equipment encompassed by Subcontractor’s scope of work. Subcontractor warrants that its design and engineering shall include all applicable specifications and criteria specified by the Contract Documents, shall be sufficient to pass all applicable inspections and testing required by any federal, state or local authorities with jurisdiction of the work (such that the Project may be substantially completed and fit for its intended purpose), and shall comply with all applicable federal, state and local laws and regulations. Subcontractor shall ensure that its design and engineering is completed and submitted for approval within such time as is necessary to allow the Project to remain on schedule. Subcontractor acknowledges that in performing its design and engineering work as provided herein it will not rely upon any specifications or criteria specified in the Contract Documents, but will produce its design and engineering so as to ensure that the completed work will be accepted by the appropriate inspecting authority. Subcontractor acknowledges and agrees that it is solely responsible for providing the proper design and engineering for its work.

Design Delegation. If the Contract Documents require Subcontractor to provide design services, Subcontractor shall provide those design services necessary to satisfactory complete the Subcontract Work. Subcontractor shall procure design services from licensed design professionals (the “Designer”) retained by Subcontractor as permitted by the law governing of the place where the Project siteis located. Subcontractor shall be responsible for conformance of its design with the information given and the design concept expressed in the Contract Documents. The Designer’s signature and seal shall appear on all drawings, calculations, specifications, certifications, shop drawings, and other submittals prepared by the Designer. Shop drawings and other submittals related to the Subcontract Work designed or certified by the Designer, if prepared by others, shall bear the Subcontractor’s and the Designer’s written approvals when submitted to Contractor. Contractor shall be entitled to rely upon the adequacy, accuracy and completeness of the services, certifications or approvals performed by the Designer. If the Designer is an independent professional, the design services shall be procured pursuant to a separate agreement between Subcontractor and the Designer. The Subcontractor – Designer agreement shall not provide for any limitation of liability inconsistent with Subcontractor’s liability established by the Contract Documents. Subcontractor shall fully identify any Designer in Exhibit B. C, List of Lower Tier Subcontractors and Suppliers. Subcontractor’s design services shall include providing the design and engineering for the structure, systems machinery and equipment encompassed by Subcontractor’s scope of work. Subcontractor warrants that its design and engineering shall include all applicable specifications and criteria specified by the Contract Documents, shall be sufficient to pass all applicable inspections and testing required by any federal, state or local authorities with jurisdiction of the work (such that the Project may be substantially completed and fit for its intended purpose), and shall comply with all applicable federal, state and local laws and regulations. Subcontractor shall ensure that its design and engineering is completed and submitted for approval within such time as is necessary to allow the Project to remain on schedule. Subcontractor acknowledges that in performing its design and engineering work as provided herein it will not rely upon any specifications or criteria specified in the Contract Documents, but will produce its design and engineering so as to ensure that the completed work will be accepted by the appropriate inspecting authority. Subcontractor acknowledges and agrees that it is solely responsible for providing the proper design and engineering for its work.

Design Delegation. If the Contract Documents require Subcontractor to provide design services, Subcontractor shall provide those design services necessary to satisfactory complete the Subcontract Work. Subcontractor shall procure design services from licensed design professionals (the “"Designer”") retained by Subcontractor as permitted by law governing the Project site. Subcontractor shall be responsible for conformance of its design with the information given and the design concept expressed in the Contract Documents. The Designer’s 's signature and seal shall appear on all drawings, calculations, specifications, certifications, shop drawings, and other submittals prepared by the Designer. Shop drawings and other submittals related to the Subcontract Work designed or certified by the Designer, if prepared by others, shall bear the Subcontractor’s 's and the Designer’s 's written approvals when submitted to Contractor. Contractor shall be entitled to rely upon the adequacy, accuracy and completeness of the services, certifications or approvals performed by the Designer. If the Designer is an independent professional, the design services shall be procured pursuant to a separate agreement between Subcontractor and the Designer. The Subcontractor – - Designer agreement shall not provide for any limitation of liability inconsistent with Subcontractor’s 's liability established by the Contract Documents. Subcontractor shall fully identify any Designer in Exhibit B. Subcontractor’s 's design services shall include providing the design and engineering for the structure, systems machinery and equipment encompassed by Subcontractor’s 's scope of work. Subcontractor warrants that its design and engineering shall include all applicable specifications and criteria specified by the Contract Documents, shall be sufficient to pass all applicable inspections and testing required by any federal, state or local authorities with jurisdiction of the work (such that the Project may be substantially completed and fit for its intended purpose), and shall comply with all applicable federal, state and local laws and regulations. Subcontractor shall ensure that its design and engineering is completed and submitted for approval within such time as is necessary to allow the Project to remain on schedule. Subcontractor acknowledges that in performing its design and engineering work as provided herein it will not rely upon any specifications or criteria specified in the Contract Documents, but will produce its design and engineering so as to ensure that the completed work will be accepted by the appropriate inspecting authority. Subcontractor acknowledges and agrees that it is solely responsible for providing the proper design and engineering for its work.

Design Delegation. If the Contract Documents require Subcontractor to provide design services, Subcontractor shall provide those design services necessary to satisfactory complete the Subcontract Work. Subcontractor shall procure design services from licensed design professionals (the “Designer”) retained by Subcontractor as permitted by the law governing of the place where the Project siteis located. Subcontractor shall be responsible for conformance of its design with the information given and the design concept expressed in the Contract Documents. The Designer’s signature and seal shall appear on all drawings, calculations, specifications, certifications, shop drawings, and other submittals prepared by the Designer. Shop drawings and other submittals related to the Subcontract Work designed or certified by the Designer, if prepared by others, shall bear the Subcontractor’s and the Designer’s written approvals when submitted to Contractor. Contractor shall be entitled to rely upon the adequacy, accuracy and completeness of the services, certifications or approvals performed by the Designer. If the Designer is an independent professional, the design services shall be procured pursuant to a separate agreement between Subcontractor and the Designer. The Subcontractor – Designer agreement shall not provide for any limitation of liability inconsistent with Subcontractor’s liability established by the Contract Documents. Subcontractor shall fully identify any Designer in Exhibit B. Appendix C, List of Lower Tier Subcontractors and Suppliers. Subcontractor’s design services shall include providing the design and engineering for the structure, systems machinery and equipment encompassed by Subcontractor’s scope of work. Subcontractor warrants that its design and engineering shall include all applicable specifications and criteria specified by the Contract Documents, shall be sufficient to pass all applicable inspections and testing required by any federal, state or local authorities with jurisdiction of the work (such that the Project may be substantially completed and fit for its intended purpose), and shall comply with all applicable federal, state and local laws and regulations. Subcontractor shall ensure that its design and engineering is completed and submitted for approval within such time as is necessary to allow the Project to remain on schedule. Subcontractor acknowledges that in performing its design and engineering work as provided herein it will not rely upon any specifications or criteria specified in the Contract Documents, but will produce its design and engineering so as to ensure that the completed work will be accepted by the appropriate inspecting authority. Subcontractor acknowledges and agrees that it is solely responsible for providing the proper design and engineering for its work.

Design Delegation. If the Contract Documents require Subcontractor to provide design services, Subcontractor shall provide those design services necessary to satisfactory complete the Subcontract Work. Subcontractor shall procure design services from licensed design professionals (the “Designer”) retained by Subcontractor as permitted by the law governing of the place where the Project siteis located. Subcontractor shall be responsible for conformance of its design with the information given and the design concept expressed in the Contract Documents. The Designer’s signature and seal shall appear on all drawings, calculations, specifications, certifications, shop drawings, and other submittals prepared by the Designer. Shop drawings and other submittals related to the Subcontract Work designed or certified by the Designer, if prepared by others, shall bear the Subcontractor’s and the Designer’s written approvals when submitted to Contractor. Contractor shall be entitled to rely upon the adequacy, accuracy and completeness of the services, certifications or approvals performed by the Designer. If the Designer is an independent professional, the design services shall be procured pursuant to a separate agreement between Subcontractor and the Designer. The Subcontractor – Designer agreement shall not provide for any limitation of liability inconsistent with Subcontractor’s liability established by the Contract Documents. Subcontractor shall fully identify any Designer in Exhibit B. B, List of Lower Tier Subcontractors and Suppliers. Subcontractor’s design services shall include providing the design and engineering for the structure, systems machinery and equipment encompassed by Subcontractor’s scope of work. Subcontractor warrants that its design and engineering shall include all applicable specifications and criteria specified by the Contract Documents, shall be sufficient to pass all applicable inspections and testing required by any federal, state or local authorities with jurisdiction of the work (such that the Project may be substantially completed and fit for its intended purpose), and shall comply with all applicable federal, state and local laws and regulations. Subcontractor shall ensure that its design and engineering is completed and submitted for approval within such time as is necessary to allow the Project to remain on schedule. Subcontractor acknowledges that in performing its design and engineering work as provided herein it will not rely upon any specifications or criteria specified in the Contract Documents, but will produce its design and engineering so as to ensure that the completed work will be accepted by the appropriate inspecting authority. Subcontractor acknowledges and agrees that it is solely responsible for providing the proper design and engineering for its work.