Design and Construction Technology Sample Clauses

Design and Construction Technology. Articulated credit awarded under this agreement may only be applied to the above AAS/AS Degree and the following College Credit Certificate (CCC) program: Drafting Design (0615010101). Date Presented to ACC ACC Recommendation Date Submitted to SBE SBE Status 10/28/2009 Approved 3/26/2010 Approved *Certain programs may not have an AS/AAS degree available. Florida Department of Education Statewide Articulation Agreement Industry Certification to AAS/AS Degree Program AAS/AS Degree Name: Drafting and Design Technology CIP Number(s): AAS: 0615130102* AS: 1615130102* Industry Certification: Autodesk Certified Associate - AutoCAD Architecture Code: ADESK017 College Credit: This Gold Standard Career Pathways Statewide Articulation Agreement guarantees the minimum award of course credits or a block of credit toward the above AAS/AS program is _3_ hours of credit. This agreement does not preclude the awarding of additional credits by any college through local agreements.
Sample 1Sample 2Sample 3See All (14)
AutoNDA by SimpleDocs
Design and Construction Technology. Articulated credit awarded under this agreement may only be applied to the above AAS/AS Degree and the following College Credit Certificate (CCC) programs: Drafting Design (0615130101) and Sustainable Design (0630330106). Date Presented to ACC ACC Recommendation Date Submitted to SBE SBE Status 05/26/2010 Approved 06/15/2010 Approved * Certain programs may not have an AS/AAS degree available. Florida Department of Education Statewide Articulation Agreement Industry Certification to AAS/AS Degree Program AAS/AS Degree Name: Drafting and Design Technology CIP Number(s): AAS: 0615130102* AS: 1615130102* Industry Certification: Autodesk Certified Professional (AutoCAD) Code: ADESK021 College Credit: The minimum award of course credits or a block of credit toward the above AAS/AS program is 3 hours of credit. This agreement does not preclude the awarding of additional credits by any college through local agreements.
Sample 1Sample 2Sample 3See All (6)
Design and Construction Technology. Articulated credit awarded under this agreement may only be applied to the above AAS/AS Degree and the following College Credit Certificate (CCC) program: Drafting Design (0615130101). Date Presented to ACC ACC Recommendation Date Submitted to SBE SBE Status 02/24/2010 Approved 3/26/2010 Approved *Certain programs may not have an AS/AAS degree available. Florida Department of Education Statewide Articulation Agreement Industry Certification to AAS/AS Degree Program AAS/AS Degree Name: Drafting and Design Technology CIP Number(s): AAS: 0615130102* AS: 1615130102 Industry Certification: ADDA Apprentice Drafter (AD) Code: AMDDA001
Sample 1Sample 2Sample 3See All (6)
Design and Construction Technology. Articulated credit awarded under this agreement may only be applied to the above AAS/AS Degree and the following College Credit Certificate (CCC) programs: Drafting Design (0615130101) and Sustainable Design (0630330106). Date Presented to ACC ACC Recommendation Date Submitted to SBE SBE Status 05/26/2010 Approved 06/15/2010 Approved * Certain programs may not have an AS/AAS degree available.
Sample 1Sample 2See All (5)
Design and Construction Technology. Articulated credit awarded under this agreement may only be applied to the above AAS/AS Degree and the following College Completion Certificate (CCC) programs: Drafting Design (0615130101) and Sustainable Design (0630330106). Date Presented to ACC ACC Recommendation Date Submitted to SBE SBE Status October 27, 2010 Approved December 17, 2010 Approved *Certain programs may not have an AS/AAS degree available. Florida Department of Education Statewide Articulation Agreement Industry Certification to AAS/AS Degree Program AAS/AS Degree Name: Early Childhood Education CIP Number(s): AAS: 0413121003* AS: 1413121003* Industry Certification: Child Development Associate Code: CPREC001 College Credit: This Gold Standard Career Pathways Statewide Articulation Agreement guarantees the minimum award of course credits or a block of credit toward the above AAS/AS program is _9_ hours of credit. This agreement does not preclude the awarding of additional credits by any college through local agreements.
Sample 1Sample 2Sample 3

Related to Design and Construction Technology

  • Design and Construction In complying with the requirements of the specification both with respect to arrangement and detail, design is to conform to the best current engineering practice. Each of the several parts of the material is to be of the maker’s standard design provided that this design is in general accordance with the specification. The essence of design should be simplicity and reliability in order to give long continuous service with high economy and low maintenance cost. Particular attention should be paid to internal and external access in order to facilitate inspection, cleaning and maintenance. The design dimensions and materials of all parts are to be such that they will not suffer damage as a result of stresses under the most severe conditions. Fully detailed specifications of the several parts of the material are to be submitted describing particularly the materials to be used. The materials used in the construction of the material are to be of the highest quality and selected particularly to meet the duties required of them. Mechanisms are to be constructed to avoid sticking due to rust or corrosion. Workmanship and general finish are to be of the highest class throughout. All similar parts of the material are to be interchangeable. All equipment is to operate without undue vibration and with the least possible amount of noise and is not to cause a nuisance. All equipment is to be designed to minimize the risk of fire and any damage, which may be caused in the event of fire. The equipment is also to be designed to prevent ingress of all vermin, accidental contact with live parts and to minimize the ingress of dust and dirt. The use of materials, which may be liable to attack by termites or other insects, is to be avoided.

  • Coordination of Design and Construction Contract Documents 5.5.1 Review model(s), Drawings, Specifications and other Construction Documents as they are developed by A/E during the Schematic Design, Design Development, and Construction Documents design phases of the Project.

  • PRE-CONSTRUCTION PHASE SERVICES The Pre-Construction Phase shall be deemed to commence upon the date specified in a written Notice to Proceed with Pre-Construction Phase Services issued by Owner and shall continue through completion of the Construction Documents and procurement of all major Subcontractor agreements. Contractor is not entitled to reimbursement for any costs incurred for Pre-Construction Phase Services performed before issuance of the written Notice to Proceed. Pre-Construction Phase Services may overlap Construction Phase Services. Contractor shall perform the following Pre-Construction Phase Services:

  • SUPERVISION AND CONSTRUCTION PROCEDURES 4.3.1 The Contractor shall supervise and direct the Work, using his / her best skill and attention. The Contractor shall be solely responsible for all construction means, methods, techniques, sequences and procedures and for coordinating all portions of the Work under the Contract. All aspects of the Project shall be subject to the inspection and approval of the State. Contractor guarantees to repair, replace, re-execute or otherwise correct any defect in workmanship, materials, or the like that fails to conform to the requirements of this Contract or that appears during the progress of the Work or within one year of final acceptance by the State.

  • Interconnection Facilities Engineering Procurement and Construction Interconnection Facilities, Network Upgrades, and Distribution Upgrades shall be studied, designed, and constructed pursuant to Good Utility Practice. Such studies, design and construction shall be based on the assumed accuracy and completeness of all technical information received by the Participating TO and the CAISO from the Interconnection Customer associated with interconnecting the Large Generating Facility.

  • Project Construction The Contractor agrees to provide continuous on-site supervision on each Job Order, while progress on the project is being accomplished. The Contractor’s Project Manager will ensure:

  • Construction Phase - Administration of the Construction Contract 1.6.1 The Construction Phase shall commence with the acceptance of the Construction Manager’s Guaranteed Maximum Price (or acceptance of a partial Guaranteed Maximum Price for a stage or phase) and issuance of a Notice to Proceed with Construction Services and terminate sixty (60) days after Final Payment to the Contractor is made, or when all of Architect/Engineer’s services have been satisfactorily performed, whichever occurs later.

  • General construction 20.2.1. Binding Nature.............................................. 20.2.2. Entire Agreement............................................ 20.2.3. Governing Law............................................... 20.2.4. Indulgences Not Waivers..................................... 20.2.5. Titles Not to Affect Interpretation......................... 20.2.6.

  • BUILDER’S RISK FOR NEW CONSTRUCTION PROJECTS If the project is NEW CONSTRUCTION, then the following provisions apply:

  • Phased Construction The Construction Manager shall provide recommendations with regard to accelerated or fast-track scheduling, procurement, or phased construction. The Construction Manager shall take into consideration cost reductions, cost information, constructability, provisions for temporary facilities and procurement and construction scheduling issues.

Time is Money Join Law Insider Premium to draft better contracts faster.