Smooth surface definition

Smooth surface means a cheese surface which is not rough or uneven.

Examples of Smooth surface in a sentence

  • Smooth surface shall be roughened by wire brushing if it is not hard and by racking if it is hard.

  • Smooth surface finish free from pockets, sand streaks, honeycomb, with uniform color and texture.

  • Surface Finish: [ Smooth] [Molded pebble texture] [Smooth surface with filled grooves at 102 mm o.c. to resemble tile] [As indicated by manufacturer's designations] [Match Architect's sample] [As selected by Architect from manufacturer's full range].

  • Table 2 – Swath relative vertical accuracy requirements VariationSmooth surface repeatability (intraswath, maximum)≤6 cmSwath overlap consistency (interswath, root mean square difference in the z direction (RMSDz))≤8 cmSwath overlap consistency (interswath, maximum)≤16 cm Smooth surface repeatabilityA measure of variations documented on a surface that would be expected to be flat and without variation.Overlap consistencyA measure of geometric alignment of two overlapping swaths.

  • Smooth surface with gloved fingers wet with acetone (item 3, table 2-11) and remove any excess adhesive from unbuffed area with a clean cloth (item 16, table 2-11) and acetone (item 3, table 2-11).

  • The Claims Administrator shall take all reasonable steps to obtain the correct address of any Class Members for whom the notice is returned by the post office as undeliverable, including using social security numbers to obtain better address information, and shall attempt re-mailings as described below.

  • The trade union movement has also been involved in child labour issues.

  • Smooth surface finish without any blemishes, depressions, protrusions etc.

  • Finishing Clean, Smooth surface and edges without cracks moisture free.

  • At all instances requiring progress photograph presentation, the following guidelines must be maintained: - Size : 5R - Type: Smooth surface, glossy print, single weight paper with white base mounted on muslin or on double weight glossy paper.

Related to Smooth surface

  • Pervious surface means an area that releases as runoff a small portion of the precipitation that falls on it. Lawns, gardens, parks, forests or other similar vegetated areas are examples of surfaces that typically are pervious.

  • Impervious surface means a surface that has been covered with a layer of material so that it is highly resistant to infiltration by water.

  • Water surface elevation means the height, in relation to the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, where specified, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • Water Surface Elevation (WSE means the height, in relation to mean sea level, of floods of various magnitudes and frequencies in the floodplains of coastal or riverine areas.

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Surface water means all water which is open to the atmosphere and subject to surface runoff.

  • Constructed wetlands means areas intentionally designed and created to emulate the water quality improvement function of wetlands for the primary purpose of removing pollutants from stormwater.

  • Groundwater means all water, which is below the surface of the ground in the saturation zone and in direct contact with the ground or subsoil.

  • Impact surface means an interior or exterior surface that is subject to damage by repeated sudden force such as certain parts of door frames.

  • Project site, where applicable, means the place indicated in bidding documents.

  • Soil means all unconsolidated mineral and organic material of any origin.

  • Excavation means the mechanical removal of earth material.

  • Common Areas is defined as all areas and facilities outside the Premises and within the exterior boundary line of the Project and interior utility raceways and installations within the Unit that are provided and designated by the Lessor from time to time for the general non-exclusive use of Lessor, Lessee and other tenants of the Project and their respective employees, suppliers, shippers, customers, contractors and invitees, including parking areas, loading and unloading areas, trash areas, roadways, walkways, driveways and landscaped areas.

  • The Site, where applicable, means the designated project place(s) named in the bidding document.

  • drainage work means any construction or reconstruction of or any alteration or addition to, or any work done in connection with a drainage installation but shall not include any work undertaken solely for purposes of repair or maintenance;

  • Surface waters means all waters of the state as defined in G.S. 143-212 except underground waters

  • Project Site(s) means the place(s) specified in the SCC for the supply and installation of the System.

  • Vegetation means trees, shrubs, nursery stock and other vegetation and includes the limbs or growth of any Vegetation.

  • the Building means any building of which the Property forms part.

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;

  • Common Area means all areas and facilities within the Project that are not designated by Landlord for the exclusive use of Tenant or any other lessee or other occupant of the Project, including the parking areas, access and perimeter roads, pedestrian sidewalks, landscaped areas, trash enclosures, recreation areas and the like.

  • The Project Site, where applicable, means the place or places named in the SCC.

  • Subsurface tracer study means the release of a substance tagged with radioactive material for the purpose of tracing the movement or position of the tagged substance in the well-bore or adjacent formation.

  • Wildlife habitat means a surface water of the state used by plants and animals not considered as pathogens, vectors for pathogens or intermediate hosts for pathogens for humans or domesticated livestock and plants.

  • Wellhead protection area means the surface and subsurface area surrounding a water well or well field that supplies a public water system through which contaminants are reasonably likely to migrate toward the water well or well field.

  • Area of shallow flooding means a designated AO or AH Zone on a community's Flood Insurance Rate Map (FIRM) with one percent or greater annual chance of flooding to an average depth of one to three feet where a clearly defined channel does not exist, where the path of flooding is unpredictable and indeterminate; and where velocity flow may be evident. Such flooding is characterized by ponding or sheet flow.