Nitrogen trifluoride definition

Nitrogen trifluoride or “NF3” means a GHG consisting at the molecular level of one nitrogen and three fluorine atoms; a corrosive gas.
Sample 1Sample 2Sample 3

Examples of Nitrogen trifluoride in a sentence

  • Nitrogen trifluoride (NF3) was later added to the list of important GHGs to reduce and codified in California statute.

  • These are:» Carbon dioxide (CO2);» Methane (CH4);» Nitrous oxide (N2O);» Hydrofluorocarbons (HFCs);» Perfluorocarbons (PFCs);» Sulfur hexafluoride (SF6); and,» Nitrogen trifluoride (NF3).Organizations must disclose whether they are excluding any of the gases above from the reporting boundary.

  • Nitrogen trifluoride was later added to the list of important GHGs to reduce and codified in California statute.

  • Carbon dioxide (CO2) is the most common, but other gases with GWP are also emitted during the process such as: Methane (CH4), Nitrous oxide (N2O), Sulphur hexafluoride (SF6), Nitrogen trifluoride (NF3) contributing to climate change.

  • Figure 1 shows the increasing trend of main GHG emissions based on sector.Under Kyoto Protocol (1997), seven greenhouse gases are considered as the significant contributors to global warming: Carbon dioxide (CO2), Methane (CH4), Nitrous oxide (N2O), Hydrofluorocarbons (HFCs), Perfluorocarbons (PFCs), Sulphur hexafluoride (SF6), Nitrogen trifluoride (NF3)3.

  • Nitrogen trifluoride has the same molecular geometry and a bond angle of 102°.

  • The Committee noted the information provided by Azerbaijan to the Committee and its correspondence with the secretariat dated 27 November 2017.

  • Nitrogen trifluoride was not one of the six gases originally mandated under the Kyoto Protocol, but was added for the second compliance period (starting 2012).

  • Nitrogen trifluoride: NF3NF3 is included in the country’s NDC.PoolsSee 2006 IPCC guidelines for guidance on carbon pools7.Aboveground biomassAboveground biomass is included in the country’s NDC.

  • These include: • Carbon Dioxide (CO2)• Methane (CH4)• Nitrous oxide (N2O)• Hydrofluorocarbons (HFCs)• Perfluorocarbons (PFCs)• Sulfur hexafluoride (SF6)• Nitrogen trifluoride (NF3) Each GHG listed above has a different global warming potential (GWP) due to its ability to absorb and re- emit infrared radiation.

Related to Nitrogen trifluoride

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • Polystyrene foam means blown polystyrene and expanded and

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Pyrolysis means the thermal degradation of a substance in the absence of any oxidising agent, which does not form part of the substance itself, to produce char and gas and/or liquid; and

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Fluoroscopy means a technique for generating x-ray images and presenting them simultaneously and continuously as visible images. This term has the same meaning as the term "radioscopy" in the standards of the International Electrotechnical Commission.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • combustible waste means non-biodegradable, non- recyclable, non-reusable, non-hazardous solid waste having minimum calorific value exceeding 1500 kcal/kg and excluding chlorinated materials like plastic, wood pulp, etc.;

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Epinephrine auto-injector means a device for immediate self-administration or administration by another trained person of a measured dose of epinephrine to a person at risk of anaphylaxis.

  • Halogen means one of the chemical elements chlorine, bromine or iodine.

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Radionuclide means a radioactive element or a radioactive isotope.

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Water supply system means a water distribution system, piping, connection fittings, valves and appurtenances within a building, structure, or premises. Water supply systems are also referred to commonly as premise plumbing systems.

  • Corrosion inhibitor means a substance capable of reducing the corrosivity of water toward metal plumbing materials, especially lead and copper, by forming a protective film on the interior surface of those materials.

  • Biological safety cabinet means a containment unit suitable for the preparation of low to moderate risk agents where there is a need for protection of the product, personnel, and environment, according to National Sanitation Foundation (NSF) Standard 49.

  • Anaerobic digestion ’ means a controlled process involving microbial decomposition of organic matter in the absence of oxygen ;

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.