Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.
Good Industry Practice means standards, practices, methods and procedures conforming to the Law and the degree of skill and care, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced person or body engaged in a similar type of undertaking under the same or similar circumstances.
Prudent Industry Practices means, at a particular time, any of the practices, methods, standards of care, skill, safety and diligence, as the same may change from time to time, but applied in light of the facts known at the time, that are consistent with the general standards applied or utilized under comparable circumstances by a reasonably prudent operator, in a good and workmanlike manner, with due diligence and dispatch, in accordance with good midstream industry practice.
ISO-NE Practices means the ISO-NE practices and procedures for delivery and transmission of energy in effect from time to time and shall include, without limitation, applicable requirements of the NEPOOL Agreement, and any applicable successor practices and procedures.
Prudent Utility Practices means those practices, methods, techniques and standards, that are generally accepted for use in electric utility industries taking into account conditions in India, and commonly used in prudent electric utility engineering and operations to design, engineer, construct, test, operate and maintain equipment lawfully, safely, efficiently and economically as applicable to power stations of the size, service and type of the Project, and that generally conform to the manufacturers' operation and maintenance guidelines.
Good Laboratory Practices or “GLP” means the then-current good laboratory practice standards promulgated or endorsed by the FDA, as defined in U.S. 21 C.F.R. Part 58 (or such other comparable regulatory standards in jurisdictions outside the United States, as they may be updated from time to time).
Best Industry Practice means that degree of skill, care and foresight and operating practice that would reasonably and ordinarily be expected of a skilled and competent supplier of services engaged in the same type of undertaking as that of the Recipient or any contractors (as applicable) under the same or similar circumstances as those contemplated by this Agreement.
Good Utility Practices means any of the practices, methods and acts engaged in or approved by a significant portion of the electric utility industry during the relevant time period, or any of the practices, methods or acts which, in the exercise of reasonable judgment in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result at a reasonable cost consistent with good business practices, reliability, safety and expedition. Good Utility Practices are not intended to be limited to the optimum practice, method or act to the exclusion of all others, but rather to be acceptable practices, methods or acts generally accepted in the region.
Standards of Practice means the care, skill, and
Group practice means a group of two or more health care providers legally organized as a partnership, professional corporation, or similar association:
Collaborative pharmacy practice means a practice of pharmacy whereby one or
Good Manufacturing Practices means current good manufacturing practices, as set forth in 21 C.F.R. Parts 210 and 211.
Community practice protocol means a written, executed agreement entered into voluntarily between an authorized pharmacist and a physician establishing drug therapy management for one or more of the pharmacist’s and physician’s patients residing in a community setting. A community practice protocol shall comply with the requirements of subrule 8.34(2).
Best Practices means a term that is often used inter-changeably with “evidence- based practice” and is best defined as an “umbrella” term for three levels of practice, measured in relation to Recovery-consistent mental health practices where the Recovery process is supported with scientific intervention that best meets the needs of the Client at this time.
New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.
Prudent Industry Practice means such practices, methods, acts, techniques, and standards as are in effect at the time in question that are consistent with (a) the standards generally followed by the United States pipeline and terminalling industries or (b) such higher standards as may be applied or followed by the HFC Entities in the performance of similar tasks or projects, or by the HEP Entities in the performance of similar tasks or projects.
Good Laboratory Practice or “GLP” means the applicable then-current standards for laboratory activities for pharmaceuticals (including biologicals) or vaccines, as applicable, as set forth in the Act and any regulations or guidance documents promulgated thereunder, as amended from time to time, together with any similar standards of good laboratory practice as are required by any Regulatory Authority having jurisdiction over the applicable activity.
Current Good Manufacturing Practices or “cGMP” means applicable Good Manufacturing Practices as specified in the United States Code of Federal Regulations and/or the EU Good Manufacturing Guidelines, and any successor legislation from time to time, prevailing at the time of the manufacture of the Product.
Prudent Utility Practice means any of the practices, methods and acts engaged in or approved by a significant portion of the electric utility industry during the relevant time period, or any of the practices, methods, and acts which, in the exercise of reasonable judgment in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result at a reasonable cost consistent with good business practices, reliability, safety, and expedition. Prudent Utility Practice is not intended to be limited to the optimum practice, method, or act to the exclusion of all others, but rather to be acceptable practices, methods, or acts, generally accepted in the region.
Best management practices (BMP) means schedules of activities, prohibitions of practices, maintenance procedures, and other management practices to prevent or reduce the pollution of waters of the United States. BMPs include treatment requirements, operation procedures, and practices to control plant site runoff, spillage or leaks, sludge or waste disposal, or drainage from raw material storage.
Good Clinical Practices means the FDA’s standards for the design, conduct, performance, monitoring, auditing, recording, analysis, and reporting of clinical trials contained in 21 C.F.R. Part 50, 54, 56, 312, 314, 320, 812, and 814 and (ii) “Good Laboratory Practices” means the FDA’s standards for conducting non-clinical laboratory studies contained in 21 C.F.R. Part 58.
Best Management Practices (BMPs means schedules of activities, prohibitions of practices, maintenance procedures, and other management practices to prevent or reduce the pollution of waters of the state. BMPs also include treatment requirements, operating procedures, and practices to control site runoff, spillage or leaks, sludge or waste disposal, or drainage from raw material storage.
Good Utility Practice means any of the practices, methods and acts engaged in or approved by a significant portion of the North American electric utility industry during the relevant time period, or any of the practices, methods and acts which, in the exercise of reasonable judgment in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result consistent with good business practices, reliability, safety and expedition. Good Utility Practice is not intended to be limited to the optimum practice, method, or act to the exclusion of all others, but rather to be acceptable practices, methods, or acts generally accepted by NERC.
Generally applicable environmental radiation standards means standards issued by the U.S. Environmental Protection Agency (EPA) under the authority of the Atomic Energy Act of 1954, as amended, that impose limits on radiation exposures or levels, or concentrations or quantities of radioactive material, in the general environment outside the boundaries of locations under the control of persons possessing or using radioactive material.
Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.
standards of generally recognised accounting practice means an accounting practice complying with standards applicable to municipalities or municipal entities as determined by the Accounting Standards Board