Jobbing moulder means a metal moulder engaged in floor moulding, loam moulding, strickle moulding or moulding from loose patterns.
Freeboard means a factor of safety usually expressed in feet above a flood level for purposes of floodplain management. "Freeboard" tends to compensate for the many unknown factors that could contribute to flood heights greater than the height calculated for a selected size flood and floodway conditions, such as wave action, blockage of bridge or culvert openings, and the hydrological effect of urbanization of the watershed.
NBOME means the National Board of Osteopathic Medical Examiners.
Shoulder means that part of a highway between the portion regularly traveled by vehicular traffic
Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.
Hard cider means the same as that term is defined in 26 U.S.C. Sec. 5041.
Opium poppy means the plant of the species Papaver somniferum L., except its seeds.
Depot means a depot in respect of which the Franchisee has entered into a Depot Lease;
Cider means an alcoholic beverage made from the fermentation of juice from primarily apples or pears, or both, which contains not less than 1/2 of 1% and not more than 8.5% of alcohol by volume. Cider may be still or carbonated and may contain other fruits, spices, botanicals, or other flavors.
NZOC means the New Zealand Olympic Committee Incorporated.
Ash means all species of the genus Fraxinus.
Dusting aid means a product designed or labeled to assist in removing dust and other soils from floors and other surfaces without leaving a wax or silicone based coating. “Dusting Aid” does not include “Pressurized Gas Duster.”
TELRIC means Total Element Long-Run Incremental Cost.
Freeboard height means for vapor degreasers the distance from the top of the vapor zone to the top of the degreaser tank. For cold cleaners, freeboard height means the distance from liquid solvent level in the degreaser tank to the top of the tank.
SAQA means the South African Qualifications Authority established by section 3 of the South African Qualifications Authority Act, 1995 (Act 58 of 1995);
Intersection means (i) the area embraced within the prolongation or connection of the lateral
Flashpoint means the minimum temperature at which a liquid gives off a vapor in sufficient concentration to ignite when tested as follows:
LOT FRONTAGE means lot frontage as defined in Town's Zoning By-law No. 1136 (1987), as amended, or any successor thereto.
Gasohol means a blended fuel composed of gasoline and fuel grade ethanol.
Dynamic driving task means the same as that term is defined in Section 41-26-102.1.
Sailboat means the same as that term is defined in Section 73-18-2.
Shopping mall means an enclosed public walkway or hall area that serves to connect retail or professional establishments.
Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.
Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.
Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.
River means a flowing body of water or a portion or tributary of a flowing body of water, including streams, creeks, or impoundments and small lakes thereon.
Copper Loop A stand-alone Local Loop comprised entirely of copper wire or copper cable. Copper Loops include two-wire and four-wire analog voice-grade Copper Loops, digital Copper Loops (e.g., DS0s and Integrated Services Digital Network lines), as well as two-wire and four-wire Copper Loops conditioned to transmit the digital signals needed to provide digital subscriber line services, regardless of whether the Copper Loops are in service or held as spares. A Copper Loop includes attached electronics using Time Division Multiplexing (TDM) technology, but does not include packet, cell or frame switching capabilities.