Exhaust Gas Temperature definition

Exhaust Gas Temperature means the average temperature of the exhaust gas stream.

Examples of Exhaust Gas Temperature in a sentence

  • Readings of power, rotational speed, nozzle position and Exhaust Gas Temperature must be taken at idling speed and at the maximum speed obtained on acceleration.

  • Readings of power/ thrust, speed and Exhaust Gas Temperature must be recorded at every significant change of Engine conditions.

  • Where the Engine characteristics are such that an acceleration from cold produces a transient over-temperature in excess of that for steady state running, a maximum Exhaust Gas Temperature limit for acceleration with a time limitation of 2 minutes may be approved by running at the required temperature for the first 2 minutes of each prescribed period at Take-off Power conditions in excess of 2 minutes (and for the whole of all the 30-second Take-off Power periods for single-engined rotorcraft).

  • Klosko, George (2004), Democratic Procedures and Liberal Consensus, New York: Oxford University Press.

  • Hejranfar and R.K. Moghadam 423Effect of EGR on the Exhaust Gas Temperature and Exhaust Opacity in Compression Ignition Engines Using Jatropha Oil as FuelA.P. Pandhare, K.C. Zende, A.S. Joglekar, S.C. Bhave and A.S. Padalkar 431The Influence of Different Turbulence Models on the FlowField Characteristics of an Aerospike NozzleS.

  • Exhaust Gas Temperature Probe (EGT) InstallationUse the J2 connector harness 700700 or 700702 labeled E1 through E4 or E6.

  • For the purpose of this Guarantee, the Certified Limit is exceeded if the Engine will not achieve the specified engine pressure ratio for takeoff thrust without exceeding the Certified Limit for its Exhaust Gas Temperature.

  • Exhaust Gas Temperature Margin is defined as the expected margin during a sea- level takeoff on a 30-degree Celsius Outside Air Temperature Day.

  • This value is mandated by the governing air quality district.• Exhaust Gas Temperature During VOC Destruction (°F) – Enter the Average exhaust gas temperature during operation.• Oxidation (System) Fan Motor Efficiency (%) – This entry is automatically entered based on the selected Letter Code (see below) unless N/A is chosen.

  • Where the Engine characteristics are such that an acceleration from cold produces a transient over-temperature in excess of that for steady-state running, a maximum Exhaust Gas Temperature limit for acceleration with a time limitation of 2 minutes may be approved by running at the required temperature for the first 2 minutes of each prescribed period at Take-off Power conditions in excess of 2 minutes (and for the whole of all the 30-Second Take-off Power periods for single-engined Rotorcraft).

Related to Exhaust Gas Temperature

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;

  • Produced water means water extracted from the earth from an oil or natural gas production well, or that is separated from oil or natural gas after extraction.

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • Residual disinfectant concentration means the concentration of disinfectant measured in mg/L in a representative sample of water.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Slug means any discharge of water, sewage, or industrial waste which in concentration of any given constituent or in quantity of flow exceeds for any period of duration longer than fifteen (15) minutes more than five (5) times the average twenty-four (24) hour concentration or flows during normal operation.

  • CO2 means carbon dioxide.

  • Total hydrocarbons (THC) means the sum of all volatile compounds measurable by a flame ionization detector (FID).

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Recycled water or “reclaimed water” means treated or recycled waste water of a quality suitable for non-potable uses such as landscape irrigation and water features. This water is not intended for human consumption.

  • Biomass means the biodegradable fraction of products, waste and residues from biological origin from agriculture (including vegetal and animal substances), forestry and related industries including fisheries and aquaculture, as well as the biodegradable fraction of industrial and municipal waste;

  • Receipt Point means the receipt/inception point(s) where Crude Oil is received into the Gathering System, as such points are specified in Section II of this tariff.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Output means the exposure rate, dose rate, or a quantity related in a known manner to these rates from a brachytherapy source or a teletherapy, remote afterloader, or gamma stereotactic radiosurgery unit for a specified set of exposure conditions.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Mine drainage means any drainage, and any water pumped or siphoned, from an active mining area or a post-mining area. The abbreviation “ml/l” means milliliters per liter.

  • Receipt Point(s means the receipt points set forth in Section 6 of this Toll Schedule.