Continuously monitor and record definition

Continuously monitor and record means to measure data values of a parameter at least once every fifteen minutes and to record either each measured data value or block average values for a fifteen-minute or shorter time period. A block average value is the average of all measured data values during the time period; or if data values are measured more frequently than once per minute, the average of measured data values taken at least once per minute during the time period.
Sample 1Sample 2Sample 3

Examples of Continuously monitor and record in a sentence

  • Continuously monitor and record the operating parameters identified during start-up performance testing and any subsequent performance testing.

  • Continuously monitor and record the pressure differential between the Work Area and the building outside of the Work Area.

  • Continuously monitor and record the concentration by volume of total sulfur compounds in the gaseous fuel reported as ppmv H2S.

  • Continuously monitor and record the operating parameters identified during startup performance testing and any subsequent performance testing.

  • The motor, fan, fan housing, and cabinet are to be grounded.Monitoring: Continuously monitor and record the pressure differential between the Work Area and the building outside of the Work Area.

  • Continuously monitor and record your Cloud resource configurations and allows you to automate the evaluation of recorded configurations against desired configurations.

  • Continuously monitor and record the combustion temperature is defined as a frequency of four points equally spaced for each hour as outlined in 40 CFR 63.2 General Provisions.

  • Grout Level: Continuously monitor and record top of pile elevation as grout sets over a 24 hour period.

  • Continuously monitor and record the concentration byvolume of total sulfur compounds in the gaseous fuel reported as ppmv H2S.

  • Continuously monitor and record data from the CEM systems during all periods of operation of each source, including periods of startup, shutdown, malfunctions, or emergency conditions, except for periods of CEM breakdown, repairs, calibration checks, preventative maintenance, and zero/span adjustments.

Related to Continuously monitor and record

  • Continuous monitoring means the collection and use of measurement data and other information to record the data inputs required to calculate the 365-day rolling average lifecycle GHG emissions, in accordance with the compliance monitoring plan described in section IV.C.

  • Asset Management Company/UTI AMC/AMC/Investment Manager means the UTI Asset Management Company Limited incorporated under the Companies Act, 1956, (1 of 1956) [replaced by The Companies Act, 2013 (No.18 of 2013)] and approved as such by Securities and Exchange Board of India (SEBI) under sub-regulation (2) of Regulation 21 to act as the Investment Manager to the schemes of UTI Mutual Fund.

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this chapter, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, oxygen or carbon dioxide concentrations), and to record average operational parameter value on a continuous basis.

  • Individual monitoring devices means devices designed to be worn by a single individual for the assessment of dose equivalent. For purposes of these regulations, "personnel dosimeter" and "dosimeter" are equivalent terms. Examples of individual monitoring devices are film badges, thermoluminescent dosimeters (TLDs), pocket ionization chambers, optically stimulated luminescence (OSL) dosimeters and personal air sampling devices.

  • Continuous emissions monitoring system or “CEMS” means all of the equipment that may be required to meet the data acquisition and availability requirements of this chapter, to sample, to condition (if applicable), to analyze, and to provide a record of emissions on a continuous basis.

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Registered in the System for Award Management (SAM) database means that—

  • Continuous emissions rate monitoring system or “CERMS” means the total equipment required for the determination and recording of the pollutant mass emissions rate (in terms of mass per unit of time).

  • Continuous emission monitoring system or "CEMS" means the equipment required under section 11 of this rule to sample, analyze, measure, and provide, by means of readings recorded at least once every fifteen (15) minutes, using an automated data acquisition and handling system (DAHS), a permanent record of nitrogen oxides emissions, stack gas volumetric flow rate, stack gas moisture content, and oxygen or carbon dioxide concentration, as applicable, in a manner consistent with 40 CFR 75*. The following systems are the principal types of continuous emission monitoring systems required under section 11 of this rule:

  • Individual monitoring means the assessment of:

  • Registered Investment Company means any one or more corporations, partnerships or trusts registered under the Investment Company Act of 1940 for which Fidelity Management and Research Company serves as investment advisor.

  • Senior citizen center means a facility having the primary purpose of providing services to the aged as defined in Section 62A-3-101.

  • Securities Account is any “securities account” as defined in the Code with such additions to such term as may hereafter be made.

  • Continuous emissions monitoring system (CEMS means all of the equipment that may be required to meet the data acquisition and availability requirements of this section, to sample, condition (if applicable), analyze, and provide a record of emissions on a continuous basis.

  • Registered in the System for Award Management (SAM means that–