Bushfire Attack Level definition

Bushfire Attack Level means the bushfire attack level of a site assessed in accordance with AS3959;
Sample 1Sample 2Sample 3

Examples of Bushfire Attack Level in a sentence

  • There is no applicable criterion.2.2 BushfireR1AThis rule applies to blocks identified in a precinct code as having a specified Bushfire Attack Level.Buildings are constructed to Australian Standard AS3959 – Construction of buildings in bushfire prone areas for the specified Bushfire Attack Level.

  • Upon registration of titles for your stage, your Olivine Customer Relations Representative will provide confirmation that you can inspect your lot prior to settlement.2.2 BUSHFIRE ATTACK LEVEL (BAL RATING)What does the BAL rating mean, will it be removed?The Bushfire Attack Level (BAL) indicates the construction requirements for building within a Bushfire Prone Area.

  • Prior to the issue of a construction certificate, plans and specifications detailing the construction of the building to Bushfire Attack Level 12.5 as defined in Australian Standard AS 3959- Construction of buildings in bushfire-prone areas and section A3.7 Addendum Appendix 3 of "Planning for Bush Fire Protection" must be submitted to and approved by the certifying authority.

  • Development in the future may be subject to the requirement for a Bushfire Attack Level Assessment and corresponding additional building standards.

  • The land is in a designated bushfire prone area and therefore a Bushfire Attack Level (BAL) assessment and Bushfire Management Plan (BMP) was required.

  • Where the removal of native vegetation is to create required defendable space and/or satisfy bushfire risk mitigation requirements under the Fire and Emergency Management Plan and/or the Bushfire Attack Level required for buildings and infrastructure associated with the use and development, a written statement explaining why the removal of native vegetation is necessary must be provided to the satisfaction of the Department of Environment, Land, Water and Planning.

  • Construction standards (Lots 2 to 7 inclusive) Nominate a minimum Bushfire Attack Level of BAL – 12.5 that the future buildings will be designed and constructed to.

  • Development and subdivision will need to comply with the requirements of SPP 3.7, which may involve the preparation of a Bushfire Attack Level assessment and Bushfire Management Plan.

  • It shall also include the statement that all materials or equipment furnished for use in the project will comply with the samples and / or certified statements.

  • Under Clause 5.4 of the Guidelines all planning applications in Bushfire Prone Areas are to be accompanied by a BAL (Bushfire Attack Level) assessment.

Related to Bushfire Attack Level

  • Poverty level means the annual family income for a family unit of a particular size, as specified in the poverty guidelines updated annually in the Federal Register by the U.S. Department of Health and Human Services.

  • Broadband level means all positions sufficiently similar in knowledge, skills, and abilities, and sufficiently similar as to kind or subject matter of work, level of difficulty or responsibilities, and qualification requirements of the work, to warrant the same treatment as to title, pay band, and other personnel transactions.

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Top Level Domain means the portion of the Domain Name to the right of the right-most period. (In the example, “COM”.) “Second Level Domain” means that portion of a domain name to the left of the right-most period, up to the second period from the right, if any, plus the Top Level Domain. (In the example, “XXXXXXXXX.XXX”.) “Third Level Domain” means that portion of a domain name to the left of the second period from the right, if any, up to the third period from the right, if any, plus the Second Level Domain. (In the example, “XXXXXXXXX.XXXXXXXXX.XXX”.).

  • Static water level means the level at which the water stands in the well when the well is not being pumped and is expressed as the distance from a fixed reference point to the water level in the well.

  • Strike Level means the Strike Level as specified in § 1 of the Product and Underlying Data.

  • Barrier Level means the Barrier Level as specified in § 1 of the Product and Underlying Data.

  • Energy Performance Score means the numeric rating generated by Portfolio Manager that compares the Energy usage of the building to that of similar buildings.

  • Vehicle measuring attitude means the position of the vehicle as defined by the co-ordinates of fiducial marks in the three-dimensional reference system.

  • Ground Level means the level of the referred point of exposed surface of the ground as indicated in the drawing.

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.

  • RBC level means an insurer's company action level RBC, regulatory action level RBC, authorized control level RBC, or mandatory control level RBC where:

  • Extreme performance coating means coatings designed for harsh exposure or extreme environmental conditions.

  • Digital Signal Level 0 (DS-0 means the lowest-level signal in the time division multiplex digital hierarchy, and represents a voice-grade channel operating at either the 56 Kbps or 64 Kbps transmission bit rates. There are twenty-four (24) DS-0 channels in a DS-1.

  • Building level or district level leader means an individual employed by the District whose job assignment is that of a building level or district level administrator or an equivalent role, including an administrator licensed by the State Board of Education, an unlicensed administrator, or an individual on an Administrator Licensure Completion Plan. Building level or district level leader does not include the superintendent, deputy superintendents, associate superintendents, and assistant superintendents.

  • Mean Sea Level means the average height of the sea for all stages of the tide. It is used as a reference for establishing various elevations within the floodplain. For the purposes of this Ordinance, the term is synonymous with the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, to which Base Flood Elevations shown on a community's Flood Insurance Rate Map are referenced.

  • Integration Level means the Social Security taxable wage base for the Plan Year, unless the Employer elects a lesser amount in (i) or (ii) below.

  • Latest Level means, in respect of an Inflation Index, the latest level of such Inflation Index (excluding any "flash" estimates) published or announced by the relevant Inflation Index Sponsor prior to the month in respect of which the Substitute Index Level is being determined.

  • Digital Signal Level 0 or "DS0" means the 64 Kbps zero-level signal in the time-division multiplex hierarchy.

  • Second Level Domain means that portion of a domain name to the left of the right-most period, up to the second period from the right, if any, plus the Top Level Domain. (In the example, “XXXXXXXXX.XXX”.) “Third Level Domain” means that portion of a domain name to the left of the second period from the right, if any, up to the third period from the right, if any, plus the Second Level Domain. (In the example, “XXXXXXXXX.XXXXXXXXX.XXX”.).

  • Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

  • Closing Level : means the official daily Closing Level of the Index as published by the Index Sponsor in relation to each Scheduled Trading Day during the Investment Term.

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Energy savings performance contract means a contract under which the rate of payments is based upon energy and operational cost savings and a stipulated maximum energy consumption level over the life of the contract.

  • Maximum contaminant level goal or “MCLG” means the maximum level of a contaminant in drinking water at which no known or anticipated adverse effect on the health of persons would occur, and which allows an adequate margin of safety. MCLGs are nonenforceable health goals.