VERTICAL LADDERS Sample Clauses

VERTICAL LADDERS. Vertical ladders or individual rungs, as appropriate, shall be installed at all hatches (except the large hatche leading down into the Storage Room). All vertical ladders shall be removable, except for individual rungs welded to the structure. Hardware for removable vertical ladders shall be secured with 316 grade stainless steel fasteners, all bolts shall extend 1.5-5 threads beyond the nut. A flat washer shall be used under both the head of the bolt and under the nut. A 316SS spit lock washer or nylon insert lock nut shall be used on the nut side of the bolted connection. All vertical ladders shall have non-skid tape applied on the top sides of the ladder rungs. All individual rungs inside the potable water tank shall be stainless steel. All other vertical ladders (not in the potable water tank) shall be of carbon steel construction. Where ladders are required on bulkheads, they may be separate rungs of ¾ inch square bar set on edge welded to the structure. Where not extended from side to side of adjacent structure, these rungs shall be stirrup shaped to prevent slipping endwise. Rungs shall be a minimum of 18 inches wide with 7 inches toe room.
AutoNDA by SimpleDocs

Related to VERTICAL LADDERS

  • Fire, Life Safety, and Accessibility Codes The following codes, in the versions approved by the Georgia State Fire Marshal/Fire Safety Commissioner and Department of Human Resources, shall be used. The Design Professional will designate any additional codes or special modifications in the Supplementary General Conditions.

  • Electrical appliance safety The Hirer shall ensure that any electrical appliances brought by them to the premises and used there shall be safe, in good working order, and used in a safe manner in accordance with the Electricity at Work Regulations 1989. Where a residual circuit breaker is provided the hirer must make use of it in the interests of public safety.

  • Porcupine Site Highway 11

  • Electrical Safety Only UL approved items are permitted in Housing & Residence Life. Extension and multi-use cords must be heavy duty, single plug, and be UL approved. Altering or adapting electrical outlets and equipment and overloading circuits jeopardize safety and thus are not permitted.

  • Drainage Systems (1) Clear culvert inlets, outlets, and sediment catching basins.

  • Power System Stabilizers The Developer shall procure, install, maintain and operate Power System Stabilizers in accordance with the requirements identified in the Interconnection Studies conducted for Developer’s Large Generating Facility. NYISO and Connecting Transmission Owner reserve the right to reasonably establish minimum acceptable settings for any installed Power System Stabilizers, subject to the design and operating limitations of the Large Generating Facility. If the Large Generating Facility’s Power System Stabilizers are removed from service or not capable of automatic operation, the Developer shall immediately notify the Connecting Transmission Owner and NYISO. The requirements of this paragraph shall not apply to wind generators.

  • Safety Shoes 3901 Employees who are required to wear steel-toed safety shoes will receive $200 toward the purchase and/or replacement of these shoes in the first quarter of each year. Any employee out on an authorized leave shall receive payment within thirty days of their return to paid duty. New employees who are required to wear steel- toed safety shoes will receive $200 toward the purchase of shoes in their first paycheck; for employees hired on or after December 1, he/she shall not receive an additional $200 in the following February.

  • Verizon OSS Facilities Any gateways, interfaces, databases, facilities, equipment, software, or systems, used by Verizon to provide Verizon OSS Services to CBB.

  • Underground Facilities All underground pipelines, conduits, ducts, cables, wires, manholes, vaults, tanks, tunnels, or other such facilities or attachments, and any encasements containing such facilities, including without limitation those that convey electricity, gases, steam, liquid petroleum products, telephone or other communications, cable television, water, wastewater, storm water, other liquids or chemicals, or traffic or other control systems.

  • UNDERGROUND LOCATIONS Prior to the Company commencing any work the Customer must advise the Company of the precise location of all underground services on the site and clearly xxxx the location. The underground mains and services the Customer must identify include, but are not limited to, telephone cables, fibre optic cables, electrical services, gas services, sewer services, pumping services, sewer connections, sewer sludge mains, water mains, irrigations pipes, oil pumping mains and any other services that may be on site. Whilst the Company will take all care to avoid damage to any underground services the Customer agrees to indemnify the Company in respect of all any liability claims, loss, damage, cost and fines as a result of damage to services not precisely located and notified pursuant to this clause.

Time is Money Join Law Insider Premium to draft better contracts faster.