Valve Body Sample Clauses

Valve Body. Valve bodies shall be minimum cast steel with integrally cast flanges for all services except low pressure air and water. Parts contacting the process fluid are determined by line classification. Minimum inlet connections for flanged valves are 1-inch. All steel valves with inlet flange size 2-inch or smaller, shall be 150# minimum. Use 3/4-inch x 1-inch screwed valves for thermal relief.
AutoNDA by SimpleDocs
Valve Body. Valve bodies shall be manufactured from cast iron or cast steel depending on test pressures and as specified. The valve body shall have integral hubs for shaft bearing housings. Valves shall be provided with supporting feet and lifting rings where specified. A flow direction arrow shall either be cast into the body or shall be a brass plate screwed onto the body with brass screws.
Valve Body. The body of the valves shall be manufactured from ductile iron and all external bolts, nuts and gland followers shall be grade 316 material.

Related to Valve Body

  • Contracting authority The contracting authority of this public contract is Enabel, the Belgian development agency, public-law company with social purposes, with its registered office at Xxx Xxxxx 000, 0000 Xxxxxxxx xx Xxxxxxx (enterprise number 0264.814.354, RPM/RPR Brussels). Enabel has the exclusive competence for the execution, in Belgium and abroad, of public service tasks of direct bilateral cooperation with partner countries. Moreover, it may also perform other development cooperation tasks at the request of public interest organisations, and it can develop its own activities to contribute towards realisation of its objectives. For this procurement contract, Xxxxxx is represented by person(s) who shall sign the award letter and are mandated to represent the organisation towards third parties.

  • Interconnection Customer Authority Consistent with Good Utility Practice, this LGIA, and the CAISO Tariff, the Interconnection Customer may take actions or inactions with regard to the Large Generating Facility or the Interconnection Customer’s Interconnection Facilities during an Emergency Condition in order to (i) preserve public health and safety, (ii) preserve the reliability of the Large Generating Facility or the Interconnection Customer’s Interconnection Facilities,

  • Competent Authority Exchange of information concerning Competent Authority Requests is expected to take place between the Competent Authorities or their authorized representatives. The Competent Authorities intend to provide written notification to each other providing contact information (name, title, and mailing address) for each jurisdiction’s Competent Authority for purposes of the IGA, and to update this contact information, as appropriate.

  • Statewide HUB Program Statewide Procurement Division Note: In order for State agencies and institutions of higher education (universities) to be credited for utilizing this business as a HUB, they must award payment under the Certificate/VID Number identified above. Agencies, universities and prime contractors are encouraged to verify the company’s HUB certification prior to issuing a notice of award by accessing the Internet (xxxxx://xxxxx.xxx.xxxxx.xx.xx/tpasscmblsearch/index.jsp) or by contacting the HUB Program at 000-000-0000 or toll-free in Texas at 0-000-000-0000.

  • Voltage Regulators Whenever the Large Generating Facility is operated in parallel with the New York State Transmission System, the automatic voltage regulators shall be in automatic operation at all times. If the Large Generating Facility’s automatic voltage regulators are not capable of such automatic operation, the Developer shall immediately notify NYISO, or its designated representative, and ensure that such Large Generating Facility’s real and reactive power are within the design capability of the Large Generating Facility’s generating unit(s) and steady state stability limits and NYISO system operating (thermal, voltage and transient stability) limits. Developer shall not cause its Large Generating Facility to disconnect automatically or instantaneously from the New York State Transmission System or trip any generating unit comprising the Large Generating Facility for an under or over frequency condition unless the abnormal frequency condition persists for a time period beyond the limits set forth in ANSI/IEEE Standard C37.106, or such other standard as applied to other generators in the New York Control Area on a comparable basis.

  • Audit Authority The Section of Audit and Control of the Ministry of Finance of the Slovak Republic shall act as the Audit Authority. The Head of the Audit Authority is the Director General of the Section of Audit and Control. The Director General of the Section of Audit and Control is directly subordinated to the Minister of Finance. The Section of Audit and Control is independent and functionally separated from the Certifying Authority, other administrative units of the Ministry of Finance of the Slovak Republic, and other bodies involved in the implementation of the Financial Mechanism. The roles and responsibilities of the Audit Authority are stipulated in the Regulation, in particular Article

  • Local Authority Central Spend Equivalent Funding representing a proportion of the LA Education Budget money which the LA would be able to retain, from the non- delegated elements of the Schools Budget and the relevant items in the LA Budget, if the Academy were a maintained school. The proportion which this funding will represent will be based on the elements of the LA's Section 251 Budget Return which are relevant to that Academy.

  • Developer Authority Consistent with Good Utility Practice and this Agreement, the Developer may take whatever actions or inactions with regard to the Large Generating Facility or the Developer Attachment Facilities during an Emergency State in order to (i) preserve public health and safety, (ii) preserve the reliability of the Large Generating Facility or the Developer Attachment Facilities, (iii) limit or prevent damage, and (iv) expedite restoration of service. Developer shall use Reasonable Efforts to minimize the effect of such actions or inactions on the New York State Transmission System and the Connecting Transmission Owner’s Attachment Facilities. NYISO and Connecting Transmission Owner shall use Reasonable Efforts to assist Developer in such actions.

  • Legal Picket Lines Refusal to cross a legally established picket line shall not constitute cause for discipline or dismissal. An employee who refuses to cross a legally established picket line shall be considered to be absent without pay.

  • Settlement Authority The Recipient will not enter into a settlement of any Proceeding against any of the Indemnified Parties unless the Recipient has obtained from the Province or Canada, as applicable, prior written approval or a waiver of this requirement. If the Recipient is requested by the Province or Canada to participate in or conduct the defence of any Proceeding, the Province or Canada, as applicable, will cooperate with and assist the Recipient to the fullest extent possible in the Proceeding and any related settlement negotiations.

Time is Money Join Law Insider Premium to draft better contracts faster.