Orders Forecasts Acceptance of Products Etc
Orders Forecasts Acceptance of Products Etc Sample Clauses
Related to Orders Forecasts Acceptance of Products Etc
Purchase Order Pricing/Product Deviation If a deviation of pricing/product on a Purchase Order or contract modification occurs between the Vendor and the TIPS Member, TIPS must be notified within five (5) business days of receipt of change order. Termination for Convenience of TIPS Agreement Only TIPS reserves the right to terminate this agreement for cause or no cause for convenience with a thirty (30) days prior written notice. Termination for convenience is conditionally required under Federal Regulations 2 CFR part 200 if the customer is using federal funds for the procurement. All purchase orders presented to the Vendor, but not fulfilled by the Vendor, by a TIPS Member prior to the actual termination of this agreement shall be honored at the option of the TIPS Member. The awarded Vendor may terminate the agreement with ninety (90) days prior written notice to TIPS 0000 XX Xxx Xxxxx, Xxxxxxxxx, Xxxxx 00000. The vendor will be paid for goods and services delivered prior to the termination provided that the goods and services were delivered in accordance with the terms and conditions of the terminated agreement. This termination clause does not affect the sales agreements executed by the Vendor and the TIPS Member customer pursuant to this agreement. TIPS Members may negotiate a termination for convenience clause that meets the needs of the transaction based on applicable factors, such as funding sources or other needs. TIPS Member Purchasing Procedures Usually, purchase orders or their equal are issued by participating TIPS Member to the awarded vendor and should indicate on the order that the purchase is per the applicable TIPS Agreement Number. Orders are typically emailed to TIPS at xxxxxx@xxxx-xxx.xxx. • Awarded Vendor delivers goods/services directly to the participating member. • Awarded Vendor invoices the participating TIPS Member directly. • Awarded Vendor receives payment directly from the participating member. • Fees are due to TIPS upon payment by the Member to the Vendor. Vendor agrees to pay the participation fee to TIPS for all Agreement sales upon receipt of payment including partial payment, from the Member Entity or as otherwise agreed by TIPS in writing and signed by an authorized signatory of TIPS.
TRUNK FORECASTING 58.1. CLEC shall provide forecasts for traffic utilization over trunk groups. Orders for trunks that exceed forecasted quantities for forecasted locations will be accommodated as facilities and/or equipment are available. Embarq shall make all reasonable efforts and cooperate in good faith to develop alternative solutions to accommodate orders when facilities are not available. Company forecast information must be provided by CLEC to Embarq twice a year. The initial trunk forecast meeting should take place soon after the first implementation meeting. A forecast should be provided at or prior to the first implementation meeting. The semi-annual forecasts shall project trunk gain/loss on a monthly basis for the forecast period, and shall include:
Rolling Forecast (i) On or before the fifteenth (15th) calendar day of each month during the Term (as defined in Section 6.1 herein), Buyer shall provide Seller with an updated eighteen (18) month forecast of the Products to be manufactured and supplied (each a “Forecast”) for the eighteen (18) month period beginning on the first day of the following calendar month. The first two months of each Forecast will restate the balance of the Firm Order period of the prior Forecast, and the first three (3) months of the Forecast shall constitute the new Firm Order period for which Buyer is obligated to purchase and take delivery of the forecasted Product, and the supply required for the last month of such new Firm Order period shall not be more than one (1) full Standard Manufacturing Batch from the quantity specified for such month in the previous Forecast (or Initial Forecast, as the case may be). Except as provided in Section 2.2(a), Purchase Orders setting forth Buyer’s monthly Product requirements will be issued for the last month of each Firm Order period no later than the fifteenth calendar day of the first month of each Firm Order period, and such Purchase Order will be in agreement with the Firm Order period of the Forecast. If a Purchase Order for any month is not submitted by such deadline, Buyer shall be deemed to have submitted a Purchase Order for such month for the amount of Product set forth in Buyer’s Forecast for such month.
Purchase Orders Unless otherwise authorized in writing by the Commissioner, no Product is to be delivered or furnished by Contractor until transmittal of an official Purchase Order from the Authorized User. Unless terminated or cancelled pursuant to the authority vested in the Commissioner, Purchase Orders shall be effective and binding upon the Contractor when placed in the mail or electronically transmitted prior to the termination of the contract period, addressed to the Contractor at the address for receipt of orders set forth in the Contract or in the Contract Award Notification. All Purchase Orders issued pursuant to Contracts let by the Commissioner must bear the appropriate Contract number and, if necessary, required State approvals. As deemed necessary, the Authorized User may confirm pricing and other Product information with the Contractor prior to placement of the Purchase Order. The State reserves the right to require any other information from the Contractor which the State deems necessary in order to complete any Purchase Order placed under the Contract. Unless otherwise specified, all Purchase Orders against Centralized Contracts will be placed by Authorized Users directly with the Contractor and any discrepancy between the terms stated on the vendor’s order form, confirmation or acknowledgment, and the Contract terms shall be resolved in favor of the terms most favorable to the Authorized User. Should an Authorized User add written terms and conditions to the Purchase Order that conflict with the terms and conditions of the Contract, the Contractor has the option of rejecting the Purchase Order within five business days of its receipt but shall first attempt to negotiate the additional written terms and conditions in good faith with the Authorized User, or fulfill the Purchase Order. Notwithstanding the above, the Authorized User reserves the right to dispute any discrepancies arising from the presentation of additional terms and conditions with the Contractor. If, with respect to an Agency Specific Contract let by the OGS Commissioner, a Purchase Order is not received by the Contractor within two weeks after the issuance of a Contract Award Notification, it is the responsibility of the Contractor to request in writing that the appropriate Authorized User forward a Purchase Order. If, thereafter, a Purchase Order is not received within a reasonable period of time, the Contractor shall promptly notify in writing the appropriate purchasing officer in OGS. Failure to timely notify such officer may, in the discretion of the OGS Commissioner and without cost to the State, result in the cancellation of such requirement by the OGS Commissioner with a corresponding reduction in the Contract quantity and price.
Firm Orders On a rolling basis during the term of the Product Agreement, Client will issue an updated [***] forecast on or before the [***]. This forecast will start on [***]. Unless otherwise agreed in the Product Agreement, the first [***] of this updated forecast will be considered binding firm orders. Concurrent with the [***] forecast, Client will issue a new firm written order in the form of a purchase order or otherwise (“Firm Order”) by Client to purchase and, when accepted by Patheon, for Patheon to manufacture and deliver the agreed quantity of the Products. The Delivery Date will not be less than [***] following the date that the Firm Order is submitted. Firm Orders submitted to Patheon will specify Client's purchase order number, quantities by Product type, monthly delivery schedule, and any other elements necessary to ensure the timely manufacture and shipment of the Products. The quantities of Products ordered in those written orders will be firm and binding on Client and may not be reduced by Client. Further, for [***] of the [***] forecast, Client commits that its Firm Orders for each of those months will be no less than [***], respectively, of the forecasted amounts for [***]. If Client orders less than the agreed volume, the parties will meet to discuss how to smooth production to meet demand. If it is not possible to smooth production to meet forecasted demand, Client will compensate Patheon for not meeting the Firm Order commitment by paying the [***] for the shortfall between what Client actually ordered and its Firm Order commitment as set forth above or as otherwise provided for in the applicable Product Agreement. The forgoing shall be Patheon’s sole and exclusive remedy for Client’s failure to meet the Firm Order commitment. No amounts shall be payable to Patheon if Client is unable to make the Firm Order commitment because of Force Majeure or because the Product is taken off the market due in response to an action by an Authority or otherwise as required by Applicable Law. Patheon commits to make [***] of the forecasted amounts available to Client, and will reserve [***] of its capacity to meet that commitment. Patheon shall notify Client as soon as possible of impending capacity constraints in relation to Client’s forecasts and/or changes in Client’s demands.
Forecast Customer shall provide Flextronics, on a monthly basis, a rolling twelve (12) month forecast indicating Customer’s monthly Product requirements. The first ninety (90) days of the forecast shall be in weekly time buckets and will constitute Customer’s written purchase order for all Work to be completed within the first ninety (90) day period. Such purchase orders will be issued in accordance with Section 3.2 below.
PURCHASE ORDERS AND INVOICING All invoices shall at a minimum, include the items listed below and any additional information identified in the Authorized User RFQ and resulting Authorized User Agreement: Contract Number; Contractor/Reseller Name; NYS Vendor ID; Manufacturer Part Number (SKU); Product Name; Product Description; Quantity; NYS Net Price for each Product; Specific designation of special price(s) which may be better than the NYS Net Contract Price; and Invoice Total.
Purchase Order Flip via Ariba Network (AN) The online process allows suppliers to submit invoices via the AN for catalog and non- catalog goods and services. Contractors have the ability to create an invoice directly from their Inbox in their AN account by simply “flipping” the purchase order into an invoice. This option does not require any special software or technical capabilities. For the purposes of this section, the Contractor warrants and represents that it is authorized and empowered to and hereby grants the State and the third-party provider of MFMP the right and license to use, reproduce, transmit, distribute, and publicly display within the system the information outlined above. In addition, the Contractor warrants and represents that it is authorized and empowered to and hereby grants the State and the third-party provider the right and license to reproduce and display within the system the Contractor’s trademarks, system marks, logos, trade dress, or other branding designation that identifies the products made available by the Contractor under the Contract.
PRODUCT ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor in the Authorized User Agreement, Authorized User(s) shall have sixty (60) days from the date of delivery to accept all Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Title or other property interest and risk of loss shall not pass from Contractor to the Authorized User until the Products have been accepted. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty
Supply of Product 3.1 In accordance with the terms of this Agreement, GENSIA SICOR (through SICOR) shall supply all of PURCHASER'S ordered requirements for Product in bulk form for use by PURCHASER in the Territories in accordance with the provisions of this Agreement. The right and license of PURCHASER to obtain, use and distribute Product (including, without limitation, the right to make or have made Product) from GENSIA SICOR and SICOR shall be (i) non-exclusive in the Non-exclusive Territory, and (ii exclusive in the Exclusive Territory; provided, however, that the rights and licenses set forth in clause (ii) above shall be co-exclusive in each jurisdiction in which GENSIA SICOR (or ALCO or SICOR, as the case may be) has binding written agreements, or binding written commitments that will lead to binding written agreements, to sell Product on the Restatement Date (which is limited to only those [ * ] and the [ * ] with whom GENSIA SICOR has commitments that are in existence on the Restatement Date), but only with respect to such third parties and only until the earlier of expiration or termination of such agreements; and provided, further that GENSIA SICOR shall use all diligent efforts (without any obligation to violate or alter the terms of such agreements existing on the Restatement Date) to provide PURCHASER with exclusive rights and licenses to sell the Products in the Territory as soon as possible. All Product hereunder shall be manufactured at SICOR's GMP facilities at Rho, Italy, the facility identified in Exhibit 9 hereto, the Santxx Xxxility and additional (as necessary and as provided in Section 6 below) GMP qualified facilities that are approved in advance by PURCHASER (which approval will not be unreasonably withheld). In addition, all Product shall be manufactured (A) in accordance with drug substance manufacturing and quality control procedures existing on the Effective Date, which drug substance manufacturing and quality control procedures have been included in manufacturer's Abbreviated Antibiotic Drug Application ("AADA") submitted to the FDA in 1996, and that will be submitted to other Regulatory Authorities in the Territory (which AADA shall include at least the elements set forth in the Drug Master File) in accordance with U.S. FDA current Good Manufacturing Practices, and (B) to the Q/C Specifications. GENSIA SICOR shall cause SICOR to use its diligent efforts to [ * ] in order to produce and supply all Product ordered by Purchaser hereunder and to meet the Product [ * ] that will be set forth in Schedule 1 hereto within [ * ] after the Restatement Date. In addition, GENSIA SICOR agrees to the following (and GENSIA SICOR agrees to cause SICOR to undertake):
