Failure to Supply If IPC is unable (or anticipates an inability) to manufacture or deliver all or a portion of a Product to Tris as required by a confirmed or accepted Purchase Order pursuant to Section 3.3 of this Agreement, IPC shall promptly notify Tris in writing of the period for which such inability (or anticipated inability) to so manufacture or deliver is expected (an “Anticipated Inability to Deliver”). For avoidance of doubt, so long as IPC uses Commercially Reasonable Efforts and the anticipated inability is a force majeure event, IPC shall not be in breach of the Purchase Order(s) affected nor this Agreement, however, regardless of whether or not IPC has breached a Purchase Order or this Agreement it shall still be liable for Cover and the other obligations set forth in this Section 3.10. In the event IPC is unable to meet Tris’s Purchase Orders or IPC issues a notice of an Anticipated Inability to Deliver, IPC’s obligation to supply shall continue but Tris’ obligation to purchase the Product that IPC is unable to timely supply in accordance with Section 3.3 above shall be suspended and Tris, without relieving IPC of its obligations under Section 3.3, may mitigate its damages by purchasing from another Person the quantity of substitute product that it requires beyond what IPC is able to deliver. Tris shall use Commercially Reasonable Efforts to obtain such substitute product at a reasonable price and communicate same to IPC in writing. Tris shall be entitled to deduct the difference in cost paid by Tris for such substitute product over the cost of the Product (“Cover”), if any, from any amounts otherwise payable to IPC hereunder, and, to the extent not so offset, IPC shall reimburse Tris for such Cover , within thirty (30) days of receipt of invoice from Tris. IPC will not be entitled to any share of positive Net Profits for sale of substitute product not sourced by Tris from IPC hereunder (provided IPC shall continue to fund its share of negative Net Profits), except to the extent IPC has fully reimbursed Tris for the Cover expense with respect to such product. If at any time thereafter during the Term, IPC is able to timely deliver Product in satisfaction of Tris’ Purchase Orders, IPC shall so notify Tris in writing and, subject to Tris’ contractual commitments to third parties, Tris shall undertake commercially reasonable efforts to limit such contractual commitment in order not to exceed IPC’s volume and period it is unable to supply, Tris will resume purchasing the Product from IPC. If IPC’s inability to timely deliver to Tris the quantity of the Product described in this Section 3.3 continues for a period beyond three (3) months, Tris may terminate this Agreement upon thirty (30) days’ notice in writing to IPC. IPC shall reimburse Tris for any failure to supply and late supply penalties and/or damages charged to Tris for late supply or non-supply caused by IPC’s failure to timely supply Product pursuant to Purchase Orders delivered to IPC in accordance with this Agreement. For clarity and audit purposes, such failure to supply penalties shall be supported by appropriate invoices detailing the failure to supply penalties issued by the affected customers and wholesallers of Tris. IPC shall reimburse Tris for such penalties and damages, within ten (10) days of receipt of invoice for same from Tris, provided that if such invoice is not timely paid, Tris may at its option offset such amounts owed against other amounts payable by Tris to IPC.
Supply of Materials Unless the parties otherwise agree in a Work Order, Manufacturer will supply, in accordance with the relevant approved raw material specifications, all materials to be used by Manufacturer in the performance of Services under a Work Order other than the Rhythm Materials specified in such Work Order. Rhythm or its designees will provide Manufacturer with the Rhythm Materials. Manufacturer agrees (a) to account for all Rhythm Materials, (b) not to provide Rhythm Materials to any third party (other than an Affiliate acting as a permitted subcontractor) without the express prior written consent of Rhythm, (c) not to use Rhythm Materials for any purpose other than conducting the Services, including, without limitation, not to analyze, characterize, modify or reverse engineer any Rhythm Materials or take any action to determine the structure or composition of any Rhythm Materials unless required * CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO RULE 406 PROMULGATED UNDER THE SECURITIES ACT OF 1933, AS AMENDED. pursuant to a signed Work Order, and (d) to destroy or return to Rhythm all unused quantities of Rhythm Materials according to Rhythm’s written directions.
Product Warranty; Product Liability (a) Except as set forth on Company Disclosure Schedule 4.23, the products produced, sold or delivered by the Company in conducting the Business have been in all material respects in conformity with all product specifications and all applicable Laws. To the Company’s Knowledge, the Company has no material Liability for damages in connection therewith or any other customer or product obligations not reserved against on the Balance Sheet.
API A. Reliant shall supply to Cardinal Health for Manufacturing and Packaging, at Reliant’s sole cost, the API and applicable reference standards in quantities sufficient to meet Reliant’s requirements for each Product as further set forth in Article 4. Prior to delivery of any of the API or reference standard to Cardinal Health for Manufacturing and Packaging, Reliant shall provide to Cardinal Health a copy of the API Material Safety Data Sheet (“MSDS”), as amended, and any subsequent revisions thereto. Reliant shall supply the API, reference standards, and Certificate of Analysis FOB the Facility no later than thirty (30) days before the scheduled Manufacture Date upon which such API will be used by Cardinal Health. Upon receipt of the API, Cardinal Health shall conduct identification testing of the API. Cardinal Health shall use the API solely and exclusively for Manufacturing and Packaging under this Agreement. The maximum volume of API that Reliant supplies to Cardinal Health shall not exceed the amount reflected in the Firm Commitment and the next six (6) months of the Rolling Forecast.
Defective Products None of the Group Companies has manufactured, sold or supplied products which are, or were, in any material respect, faulty or defective, or which do not comply in any material respect with any representations or warranties expressly made by such Group Company, or with all applicable regulations, standards and requirements.
Product Warranty Each product manufactured, sold, leased, or delivered by the Company has been in conformity with all applicable contractual commitments and all express and implied warranties, and the Company has no Liability (and there is no basis for any present or future action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand against any of them giving rise to any Liability) for replacement or repair thereof or other damages in connection therewith, subject only to the reserve for product warranty claims set forth on the face of the balance sheet included in the Interim Financial Statements (rather than in any notes thereto) as adjusted for the passage of time through the Closing Date in accordance with the past custom and practice of the Company. No product manufactured, sold, leased, or delivered by the Company is subject to any guaranty, warranty, or other indemnity beyond the applicable standard terms and conditions of sale or lease. Section 4.22 of the Disclosure Schedule includes copies of the standard terms and conditions of sale or lease for the Company (containing applicable guaranty, warranty, and indemnity provisions).
Inability to Supply In the event that PerImmune is unable to supply [***] of Progenics' purchase orders for two consecutive quarters, then PerImmune agrees to provide Progenics the right and license to use the relevant Know-how to manufacture or have manufactured KLH for use in producing Ganglioside Vaccine, and to fully cooperate with regulatory authorities to qualify Progenics and/or its designee as a manufacturer of KLH. In such event, at Progenics' request, PerImmune shall promptly disclose to Progenics all Know-how and information reasonably necessary to manufacture KLH and the parties shall mutually agree upon a reasonable schedule for gradually reducing the amount of KLH purchased by Progenics from PerImmune, until such time PerImmune is able to reasonably demonstrate the ability to supply Progenics with its requirements.
Defective Product If Client rejects Products under Section 6.1 and the deviation is determined to have arisen from Patheon’s failure to provide the Manufacturing Services in accordance with the Specifications, cGMPs, or Applicable Laws, Patheon will credit Client’s account for Patheon’s invoice price for the defective Products. If Client previously paid for the defective Products, Patheon will promptly, at Client’s election, either: (i) refund the invoice price for the defective THIS EXHIBIT HAS BEEN REDACTED AND IS THE SUBJECT OF A CONFIDENTIAL TREATMENT REQUEST. REDACTED MATERIAL IS MARKED WITH [***] AND HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION. Products; (ii) offset the amount paid against other amounts due to Patheon hereunder; or (iii) replace the Products with conforming Products without Client being liable for payment therefor under Section 3.1, contingent upon the receipt from Client of all Active Materials and Client-Supplied Components required for the manufacture of the replacement Products. For greater certainty, Patheon’s responsibility for any loss of Active Materials in defective Product will be captured and calculated in the Active Materials Yield under Section 2.2.
Product Quality (a) Tesoro warrants that all Products delivered under this Agreement or any Purchaser Order shall meet the latest applicable pipeline specifications for that Product upon receipt at the applicable Terminal and contain no deleterious substances or concentrations of any contaminants that may make it or its components commercially unacceptable in general industry application. Tesoro shall not deliver to any of the Terminals any Products which: (a) would in any way be injurious to any of the Terminals; (b) would render any of the Terminals unfit for the proper storage of similar Products; (c) would contaminate or otherwise downgrade the quality of the Products stored in commingled storage; (d) may not be lawfully stored at the Terminals; or (e) otherwise do not meet applicable Product specifications for such Product that are customary in the location of the Terminal. If, however, there are Products that do not have such applicable specifications, the specifications shall be mutually agreed upon by the Parties. Should Tesoro's commingled Products not meet or exceed the minimum quality standards set forth in this Agreement or any applicable Purchase Order, Tesoro shall be liable for all loss, damage and cost incurred thereby, including damage to Products of third parties commingled with Tesoro's unfit Products.
Product Warranty and Product Liability Schedule 5.17 of the Disclosure Schedule contains a true, correct and complete copy of Company’s standard warranty or warranties for sales of Products (as defined below) and, except as stated therein, there are no warranties, commitments or obligations with respect to the return, repair or replacement of Products. Schedule 5.17 of the Disclosure Schedule contains a description of all product liability claims and similar claims, actions, litigation and other proceedings relating to Products which are presently pending or which to Company’s knowledge are threatened, or which have been asserted or commenced against Company within the last two (2) years, in which a party thereto either requests injunctive relief (whether temporary or permanent) or alleges damages in excess of $100,000.00 (whether or not covered by insurance). To the best of the Company’s knowledge, there are no defects in design, construction or manufacture of Products which would adversely affect performance or create an unusual risk of injury to persons or property. Except as set forth on Schedule 5.17, none of the Products has been the subject of any replacement, field fix, retrofit, modification or recall campaign other than in the ordinary course of business. The Products have been designed and manufactured so as to meet and comply with all governmental standards and specifications currently in effect, and have received all governmental approvals necessary to allow their sale and use. As used herein, the term “Products” means any and all products currently or at any time previously manufactured, distributed or sold by Company, or by any predecessor of Company under any brand name or xxxx under which products are or have been manufactured over the last three (3) years, distributed or sold by Company, in or through the Business. [*] = CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS, HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS AMENDED.
