Common use of Contractor Performance Requirements Clause in Contracts

Contractor Performance Requirements. A. Contractor shall provide portable water readily available at all times for each crew. B. Contractor shall conform to all South Coast Air Quality Management District’s (hereinafter referred to as “AQMD”) regulations, which may apply to the types of equipment utilized under this Contract. C. Equipment, Tools, and Manpower: Contractor shall furnish all hand tools, power equipment, and safety equipment necessary to accomplish the specified work. Equipment, Tools, and Manpower shall consist of, but not be limited to the following: 1. Contractor shall provide one (1) track layer tractor equipment with dirt pads with grousers worn not to exceed manufacture’s specifications. The tractor used for pulling a disc shall be of a track layer type of the size and horsepower capable of pulling a double throw disc on slopes up to 35%. Tractor must be a minimum of 90 horsepower at the flywheel. Certification of horsepower shall be provided upon County’s Project Manager’s request. 2. Contract shall provide one (1) double throw disc. 3. Contractor shall provide one (1) truck transport with tilt trailer. 4. Contractor shall provide one (1) rubber tire tractor. The rubber tire tractor for pulling a double throw, hydraulically actuated wheeled disc shall be provided for use in gentle terrain where frequent loading and unloading proves impractical. Tractor must be a minimum of 50 horsepower at the flywheel, and certification of horsepower will also be provided. 5. Contractor shall provide two (2) high side hydraulic dump trucks equipped with rear flashing lights and traffic control cones. 6. Hand tools shall include gas powered weed eaters, chain saws, whip hoes, shovels, hoes, ▇▇▇▇▇, trash cans and/or tarps and other tools and equipment as required for the removal of weeds, debris, and vegetative growth. 7. Contractor shall provide a minimum of two (2) four-man hand crews with supervision, transportation, and tools. If more than two hand crews may be necessary to complete work Contractor shall have sufficient additional resources available to respond to additional work requirements as required by County. 8. Hauling equipment: suitable flatbed hydraulic dump trucks with high sides for hauling are to be provided throughout handwork operations. All equipment shall be kept in good repair and conform to all State and local laws. All trucks shall be equipped with rear flashing lights and traffic control cones.

Contractor Performance Requirements. A. Contractor shall provide portable water readily available at all times for each crew. B. Contractor shall conform to all South Coast Air Quality Management District’s (hereinafter referred to as “AQMD”) regulations, which may apply to the types of equipment utilized under this Contract. C. Equipment, Tools, and Manpower: Contractor shall furnish all hand tools, power equipment, and safety equipment necessary to accomplish the specified work. Equipment, Tools, and Manpower shall consist of, but not be limited to the following: 1. Contractor shall provide one (1) track layer tractor equipment with dirt pads with grousers worn not to exceed manufacture’s specifications. The tractor used for or pulling a disc shall be of a track layer type of the size and horsepower capable of pulling a double throw disc on slopes up to 35%. Tractor must be a minimum of 90 horsepower at the flywheel. Certification of horsepower shall be provided upon County’s Project Manager’s request.s Project 2. Contract shall provide one (1) double throw disc. 3. Contractor shall provide one (1) truck transport with tilt trailer. 4. Contractor shall provide one (1) rubber tire tractor. The rubber tire tractor for pulling a double throw, hydraulically actuated wheeled disc shall be provided for use in gentle terrain where frequent loading and unloading proves impractical. Tractor must be a minimum of 50 horsepower at the flywheel, and certification of horsepower will also be provided. 5. Contractor shall provide two (2) high side hydraulic dump trucks equipped with rear flashing lights and traffic control cones. 6. Hand tools shall include gas powered weed eaters, chain saws, whip hoes, shovels, hoes, ▇▇▇▇▇, trash cans and/or tarps and other tools and equipment as required for the removal of weeds, debris, and vegetative growth. 7. Contractor shall provide a minimum of two (2) four-man hand crews with supervision, transportation, and tools. If more than two hand crews may be necessary to complete work Contractor shall have sufficient additional resources available to respond to additional work requirements as required by CountyCounty and District. 8. Hauling equipment: suitable flatbed hydraulic dump trucks with high sides for hauling are to be provided throughout handwork operations. All equipment shall be kept in good repair and conform to all State and local laws. All trucks shall be equipped with rear flashing lights and traffic control cones.